按条件检索“42”条记录

已选条件: 数据来源: SCOPUS × 出版年: 2018 × 机构: 机械工程学院 × 机构: 材料科学与工程... × 文献类型: articleinpress ×
导出
  • 排序
  • 显示
1. Preparation of amino-modified hydroxyapatite and its uranium adsorption properties SCOPUS

作者:Feng Y.; Ma B.; Guo X.; Sun H.; Zhang Y.; Gong H.

作者机构:[Feng, Y] Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan, 250061, China;[ Ma, B] Shandong Sanshan Highway Engineering Supervision Consulting Co. Ltd., Liaocheng, 252031, China;[ Guo, X] School of Materials Science and Engineering, Shandong University of Technology, Zibo, 255049, China;[ Sun, H] School of Materials Science and Engineering, Shandong University of Technology, Zibo, 255049, China;[ Zhang, Y] Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan, 250061, China;[ Gong, H] Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan, 250061, China

来源:Journal of Radioanalytical and Nuclear Chemistry,2018

资源类型:期刊论文

2. Uniform Metal-Assisted Chemical Etching for Ultra-High-Aspect-Ratio Microstructures on Silicon SCOPUS

作者:Li L.; Tuan C.; Zhang C.; Chen Y.; Lian G.; Wong C.

作者机构:[Li, L] School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332 USA (e-mail: lli306@gatech.edu).;[ Tuan, C] School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332 USA.;[ Zhang, C] School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332 USA, and also with the School of Materials Science and Engineering, Southeast University, Nanjing 211189, China.;[ Chen, Y] School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332 USA, also with the School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China, and also with the Key Laboratory of Mechanical Equipment Manufacturing and Control Technology of Ministry of Education, Guangzhou 510006, China.;[ Lian, G] School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332 USA, and also with the State Key Lab of Crystal Materials, Shandong University, Jinan 250100, China.;[ Wong, C] School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332 USA, and also with the Department of Electronic Engineering, The Chinese University of Hong Kong, Hong Kong (e-mail: cpwong@cuhk.edu.hk).

来源:Journal of Microelectromechanical Systems,2018

资源类型:期刊论文

3. Panorama of boron nitride nanostructures via lamp ablation SCOPUS

作者:Eshon S.; Zhang W.; Saunders M.; Zhang Y.; Chua H.T.; Gordon J.M.

作者机构:[Eshon, S] Department of Chemical Engineering, The University of Western Australia, Perth, WA 6009, Australia;[ Zhang, W] School of Environmental Science and Engineering, Taiyuan University of Technology, Taiyuan, 030024, China;[ Saunders, M] Centre for Microscopy, Characterisation and Analysis, The University of Western Australia, Perth, WA 6009, Australia;[ Zhang, Y] Department of Material Science and Engineering, Shandong University, Jinan, 250061, China;[ Chua, H.T] Department of Chemical Engineering, The University of Western Australia, Perth, WA 6009, Australia;[ Gordon, J.M] Department of Chemical Engineering, The University of Western Australia, Perth, WA 6009, Australia, Department of Solar Energy and Environmental Physics, Blaustein Institutes for Desert Research, Ben-Gurion University of the Negev, Sede Boqer Campus, Beersheba, 8499000, Israel

来源:Nano Research,2018

资源类型:期刊论文

4. A CO Adsorption Site Change Induced by Copper Substitution in a Ruthenium Catalyst for Enhanced CO Oxidation Activity SCOPUS

作者:Huang B.; Kobayashi H.; Yamamoto T.; Toriyama T.; Matsumura S.; Nishida Y.; Sato K.; Nagaoka K.; Haneda M.; Xie W.; Nanba Y.; Koyama M.; Wang F.; Kawaguchi S.; Kubota Y.; Kitagawa H.

作者机构:[Huang, B] Division of Chemistry, Graduate School of Science, Kyoto University, Kitashirakawa-Oiwakecho, Sakyo-ku, Kyoto, 606-8502, Japan;[ Kobayashi, H] Division of Chemistry, Graduate School of Science, Kyoto University, Kitashirakawa-Oiwakecho, Sakyo-ku, Kyoto, 606-8502, Japan, JST, PRESTO, 4-1-8 Honcho, Kawaguchi, Saitama, 332-0012, Japan;[ Yamamoto, T] Department of Applied Quantum Physics and Nuclear Engineering, Kyushu University, Motooka 744, Nishi-ku, Fukuoka, 819-0395, Japan, The Ultramicroscopy Research Center, Kyushu University, Motooka 744, Nishi-ku, Fukuoka, 819-0395, Japan;[ Toriyama, T] The Ultramicroscopy Research Center, Kyushu University, Motooka 744, Nishi-ku, Fukuoka, 819-0395, Japan;[ Matsumura, S] Department of Applied Quantum Physics and Nuclear Engineering, Kyushu University, Motooka 744, Nishi-ku, Fukuoka, 819-0395, Japan, The Ultramicroscopy Research Center, Kyushu University, Motooka 744, Nishi-ku, Fukuoka, 819-0395, Japan, INAMORI Frontier Research Center, Kyushu University, Motooka 744, Nishi-ku, Fukuoka, 819-0395, Japan;[ Nishida, Y] Department of Integrated Science and Technology, Faculty of Science and Technology, Oita University, 700 Danno-haru, Oita, 870-1192, Japan;[ Sato, K] Department of Integrated Science and Technology, Faculty of Science and Technology, Oita University, 700 Danno-haru, Oita, 870-1192, Japan, Elements Strategy Initiative for Catalysts and Batteries, Kyoto University, 1–30 Goryo-Ohara, Nishikyo-ku, Kyoto, 615-8245, Japan;[ Nagaoka, K] Department of Integrated Science and Technology, Faculty of Science and Technology, Oita University, 700 Danno-haru, Oita, 870-1192, Japan;[ Haneda, M] Advanced Ceramics Research Center, Nagoya Institute of Technology, 10-6-29 Asahigaoka, Tajimi, Gifu, 507-0071, Japan, Frontier Research Institute for Materials Science, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya, 465-8555, Japan;[ Xie, W] INAMORI Frontier Research Center, Kyushu University, Motooka 744, Nishi-ku, Fukuoka, 819-0395, Japan;[ Nanba, Y] INAMORI Frontier Research Center, Kyushu University, Motooka 744, Nishi-ku, Fukuoka, 819-0395, Japan, Global Research Center for Environment and Energy Based on Nanomaterials Science, National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044, Japan;[ Koyama, M] INAMORI Frontier Research Center, Kyushu University, Motooka 744, Nishi-ku, Fukuoka, 819-0395, Japan, Global Research Center for Environment and Energy Based on Nanomaterials Science, National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044, Japan;[ Wang, F] Division of Chemistry, Graduate School of Science, Kyoto University, Kitashirakawa-Oiwakecho, Sakyo-ku, Kyoto, 606-8502, Japan, School of Materials Science and Engineering, Shandong University, Jinan, 250061, China;[ Kawaguchi, S] Japan Synchrotron Radiation Research Institute (JASRI), SPring-8 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo, 679-5198, Japan;[ Kubota, Y] Department of Physical Science, Graduate School of Science, Osaka Prefecture University, Sakai, Osaka, 599-8531, Japan;[ Kitagawa, H] Division of Chemistry, Graduate School of Science, Kyoto University, Kitashirakawa-Oiwakecho, Sakyo-ku, Kyoto, 606-8502, Japan, INAMORI Frontier Research Center, Kyushu University, Motooka 744, Nishi-ku, Fukuoka, 819-0395, Japan, Institute for Integrated Cell-Material Sciences (iCeMS), Kyoto University, Yoshida, Sakyo-ku, Kyoto, 606-8501, Japan

来源:Angewandte Chemie - International Edition,2018

资源类型:期刊论文

5. Meshfree analysis on dynamic behavior of hard brittle material in abrasive flow machining SCOPUS

作者:Lv Z.; Hou R.; Huang C.; Zhu H.; Qi H.

作者机构:[Lv, Z] School of Mechanical Engineering, Shandong University of Technology, Zibo, 255000, China;[ Hou, R] School of Mechanical Engineering, Shandong University of Technology, Zibo, 255000, China;[ Huang, C] Center for Advanced Jet Engineering Technologies (CaJET), Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Zhu, H] Center for Advanced Jet Engineering Technologies (CaJET), Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Qi, H] Key Laboratory of Special Purpose Equipment and Advanced Processing Technology (Ministry of Education), Zhejiang University of Technology, Hangzhou, 310014, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

6. A Gradient Heterostructure Based on Tolerance Factor in High-Performance Perovskite Solar Cells with 0.84 Fill Factor SCOPUS

作者:Qiao H.W.; Yang S.; Wang Y.; Chen X.; Wen T.Y.; Tang L.J.; Cheng Q.; Hou Y.; Zhao H.; Yang H.G.

作者机构:[Qiao, H.W] Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai, 200237, China;[ Yang, S] Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, School of Materials Science and Engineering, Shandong University, Jinan, 250061, China;[ Wang, Y] Centre for Clean Environment and Energy, Gold Coast Campus, Griffith UniversityQLD 4222, Australia;[ Chen, X] Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai, 200237, China;[ Wen, T.Y] Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai, 200237, China;[ Tang, L.J] Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai, 200237, China;[ Cheng, Q] Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai, 200237, China;[ Hou, Y] Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai, 200237, China;[ Zhao, H] Centre for Clean Environment and Energy, Gold Coast Campus, Griffith UniversityQLD 4222, Australia;[ Yang, H.G] Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai, 200237, China

来源:Advanced Materials,2018

资源类型:期刊论文

7. ZnCl2-activated carbon from soybean dregs as a high efficiency adsorbent for cationic dye removal: isotherm, kinetic, and thermodynamic studies SCOPUS

作者:Li Y.; Li Y.; Zang H.; Chen L.; Meng Z.; Li H.; Ci L.; Du Q.; Wang D.; Wang C.; Li H.; Xia Y.

作者机构:[Li, Y] Laboratory of Fiber Materials and Modern Textile, The Growing Base for State Key Laboratory, Qingdao University, Qingdao, China;[ Li, Y] Laboratory of Fiber Materials and Modern Textile, The Growing Base for State Key Laboratory, Qingdao University, Qingdao, China, College of Mechanical and Electrical Engineering, Qingdao University, Qingdao, China;[ Zang, H] Laboratory of Fiber Materials and Modern Textile, The Growing Base for State Key Laboratory, Qingdao University, Qingdao, China;[ Chen, L] SDU& Rice Joint Center for Carbon Nanomaterials, Key Laboratory for Liquid–Solid Structural Evolution & Processing of Materials (Ministry of Education), School of Materials Science and Engineering, Shandong University, Jinan, China;[ Meng, Z] Laboratory of Fiber Materials and Modern Textile, The Growing Base for State Key Laboratory, Qingdao University, Qingdao, China;[ Li, H] Laboratory of Fiber Materials and Modern Textile, The Growing Base for State Key Laboratory, Qingdao University, Qingdao, China;[ Ci, L] SDU& Rice Joint Center for Carbon Nanomaterials, Key Laboratory for Liquid–Solid Structural Evolution & Processing of Materials (Ministry of Education), School of Materials Science and Engineering, Shandong University, Jinan, China;[ Du, Q] Laboratory of Fiber Materials and Modern Textile, The Growing Base for State Key Laboratory, Qingdao University, Qingdao, China;[ Wang, D] College of Mechanical and Electrical Engineering, Qingdao University, Qingdao, China;[ Wang, C] College of Mechanical and Electrical Engineering, Qingdao University, Qingdao, China;[ Li, H] College of Mechanical and Electrical Engineering, Qingdao University, Qingdao, China;[ Xia, Y] Laboratory of Fiber Materials and Modern Textile, The Growing Base for State Key Laboratory, Qingdao University, Qingdao, China

来源:Environmental Technology (United Kingdom),2018

资源类型:期刊论文

8. Hydrolysis kinetics of silane coupling agents studied by near-infrared spectroscopy plus partial least squares model SCOPUS

作者:Zhai Q.; Lu Z.; Wang J.; Wang W.; Ma Y.; Yue C.; Zhao Y.

作者机构:[Zhai, Q] Department of Physics and Information Engineering, Jining University, Jining, China;[ Lu, Z] Department of Physics and Information Engineering, Jining University, Jining, China;[ Wang, J] Department of Physics and Information Engineering, Jining University, Jining, China;[ Wang, W] Department of Physics and Information Engineering, Jining University, Jining, China;[ Ma, Y] Department of Physics and Information Engineering, Jining University, Jining, China;[ Yue, C] School of Materials Science and Engineering, Shandong University, Jinan, China;[ Zhao, Y] School of Materials Science and Engineering, Shandong University, Jinan, China

来源:Phosphorus, Sulfur and Silicon and the Related Elements,2018

资源类型:期刊论文

9. Surface-enhanced infrared attenuated total reflection spectroscopy via carbon nanodots for small molecules in aqueous solution SCOPUS

作者:Hu Y.; Chen Q.; Ci L.; Cao K.; Mizaikoff B.

作者机构:[Hu, Y] Institute of Analytical and Bioanalytical Chemistry, Ulm University, Ulm, 89081, Germany;[ Chen, Q] Key Laboratory for Liquid−Solid Structural Evolution and Processing of Materials (Ministry of Education), School of Materials Science and Engineering, Shandong University, Jinan, 250061, China;[ Ci, L] Key Laboratory for Liquid−Solid Structural Evolution and Processing of Materials (Ministry of Education), School of Materials Science and Engineering, Shandong University, Jinan, 250061, China;[ Cao, K] Electron Microscopy of Materials Science, Central Facility for Electron Microscopy, Ulm University, Ulm, 89081, Germany;[ Mizaikoff, B] Institute of Analytical and Bioanalytical Chemistry, Ulm University, Ulm, 89081, Germany

来源:Analytical and Bioanalytical Chemistry,2018

资源类型:期刊论文

10. Stability of turning process with a distributed cutting force model SCOPUS

作者:Wu Y.; Song Q.; Liu Z.; Wang B.

作者机构:[Wu, Y] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China;[ Song, Q] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Liu, Z] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Wang, B] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

11. EBSD study of strain dependent microstructure evolution during hot deformation of a typical nickel-based superalloy SCOPUS

作者:Zhang H.; Qin S.; Li H.; Liu J.; Lv Y.; Wang Y.; Zhang P.; Zhou H.; Wu T.

作者机构:[Zhang, H] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, 266590, China;[ Qin, S] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, 266590, China, Qingdao Yutong Pipe Industry Co., Ltd., Qingdao RTP Engineering Technology Center, Qingdao, 266590, China;[ Li, H] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, 266590, China;[ Liu, J] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, 266590, China;[ Lv, Y] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, 266590, China;[ Wang, Y] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, 266590, China;[ Zhang, P] Fushun Special Steel Co., Ltd., Tech Center, Fushun, 113000, China;[ Zhou, H] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, 266590, China;[ Wu, T] Engineering Training Center, Shandong University, Jinan, 250002, China

来源:Journal of Materials Research,2018

资源类型:期刊论文

12. A helical interpolation precision truing and error compensation for arc-shaped diamond grinding wheel SCOPUS

作者:Zhu J.; Yao P.; Wang W.; Huang C.; Zhu H.; Zou B.; Liu H.

作者机构:[Zhu, J] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, Shandong 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, PR China, Jinan, Shandong 250061, China;[ Yao, P] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, Shandong 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, PR China, Jinan, Shandong 250061, China;[ Wang, W] College of Mechanical and Electronic Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China;[ Huang, C] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, Shandong 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, PR China, Jinan, Shandong 250061, China;[ Zhu, H] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, Shandong 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, PR China, Jinan, Shandong 250061, China;[ Zou, B] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, Shandong 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, PR China, Jinan, Shandong 250061, China;[ Liu, H] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, Shandong 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, PR China, Jinan, Shandong 250061, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

13. Multiregional viscoelastic characterization of the corona radiata in the sagittal plane of the porcine brain SCOPUS

作者:Pan C.; Chen F.; Zhou J.; Li X.; Zhao F.; Zhang X.

作者机构:[Pan, C] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Chen, F] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Zhou, J] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Li, X] Department of Neurosurgery, Qilu Hospital of Shandong University and Brain Science Research Institute, Shandong University, Jinan, 250012, China;[ Zhao, F] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Zhang, X] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China

来源:Medical and Biological Engineering and Computing,2018

资源类型:期刊论文

14. A study on corrosion behaviors of laser cladded Fe−Cr−Ni coating in as-cladded and machined conditions SCOPUS

作者:Zhang P.; Liu Z.; Su G.; Du J.; Zhang J.

作者机构:[Zhang, P] School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, 250353, China, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Liu, Z] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan, 250061, China;[ Su, G] School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, 250353, China;[ Du, J] School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, 250353, China;[ Zhang, J] School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, 250353, China

来源:Materials and Corrosion,2018

资源类型:期刊论文

15. High-speed vibration-assisted electro-arc machining SCOPUS

作者:Zhu G.; Zhang M.; Zhang Q.; Wang K.

作者机构:[Zhu, G] Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, No. 17923, Jingshi Road, Jinan City, 250061, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Zhang, M] School of Mechanical Engineering, Nanjing Institute of Technology, Nanjing, China;[ Zhang, Q] Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, No. 17923, Jingshi Road, Jinan City, 250061, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Wang, K] Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, No. 17923, Jingshi Road, Jinan City, 250061, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

16. Graph-Based Change Detection for Condition Monitoring of Rotating Machines: Techniques for Graph Similarity SCOPUS

作者:Wang T.; Lu G.; Liu J.; Yan P.

作者机构:[Wang, T] Key Laboratory of High-Efficiency and Clean Mechanical Manufacture of MOE, National Demonstration Center for Experimental Mechanical Engineering Education, School of Mechanical Engineering, Shandong University, Jinan 250061, China (e-mail: wangtengsdu@gmail.com)., China;[ Lu, G] Key Laboratory of High-Efficiency and Clean Mechanical Manufacture of MOE, National Demonstration Center for Experimental Mechanical Engineering Education, School of Mechanical Engineering, Shandong University, Jinan 250061, China (e-mail: luguoliang@sdu.edu.cn)., China;[ Liu, J] Department of Mechanical and Aerospace Engineering, Carleton University, Ottawa, ON K1S 5B6, Canada (e-mail: Jie.Liu@carleton.ca)., Canada;[ Yan, P] Key Laboratory of High-Efficiency and Clean Mechanical Manufacture of MOE, National Demonstration Center for Experimental Mechanical Engineering Education, School of Mechanical Engineering, Shandong University, Jinan 250061, China (e-mail: yanpeng@sdu.edu.cn)., China

来源:IEEE Transactions on Reliability,2018

资源类型:期刊论文

17. Recognizing Human Actions in Low-Resolution Videos: An Approach Based on the Dempster-Shafer Theory SCOPUS

作者:Gao Z.; Lu G.; Yan P.

作者机构:[Gao, Z] Key Laboratory of High-efficiency and Clean Mechanical Manufacture of MOE, National Demonstration Center for Experimental Mechanical Engineering Education, School of Mechanical Engineering, Shandong University, Jinan, China, State Key Laboratory of Digital Multimedia Technology, Hisense Company Limited, Qingdao, China;[ Lu, G] Key Laboratory of High-efficiency and Clean Mechanical Manufacture of MOE, National Demonstration Center for Experimental Mechanical Engineering Education, School of Mechanical Engineering, Shandong University, Jinan, China;[ Yan, P] Key Laboratory of High-efficiency and Clean Mechanical Manufacture of MOE, National Demonstration Center for Experimental Mechanical Engineering Education, School of Mechanical Engineering, Shandong University, Jinan, China

来源:International Journal of Pattern Recognition and Artificial Intelligence,2018

资源类型:期刊论文

18. Characteristics of machined surface integrity in face milling Al-Li alloy 2A97 with carbide inserts SCOPUS

作者:Niu J.; Liu Z.; Ai X.; Huang W.; Wang G.; Duan R.

作者机构:[Niu, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;[ Liu, Z] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;[ Ai, X] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;[ Huang, W] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;[ Wang, G] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;[ Duan, R] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

19. Modeling and analysis of force prediction in milling process of unidirectional fiber reinforced polymer composites SCOPUS

作者:Wang H.; Dong H.; Ke Y.; Sun J.

作者机构:[Wang, H] The State Key Lab of Fluid Power Transmission and Control, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310027, China;[ Dong, H] The State Key Lab of Fluid Power Transmission and Control, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310027, China;[ Ke, Y] The State Key Lab of Fluid Power Transmission and Control, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310027, China;[ Sun, J] School of Mechanical Engineering, Shandong University, Ji’nan, 250061, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

20. Machined channel quality and tool life using cermet micro-mill in micro-milling aluminum alloy SCOPUS

作者:Li S.S.; Zou B.; Xu K.; YishunWang

作者机构:[Li, S.S] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, 17923 Jing Shi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Shandong, China, Shandong Special Equipment Inspection Institute Co., Ltd., Shandong, China;[ Zou, B] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, 17923 Jing Shi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Shandong, China;[ Xu, K] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, 17923 Jing Shi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Shandong, China;[ YishunWang] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, 17923 Jing Shi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Shandong, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

共 3 页, 42 条记录

TOP