按条件检索“8,369”条记录

已选条件: 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
1. 基于割台升降系统电液比例多路阀特性研究

作者:张振华;李瑞川;杨俊茹;徐继康;刘延俊;

作者机构:[张振华]山东科技大学机械电子工程学院,中国.;[李瑞川]山东海卓电液控制工程技术研究院,中国.;[杨俊茹]日照海卓液压有限公司,中国.;[徐继康]山东大学机械工程学院,中国.;[刘延俊]山东大学海洋研究院,中国

来源:农机化研究,2020,Issue.01,31-36

资源类型:期刊论文

2. 1SZL-420型智能深松整地联合作业机的设计与试验

作者:沈景新;焦伟;孙永佳;王钦祥;孙宜田;李青龙;陈刚

作者机构:[沈景新;焦伟;孙永佳;王钦祥;孙宜田;李青龙;陈刚]山东省农业机械科学研究院.;[沈景新;焦伟;孙永佳;王钦祥;孙宜田;李青龙;陈刚]山东大学机械工程学院

来源:农机化研究,2020,Issue.02,85-90

资源类型:期刊论文

3. A hybrid multi-objective optimization approach for energy-absorbing structures in train collisions EI SCOPUS SCIE

作者:Zhang, Honghao; Peng, Yong; Hou, Lin; Tian, Guangdong; Li, Zhiwu

作者机构:[Zhang, Honghao; Peng, Yong; Hou, Lin] Cent S Univ, Sch Traff & Transportat Engn, Key Lab Traff Safety Track, Minist Educ, Changsha 410000, Hunan, Peoples R China.; [Zhang, Honghao; Peng, Yong] Cent S Univ, Joint Int Res Lab Key Technol Rail Traff Safety, Changsha 410000, Hunan, Peoples R China.; [Hou, Lin] Cent S Univ, Natl & Local Joint Engn Res Ctr Safety Technol Ra, Changsha 410000, Hunan, Peoples R China.; [Tian, Guangdong] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Li, Zhiwu] Macau Univ Sci & Technol, Inst Syst Engn, Taipa 999078, Macao, Peoples R China.; [Li, Zhiwu] Xidian Univ, Sch Electromech Engn, Xian 710071, Shaanxi, Peoples R China.

来源:INFORMATION SCIENCES,2019,Vol.481,491-506

WOS被引数:1

资源类型:期刊论文

WOS:000459846300031

4. Energy harvesting properties of the functionally graded flexoelectric microbeam energy harvesters EI SCOPUS SCIE

作者:Qi, Lu

作者机构:[Qi, Lu] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Qi, Lu] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.

来源:ENERGY,2019,Vol.171,721-730

资源类型:期刊论文

WOS:000461534400058

5. 超临界流体染色及其装备研究(四)

作者:瞿德浩;王威强;孙发玉;胡德栋;袁淑英

作者机构:[瞿德浩;王威强;孙发玉;胡德栋;袁淑英]山东大学机械工程学院山大鲁南超临界流体技术研究所.;[瞿德浩;王威强;孙发玉;胡德栋;袁淑英]青岛科技大学机电工程学院

来源:印染,2019,Issue.16,47-50

资源类型:期刊论文

6. A comparative study on uniaxial tensile property calculation models in spherical indentation tests (SITs) EI SCOPUS SCIE

作者:Zhang, Tairui; Wang, Shang; Wang, Weiqiang

作者机构:[Zhang, Tairui; Wang, Shang; Wang, Weiqiang] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Zhang, Tairui; Wang, Shang; Wang, Weiqiang] Engn & Technol Res Ctr Special Equipment Safety S, Jinan 250061, Shandong, Peoples R China.; [Zhang, Tairui; Wang, Shang; Wang, Weiqiang] Res Ctr Safety Guarantee & Assessment Special Equ, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2019,Vol.155,159-169

资源类型:期刊论文

WOS:000468721800013

7. 新型动静压转台油膜力及动态特性研究 CSCD

作者:聂玉龙; 马金奎; 陈淑江; 田再浩

作者机构:[聂玉龙]山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国;[马金奎]山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国;[陈淑江]山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国;[田再浩]山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.

来源:润滑与密封,Lubrication Engineering,2019,Vol.44,Issue.11

资源类型:期刊论文

8. Look-ahead gear-shifting strategy on ramps for heavy trucks with automated mechanical transmission SCOPUS SCIE

作者:Cong, Xiao-yan; Zhang, Yong-gang; Wang, Chun-peng; Zhu, Hong-xuan; Wang, Zeng-cai

作者机构:[Cong, Xiao-yan; Wang, Chun-peng; Zhu, Hong-xuan] Qingdao Univ Technol, Sch Art & Design, Bldg 2,11 Fushun Rd, Qingdao 266033, Shandong, Peoples R China.; [Zhang, Yong-gang] China Natl Heavy Duty Truck Grp Co Ltd, Ctr Res & Dev, Jinan, Shandong, Peoples R China.; [Wang, Zeng-cai] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Wang, Zeng-cai] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.

来源:ADVANCES IN MECHANICAL ENGINEERING,2019,Vol.11,Issue.1

资源类型:期刊论文

WOS:000460992900001

9. Robust fixture design of compliant assembly process based on a support vector regression model EI SCOPUS SCIE

作者:Yu, Kuigang

作者机构:[Yu, Kuigang] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Yu, Kuigang] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.; [Yu, Kuigang] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.103,Issue.1-4,111-126

资源类型:期刊论文

WOS:000475921300010

10. Evaluation of specific cutting energy considering effects of cutting tool geometry during micro-machining process EI SCOPUS SCIE

作者:Cui, P.; Shi, Z. Y.; Li, X.; Duan, N. M.

作者机构:[Cui, P.; Shi, Z. Y.; Li, X.; Duan, N. M.] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Cui, P.; Shi, Z. Y.; Li, X.; Duan, N. M.] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.102,Issue.5-8,1127-1139

资源类型:期刊论文

WOS:000469002200007

11. CNN特征与BOF相融合的水下目标识别算法 CSCD

作者:权稳稳; 林明星

作者机构:[权稳稳]山东大学机械工程学院, 济南, 山东 250061, 中国;[林明星]山东大学机械工程学院, 济南, 山东 250061, 中国.

来源:山东大学学报. 工学版,Journal of Shandong University. Engineering Science,2019,Vol.49,Issue.1,107-113

资源类型:期刊论文

12. 开放的设计=更多的可能

作者:王震亚;

作者机构:[王震亚]山东大学机械工程学院,中国

来源:设计,2019,Issue.18,64-68

资源类型:期刊论文

13. 基于遗传算法的一对一与多行设施布置设计 CSCD

作者:于俊甫; 于珍; 魏连兴

作者机构:[于俊甫]山东大学机械工程学院, 济南, 山东 250061, 中国;[于珍]山东大学机械工程学院, 济南, 山东 250061, 中国;[魏连兴]山东大学机械工程学院, 济南, 山东 250061, 中国.

来源:现代制造工程,Modern Manufacturing Engineering,2019,Issue.8,108-113

资源类型:期刊论文

14. Influence of surface integrity on fatigue behavior of Inconel 718 and Ti6Al4V workpieces with CBN electroplated wheel EI SCIE

作者:Li, Xun; Wang, Yixuan; Xu, Rufeng; Yang, Shenliang; Guan, Chunming; Zhou, Yongxin

作者机构:[Li, Xun; Wang, Yixuan; Yang, Shenliang; Guan, Chunming] Beihang Univ, Sch Mech Engn & Automat, Beijing 100083, Peoples R China.; [Xu, Rufeng; Zhou, Yongxin] Shandong Univ Technol, Sch Mech Engn, Zibo 255000, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.102,Issue.5-8

资源类型:期刊论文

WOS:000469002200095

15. Noise suppression threshold channel estimation method using RC and SRRC filters in OFDM systems EI SCOPUS

作者:Zhang, Mingtong ;Zhou, Xiao ;Wang, Chengyou

作者机构:[Zhang, Mingtong ;Zhou, Xiao ;Wang, Chengyou ] Electrical and Information Engineering, School of Mechanical, Shandong University, Weihai, China

会议名称:2018 18th IEEE International Conference on Communication Technology, ICCT 2018

会议日期:8 October 2018 through 11 October 2018

来源:International Conference on Communication Technology Proceedings, ICCT,2019,Vol.2019-October,176-180

资源类型:会议论文;期刊论文

16. ZL109硅铝合金车削加工表面质量研究

作者:孙虎;李安海;周咏辉;侯冠明;

作者机构:[孙虎]山东大学高效洁净机械制造教育部重点实验室,中国.;[李安海]山东大学机械工程学院,中国.;[周咏辉]高效洁净机械制造教育部重点实验室,中国.;[侯冠明]机械工程国家级试验教学示范中心(山东大学),中国

来源:工具技术,2019,Issue.04,6-11

资源类型:期刊论文

17. Optimum selection of tool materials for machining of high-strength steels based on fuzzy comprehensive evaluation method EI SCOPUS SCIE

作者:Xu, Qingzhong; Zhao, Jun; Ai, Xing; Huang, Weimin; Wang, Guijie

作者机构:[Xu, Qingzhong; Zhao, Jun; Ai, Xing; Huang, Weimin; Wang, Guijie] Shandong Univ, Sch Mech Engn, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2019,Vol.233,Issue.1,145-153

资源类型:期刊论文

WOS:000454115700013

18. Material Ductile Failure-Based Finite Element Simulations of Chip Serration in Orthogonal Cutting of Titanium Alloy Ti-6Al-4V EI SCOPUS SCIE

作者:Liu, Guoliang; Shah, Suril; Ozel, Tugrul

作者机构:[Liu, Guoliang; Shah, Suril; Ozel, Tugrul] Rutgers State Univ, Mfg & Automat Res Lab, Dept Ind & Syst Engn, Piscataway, NJ 08854 USA.; [Liu, Guoliang] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2019,Vol.141,Issue.4

资源类型:期刊论文

WOS:000460839400018

19. Feasibility study of the Ti(C7N3)-based cermet micro-mill based on dynamic fatigue behavior and modeling of the contact stress distribution on the round cutting edge SCOPUS SCIE

作者:Wang, Yishun; Zou, Bin; Huang, Chuanzhen; Qi, Huan; Song, Jinpeng

作者机构:[Wang, Yishun; Zou, Bin; Huang, Chuanzhen] Shandong Univ, Sch Mech Engn, Ctr Adv Jet Engn Technol CaJET, 17923 Jing Shi Rd, Jinan 250061, Shandong, Peoples R China.; [Wang, Yishun; Zou, Bin; Huang, Chuanzhen] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Wang, Yishun; Zou, Bin; Huang, Chuanzhen] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.; [Qi, Huan] Zhejiang Univ Technol, Key Lab Special Purpose Equipment & Adv Proc Tech, Minist Educ & Zhejiang Prov, Hangzhou 310014, Zhejiang, Peoples R China.; [Song, Jinpeng] Taiyuan Univ Technol, Sch Mech Engn, Taiyuan 030024, Shanxi, Peoples R China.

来源:INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2019,Vol.155,143-158

资源类型:期刊论文

WOS:000468721800012

20. Surface quality evaluation of single crystal 4H-SiC wafer machined by hybrid laser-waterjet: Comparing with laser machining EI SCOPUS SCIE

作者:Feng, Shaochuan; Huang, Chuanzhen; Wang, Jun; Jia, Zhixin

作者机构:[Feng, Shaochuan; Jia, Zhixin] Univ Sci & Technol Beijing, Sch Mech Engn, Beijing 100083, Peoples R China.; [Huang, Chuanzhen] Shandong Univ, Sch Mech Engn, Minist Educ, Ctr Adv Jet Engn Technol CaJET,Key Lab High Effic, Jinan 250061, Shandong, Peoples R China.; [Wang, Jun] UNSW, Sch Mech & Mfg Engn, Sydney, NSW 2052, Australia.

来源:MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING,2019,Vol.93,238-251

资源类型:期刊论文

WOS:000457727300029

共 419 页, 8,369 条记录

TOP