按条件检索“939”条记录

已选条件: 数据来源: SCOPUS × 出版年: 2014 × 机构: 机械工程学院 × 机构: 信息科学与工程... × 机构: 控制科学与工程... ×
导出
  • 排序
  • 显示
1. Study on the synthesis and growth mechanisms of the refractory ZrC whiskers SCOPUS SCIE

作者:Xu, Liang; Huang, Chuanzhen; Liu, Hanlian; Zou, Bin; Zhu, Hongtao; Zhao, Guolong; Wang, Jun

作者机构:[Huang, Chuanzhen] Shandong Univ, CaJET, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS,2014,Vol.42,116-119

WOS被引数:7

资源类型:期刊论文

WOS:000329553500017

2. 一种基于数字控制的一阶时滞不稳定系统 P和PI控制器设计方法 CSCD SCOPUS

作者:Leng,Tongtong;Yan,Peng

作者机构:[冷同同] 高效洁净机械制造教育部重点实验室(山东大学);山东大学机械工程学院, 济南, 山东 250061, 中国.;[闫鹏] 高效洁净机械制造教育部重点实验室(山东大学);山东大学机械工程学院, 济南, 山东 250061, 中国

来源:中国科学技术大学学报,Journal of University of Science and Technology of China,2014,Vol.44,Issue.10,804-810

资源类型:期刊论文

3. Assembly variation analysis of three dimensional compliant sheet metal parts under an over-located condition EI SCOPUS

作者:Yu, Kui-Gang ;Yang, Zhi-Hong

作者机构:[Yu, Kui-Gang ;Yang, Zhi-Hong ] School of Mechanical Engineering, Shandong University, No. 17923. Jingshi Road, Jinan, China;[Yu, Kui-Gang ;Yang, Zhi-Hong ] Key Laboratory of High-efficiency and Clean Mechanical Manufacturing (Shandong University), Ministry of Education, No. 17923. Jingshi Road, Jinan, China

来源:WSEAS Transactions on Systems,2014,Vol.13,Issue.1,213-222

资源类型:期刊论文

4. Effectiveness of a Passive-active Vibration Isolation System with Actuator Constraints EI SCOPUS SCIE

作者:Sun Lingling; Sun Wei; Song Kongjie; Hansen, Colin H.

作者机构:[Sun, L] Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Jinan 250061, China, School of Mechanical Engineering, University of Adelaide, South Australia 5005, Australia;[ Sun, W] Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Jinan 250061, China;[ Song, K] Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Jinan 250061, China;[ Hansen, C. H] School of Mechanical Engineering, University of Adelaide, South Australia 5005, Australia

来源:中国机械工程学报,CHINESE JOURNAL OF MECHANICAL ENGINEERING,2014,Vol.27,Issue.3,567-574

WOS被引数:1

资源类型:期刊论文

WOS:000335719500017

5. Interface toughness of a zirconia-veneer system and the effect of a liner application SCOPUS SCIE

作者:Wang,G.;Zhang,S.;Bian,C.;Kong,H.

作者机构:[Wang, G] School of Mechanical Engineering, Shandong University, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Jinan, China;[ Zhang, S] School of Mechanical Engineering, Shandong University, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Jinan, China;[ Bian, C] Department of Prosthodontics, Qilu Hospital of Shandong University, Jinan, China;[ Kong, H] Department of Prosthodontics, Qilu Hospital of Shandong University, Jinan, China

来源:The Journal of Prosthetic Dentistry,JOURNAL OF PROSTHETIC DENTISTRY,2014,Vol.112,Issue.3,576-583

WOS被引数:11

资源类型:期刊论文

WOS:000341541100029

6. Tool Wear and Formation Mechanism of White Layer When Hard Milling H13 Steel under Different Cooling/Lubrication Conditions SCOPUS SCIE

作者:Zhang, Song; Li, Jianfeng; Lv, Honggang

作者机构:[Zhang, Song; Li, Jianfeng; Lv, Honggang] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Zhang, Song; Li, Jianfeng; Lv, Honggang] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan 250061, Peoples R China.

来源:ADVANCES IN MECHANICAL ENGINEERING,2014

WOS被引数:4

资源类型:期刊论文

WOS:000334758700001

7. The effect of sintering additives on ceramic material sintering densification process based on cellular automata model EI SCOPUS SCIE

作者:Min, Wang; Xing, Ai; Jun, Zhao

作者机构:[Min, Wang] China Univ Petr, Coll Mech & Elect Engn, Qingdao 266580, Peoples R China.; [Xing, Ai; Jun, Zhao] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:COMPUTATIONAL MATERIALS SCIENCE,2014,Vol.90,16-22

资源类型:期刊论文

WOS:000336656200003

8. Vibration characteristic analysis of the multi-drilling mechanism EI SCOPUS SCIE

作者:Cui, Xinxia; Ji, Huifu; Lin, Mingxing; Dong, Ziang

作者机构:[Cui, Xinxia; Ji, Huifu] China Univ Min & Technol, Sch Mech & Elect Engn, Xuzhou 221116, Peoples R China.; [Lin, Mingxing] Shandong Univ, Coll Mech Engn, Jinan 250061, Peoples R China.; [Dong, Ziang] Changsha Inst Min Res Co Ltd, Changsha 410000, Hunan, Peoples R China.

来源:JOURNAL OF VIBROENGINEERING,2014,Vol.16,Issue.6,2722-2734

WOS被引数:2

资源类型:期刊论文

WOS:000342905300011

9. Modeling and analysis of helical groove grinding in end mill machining EI SCOPUS SCIE

作者:Li, Guochao; Sun, Jie; Li, Jianfeng

作者机构:[Li, Guochao; Sun, Jie; Li, Jianfeng] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, MOE, Jinan 250100, Peoples R China.

来源:JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2014,Vol.214,Issue.12,3067-3076

WOS被引数:10

资源类型:期刊论文

WOS:000342245500025

10. Modeling and analysis of SMER constraints violation in IRBAC 2000 model based on colored petri nets EI SCOPUS

作者:Liu, Meng ;Wang, Xuan

作者机构:[Liu, Meng ;Wang, Xuan ] Computer Application Research Center, Harbin Institute of Technology, Shenzhen Graduate School, Shenzhen 518055, China;[Liu, Meng ] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China

来源:International Journal of Security and its Applications,2014,Vol.8,Issue.1,19-32

资源类型:期刊论文

11. Ingredient of Biomass Packaging Material and Compare Study on Cushion Properties SCOPUS SCIE

作者:Li, Fangyi; Guan, Kaikai; Liu, Peng; Li, Gang; Li, Jianfeng

作者机构:[Li, Fangyi; Guan, Kaikai; Liu, Peng; Li, Gang; Li, Jianfeng] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Li, Fangyi; Guan, Kaikai; Liu, Peng; Li, Gang; Li, Jianfeng] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan 250061, Peoples R China.; [Li, Gang] Shandong Kerui Holding Grp Co LTD, Dongying 257067, Peoples R China.

来源:INTERNATIONAL JOURNAL OF POLYMER SCIENCE,2014

WOS被引数:2

资源类型:期刊论文

WOS:000330674600001

12. The inverse prediction for profile extrusion die based on the finite element method EI SCOPUS

作者:Zhang, Min ;Huang, Chuan Zhen ;Jia, Yu Xi ;Liu, Jin Long

作者机构:[Zhang, Min ;Huang, Chuan Zhen ;Liu, Jin Long ] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[Jia, Yu Xi ] School of Material Science and Engineering, Shandong University, Jinan 250061, China;[Zhang, Min ;Huang, Chuan Zhen ] Ministry of Education Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Jinan 250061, China

来源:Advanced Materials Research,2014,Vol.941-944,2332-2335

资源类型:会议论文;期刊论文

13. Friction and Wear Behavior of WS_2/Zr Self-lubricating Soft Coatings in Dry Sliding Against 40Cr-Hardened Steel Balls EI SCOPUS SCIE

作者:Yunsong Lian;Jianxin Deng;Shipeng Li;Guangyuan Yan;Shuting Lei

作者机构:[Lian, Y] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Deng, J] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Li, S] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Yan, G] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Lei, S] Department of Industrial and Manufacturing Systems Engineering, Kansas State University, Manhattan, KS 66506, United States

来源:Tribology letters,TRIBOLOGY LETTERS,2014,Vol.53,Issue.1,237-246

WOS被引数:11

资源类型:期刊论文

WOS:000329317800023

14. Wavelet coherence analysis of spontaneous oscillations in cerebral tissue oxyhemoglobin concentrations and arterial blood pressure in elderly subjects SCOPUS SCIE

作者:Cui, Ruofei; Zhang, Ming; Li, Zengyong; Xin, Qing; Lu, Liqian; Zhou, Weiei; Han, Qingyu; Gao, Yuanjin

作者机构:[Cui, Ruofei; Li, Zengyong; Lu, Liqian; Zhou, Weiei; Han, Qingyu; Gao, Yuanjin] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg, Jinan 250061, Peoples R China.; [Zhang, Ming] Hong Kong Polytech Univ, Fac Engn, Interdisciplinary Div Biomed Engn, Kowloon, Hong Kong, Peoples R China.; [Xin, Qing] Hosp Shandong Univ, Jinan 250061, Peoples R China.

来源:MICROVASCULAR RESEARCH,2014,Vol.93,14-20

WOS被引数:11

资源类型:期刊论文

WOS:000336562000003

15. 基于复合材料钻削缺陷容差值的工艺参数优化 EI SCOPUS

作者:李桂玉;汪海晋;孙杰;李剑峰;李卫东;

作者机构:[李桂玉;汪海晋;孙杰;李剑峰;李卫东]山东大学机械工程学院高效洁净机械制造教育部重点实验室;[李桂玉;汪海晋;孙杰;李剑峰;李卫东]东营职业学院石油装备与机电工程学院;[李桂玉;汪海晋;孙杰;李剑峰;李卫东]成都飞机工业(集团)有限公司

来源:复合材料学报,Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica,2014,Vol.31,Issue.4,1022-1029

资源类型:期刊论文

16. 基于CFD离散相模型的气流式皮棉清理机参数优化 EI CSCD SCOPUS

作者:董全成;冯显英

作者机构:[董全成] 山东大学, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[冯显英] 山东大学, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:农业工程学报,Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering,2014,Vol.30,Issue.2,9-16

资源类型:期刊论文

17. The wear of Al2O3-based Ceramic Cutting Tool in high-speed face milling of AISI H13 steel CPCI-S SCOPUS

作者:Zhou Yonghui; Zhao Jun; Cui Xiaobin

作者机构:[Zhou Yonghui; Zhao Jun; Cui Xiaobin] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

会议名称:15th International Manufacturing Conference in China

会议日期:OCT 16-18, 2013

来源:ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XV,2014,Vol.770,226-229

资源类型:会议论文;期刊论文

WOS:000336633400048

18. Study on Main Function and Key Technology of Enterprises Contingency Plan Virtual Drill System Based on Virtools CPCI-S EI SCOPUS

作者:Han Yunpeng; Meng Jianfeng; Meng Jianjun; Zhang Weishuai

作者机构:[Han Yunpeng; Meng Jianfeng] Shandong Univ, Sch Mech Engn, Jinan 250100, Peoples R China.; [Meng Jianjun] Shandong Tobacco Ind Co Ltd, Jinan, Peoples R China.; [Zhang Weishuai] Jinan PengBo Digital Secur Technol Co Ltd, Jinan, Peoples R China.

会议名称:3rd International Conference on Materials Science and Engineering (ICMSE 2014)

会议日期:JAN 24-26, 2014

来源:MATERIAL SCIENCE AND ADVANCED TECHNOLOGIES IN MANUFACTURING,2014,Vol.852,593-596

资源类型:会议论文;期刊论文

WOS:000336633800116

19. Consensusability of multi-agent systems with time-varying communication delay EI SCOPUS SCIE

作者:Wang, Zhenhua; Xu, Juanjuan; Zhang, Huanshui

作者机构:[Wang, Zhenhua; Xu, Juanjuan; Zhang, Huanshui] Shandong Univ, Sch Control Sci & Engn, Jinan 250061, Shandong, Peoples R China.

来源:SYSTEMS & CONTROL LETTERS,2014,Vol.65,Issue.1,37-42

WOS被引数:30

资源类型:期刊论文

WOS:000333787100005

20. Optimization of machining parameters in the abrasive waterjet turning of alumina ceramic based on the response surface methodology EI SCOPUS SCIE

作者:Yue, Zhongbo; Huang, Chuanzhen; Zhu, Hongtao; Wang, Jun; Yao, Peng; Liu, ZengWen

作者机构:[Yue, Zhongbo; Huang, Chuanzhen; Zhu, Hongtao; Wang, Jun; Yao, Peng; Liu, ZengWen] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Sch Mech Engn, Ctr Adv Jet Engn Technol CaJET,Minist Educ, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2014,Vol.71,Issue.9-12,2107-2114

WOS被引数:18

资源类型:期刊论文

WOS:000333394300052

共 47 页, 939 条记录

TOP