按条件检索“993”条记录

已选条件: 出版年: 2015 × 机构: 机械工程学院 × 机构: 信息科学与工程... ×
导出
  • 排序
  • 显示
1. 基于X7150B铣床的开发谈机床的设计改进

作者:徐建国;韩玉勇;崔玉国;秦峰;

作者机构:[徐建国]滕州市中等职业教育中心学校;[韩玉勇]枣庄科技职业学院;[崔玉国]山东大学机械工程学院;[秦峰]山东华强精密机床有限公司

来源:现代制造技术与装备,Modern Manufacturing Technology and Equipment,2015,Issue.01,47-48

资源类型:期刊论文

2. Effect of Mo2C/(Mo2C + WC) weight ratio on the microstructure and mechanical properties of Ti(C, N)-based cermet tool materials SCIE

作者:Xu, Qingzhong; Zhao, Jun; Ai, Xing; Qin, Wenzhen; Wang, Dawei; Huang, Weimin

作者机构:[Xu, Qingzhong; Zhao, Jun; Ai, Xing; Qin, Wenzhen; Wang, Dawei; Huang, Weimin] Shandong Univ, Key Lab High Efficiency & Clean Mech Mfg, MOE, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:JOURNAL OF ALLOYS AND COMPOUNDS,2015,Vol.649,885-890

WOS被引数:9

资源类型:期刊论文

WOS:000361159000122

3. Optimization of machining parameters for micro-machining nozzle based on characteristics of surface roughness EI SCOPUS SCIE

作者:Cai, Yukui; Liu, Zhanqiang; Shi, Zhenyu; Song, Qinghua; Wan, Yi

作者机构:[Cai, Yukui; Liu, Zhanqiang; Shi, Zhenyu; Song, Qinghua; Wan, Yi] Shandong Univ, Key Lab High Efficiency & Clean Mech Mfg, Minist Educ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,Vol.80,Issue.5-8,1403-1410

WOS被引数:6

资源类型:期刊论文

WOS:000360700900055

4. Frequency-specific functional connectivity revealed by wavelet-based coherence analysis in elderly subjects with cerebral infarction using NIRS method SCOPUS SCIE

作者:Tan, Qitao; Zhang, Ming; Wang, Yi; Zhang, Manyu; Wang, Yan; Xin, Qing; Wang, Bitan; Li, Zengyong

作者机构:[Tan, Qitao; Zhang, Manyu; Wang, Bitan; Li, Zengyong] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Peoples R China.; [Zhang, Ming; Wang, Yan] Hong Kong Polytech Univ, Fac Engn, Interdisciplinary Div Biomed Engn, Kowloon, Hong Kong, Peoples R China.; [Wang, Yi] Jinan Cent Hosp, Jinan 250013, Peoples R China.; [Xin, Qing] Hosp Shandong Univ, Jinan 250061, Peoples R China.

来源:MEDICAL PHYSICS,2015,Vol.42,Issue.9,5391-5403

WOS被引数:6

资源类型:期刊论文

WOS:000360645000039

5. Design and analysis on a pressure control device to setting load for hydraulic support in coal face EI

作者:Lianmin, Cao ;Fan, Zhang ;Weiyang, Chen ;Lianjun, Chen

作者机构:[Lianmin, Cao ;Fan, Zhang ;Weiyang, Chen ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qing Dao, China;[Lianmin, Cao ;Lianjun, Chen ] State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qing Dao, China

来源:Open Mechanical Engineering Journal,2015,Vol.9,Issue.1,362-366

资源类型:期刊论文

6. Study on chip morphology and milling characteristics of laser cladding layer EI SCOPUS SCIE

作者:Zhao, Yanhua; Sun, Jie; Li, Jianfeng

作者机构:[Zhao, Yanhua; Sun, Jie; Li, Jianfeng] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Zhao, Yanhua; Sun, Jie; Li, Jianfeng] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,Vol.77,Issue.5-8,783-796

WOS被引数:8

资源类型:期刊论文

WOS:000350120000002

7. Dual probability selection mapping algorithm for video transmission over wireless sensor networks EI

作者:Wang, Qiyong ;Li, Guangming ;Wang, Chengyou ;Sun, Wen

作者机构:[Wang, Qiyong ;Li, Guangming ;Wang, Chengyou ;Sun, Wen ] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai; 264209, China

来源:Journal of Communications,2015,Vol.10,Issue.3,192-198

资源类型:期刊论文

8. Thermal error prediction and compensation of YK3610 hobbing machine based on BP neural networks EI

作者:Guo, Qianjian ;Xu, Rufeng ;Qi, Xiaoni

作者机构:[Guo, Qianjian ;Xu, Rufeng ] School of Mechanical Engineering, Shandong University of Technology, Zibo, China;[Qi, Xiaoni ] School of Transportation and Vehicle Engineering, Shandong University of Technology, Zibo, China

来源:Open Mechanical Engineering Journal,2015,Vol.9,Issue.1,678-681

资源类型:期刊论文

9. 304L不锈钢在氯离子溶液中的应力腐蚀特性研究

作者:孙军;周成;王瑞岩;钟允攀;刘海滨;褚言会;

作者机构:[孙军;周成;王瑞岩;钟允攀;刘海滨;褚言会]合肥皖化电机技术开发有限责任公司;[孙军;周成;王瑞岩;钟允攀;刘海滨;褚言会]青岛市特种设备检验检测研究院;[孙军;周成;王瑞岩;钟允攀;刘海滨;褚言会]山东大学机械工程学院

来源:齐鲁工业大学学报(自然科学版),Journal of Shandong Institute of Light Industry (Natural Science Edition),2015,Issue.03,69-74

资源类型:期刊论文

10. 未来刀具——微纳织构涂层刀具研究进展

作者:张克栋[1];邓建新[1];姜超[1];陈帅[1];刘亚运[1]

作者机构:[张克栋;邓建新;姜超;陈帅;刘亚运]山东大学机械工程学院,中国

来源:航空制造技术,Aeronautical Manufacturing Gechnology,2015,Issue.06,36-42

资源类型:期刊论文

11. Tribological behaviors of two micro textured surfaces generated by vibrating milling under boundary lubricated sliding EI SCOPUS SCIE

作者:Shen, Xue-Hui; Tao, Guo-Can

作者机构:[Shen, Xue-Hui] Qilu Univ Technol, Dept Mech & Automot Engn, Jinan 250353, Peoples R China.; [Tao, Guo-Can] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,Vol.79,Issue.9-12,1995-2002

WOS被引数:8

资源类型:期刊论文

WOS:000358548700050

12. VBHF system research basing on the technology of fuzzy PID control EI

作者:Su, Chun-Jian ;Zhao, Jun-Min

作者机构:[Su, Chun-Jian ;Zhao, Jun-Min ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, China

来源:Open Mechanical Engineering Journal,2015,Vol.9,Issue.1,514-520

资源类型:期刊论文

13. 频谱分析法在振动时效系统中的实验研究

作者:梁西昌;万熠;朱振杰;寇兆军;张东;

作者机构:[梁西昌;万熠;朱振杰;寇兆军;张东]山东大学机械工程学院高效洁净机械制造教育部重点实验室;[梁西昌;万熠;朱振杰;寇兆军;张东]山东大学齐鲁医院

来源:实验技术与管理,2015,Issue.02,65-68

资源类型:期刊论文

14. Study on crack sensitivity and tribological characterisation of functionally gradient material multi-layer by laser cladding with powder mixture of Ni-based alloy and tungsten carbide EI SCOPUS SCIE

作者:Zhao, Yanhua; Sun, Jie; Li, Jianfeng

作者机构:[Sun, Jie] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING,2015,Vol.9,Issue.4,370-383

资源类型:期刊论文

WOS:000364814800007

15. Fault diagnosis of rolling element bearings based on EMD and MKD EI

作者:Sui, Wen-Tao ;Zhang, Dan ;Wang, Wilson

作者机构:[Sui, Wen-Tao ] School of Mechanical Engineering, Shandong University of Technology, Zibo; 255049, China;[Wang, Wilson ] Dept. of Mechanical Engineering, Lakehead University, Thunder Bay; ON; P7B 5E1, Canada;[Zhang, Dan ] School of Electrical & Electronic Engineering, Shandong University of Technology, Zibo; 255049, China

来源:Zhendong yu Chongji/Journal of Vibration and Shock,2015,Vol.34,Issue.9,55-59 and 64

资源类型:期刊论文

16. Microstructure of the (100) and (111) facets of Boron-doped diamonds under HPHT EI SCOPUS

作者:Gong, J.H. ;Chen, Q.L. ;Liu, S.N. ;Yang, L.M. ;Gao, J. ;Li, W. ;Bin, X.

作者机构:[Gong, J.H. ;Chen, Q.L. ;Liu, S.N. ;Yang, L.M. ;Gao, J. ;Li, W. ] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai; 264209, China;[Bin, X. ] School of Materials Science and Engineering, Shandong Jianzhu University, Jinan; 250101, China

来源:Materials Research Innovations,2015,Vol.19,S932-S936

资源类型:期刊论文

17. Evaluation of the performance of a passive-active vibration isolation system EI SCOPUS SCIE

作者:Sun, L. L.; Hansen, C. H.; Doolan, C.

作者机构:[Sun, L. L.] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Hansen, C. H.; Doolan, C.] Univ Adelaide, Sch Mech Engn, Adelaide, SA 5005, Australia.

来源:MECHANICAL SYSTEMS AND SIGNAL PROCESSING,2015,Vol.50-51,480-497

WOS被引数:7

资源类型:期刊论文

WOS:000343687200032

18. 基于专利的效应库研究及软件开发

作者:徐志刚;刘涛涛;

作者机构:[徐志刚;刘涛涛]山东大学机械学院CAD/CAM研究所

来源:智能计算机与应用,Intelligent Computer and Applications,2015,Issue.01,29-31+35

资源类型:期刊论文

19. Effect of Gravity on the Hydrodynamics in an Unbaffled Stirred Vessel EI SCOPUS SCIE

作者:Yang, Feng L.; Zhou, Shen J.

作者机构:[Yang, Feng L.; Zhou, Shen J.] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Yang, Feng L.; Zhou, Shen J.] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan 250061, Peoples R China.

来源:CHEMICAL ENGINEERING & TECHNOLOGY,2015,Vol.38,Issue.5,819-826

WOS被引数:2

资源类型:期刊论文

WOS:000353515100008

20. In-situ Fabricated TiB_2 Particle-whisker Synergistically Toughened Ti(C,N)-based Ceramic Cutting Tool Material

作者:LIU Hanlian;SHI Qiang;HUANG Chuanzhen;ZOU Bin;XU Liang;WANG Jun;

作者机构:[LIU Hanlian;SHI Qiang;HUANG Chuanzhen;ZOU Bin;XU Liang;WANG Jun]School of Mechanical Engineering, Shandong University;[LIU Hanlian;SHI Qiang;HUANG Chuanzhen;ZOU Bin;XU Liang;WANG Jun]Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Shandong University),Ministry of Education

来源:Chinese Journal of Mechanical Engineering,2015,Issue.02,338-342

资源类型:期刊论文

共 50 页, 993 条记录

TOP