按条件检索“123”条记录

已选条件: 数据来源: SCOPUS × 出版年: 2019 × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
1. Surface quality evaluation of single crystal 4H-SiC wafer machined by hybrid laser-waterjet: Comparing with laser machining EI SCOPUS SCIE

作者:Feng, Shaochuan; Huang, Chuanzhen; Wang, Jun; Jia, Zhixin

作者机构:[Feng, Shaochuan; Jia, Zhixin] Univ Sci & Technol Beijing, Sch Mech Engn, Beijing 100083, Peoples R China.; [Huang, Chuanzhen] Shandong Univ, Sch Mech Engn, Minist Educ, Ctr Adv Jet Engn Technol CaJET,Key Lab High Effic, Jinan 250061, Shandong, Peoples R China.; [Wang, Jun] UNSW, Sch Mech & Mfg Engn, Sydney, NSW 2052, Australia.

来源:MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING,2019,Vol.93,238-251

资源类型:期刊论文

WOS:000457727300029

2. A dynamic parameter identification method of industrial robots considering joint elasticity EI SCOPUS SCIE

作者:Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao

作者机构:[Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS,2019,Vol.16,Issue.1

资源类型:期刊论文

WOS:000458755700001

3. Investigation on the milling performance of amputating clamping supports for machining with industrial robot EI SCOPUS SCIE

作者:Zhang, Yiran; Guo, Kai; Sun, Jie

作者机构:[Zhang, Yiran; Guo, Kai; Sun, Jie] Shandong Univ, Res Ctr Aeronaut Component Mfg Technol & Equipmen, Jinan 250061, Shandong, Peoples R China.; [Zhang, Yiran; Guo, Kai; Sun, Jie] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech, Minist Educ, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.102,Issue.9-12,3573-3586

资源类型:期刊论文

WOS:000469060700060

4. A comparison of TIG-MIG hybrid welding with conventional MIG welding in the behaviors of arc, droplet and weld pool EI SCOPUS SCIE

作者:Zong, Ran; Chen, Ji; Wu, Chuansong

作者机构:[Zong, Ran] Shandong Univ Technol, Sch Mech Engn, 266 Xincun Rd, Zibo 255000, Peoples R China.; [Chen, Ji; Wu, Chuansong] Shandong Univ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Shandong, Peoples R China.

来源:JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2019,Vol.270,345-355

资源类型:期刊论文

WOS:000468712800031

5. Inter-sample output predictor based sampled-data ADRC supporting high precision control of VCM servo systems EI SCOPUS SCIE

作者:Tian, Chuan; Yan, Peng; Zhang, Zhen

作者机构:[Tian, Chuan; Yan, Peng] Beihang Univ, Sch Automat Sci & Elect Engn, Xueyuan Rd 37, Beijing 100191, Peoples R China.; [Yan, Peng] Shandong Univ, Minist Educ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg, 17923 Jingshi Rd, Jinan 250061, Shandong, Peoples R China.; [Zhang, Zhen] Tsinghua Univ, Dept Mech Engn, Beijing 100084, Peoples R China.

来源:CONTROL ENGINEERING PRACTICE,2019,Vol.85,138-148

资源类型:期刊论文

WOS:000463312400014

6. Ontology-Based Noise Source Identification and Key Feature Selection: A Case Study on Tractor Cab EI SCOPUS SCIE

作者:Han, Su; Zhou, Yiqi; Chen, Yanzhao; Wei, Chenglong; Li, Rui; Zhu, Bo

作者机构:[Han, Su; Zhou, Yiqi; Wei, Chenglong; Li, Rui] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Han, Su; Zhou, Yiqi; Wei, Chenglong; Li, Rui] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Chen, Yanzhao] Qilu Univ Technol, Sch Mech & Automot Engn, Shandong Acad Sci, Jinan, Shandong, Peoples R China.; [Zhu, Bo] Shandong Univ, Sch Mat Sci & Engn, Jinan 250000, Shandong, Peoples R China.

来源:SHOCK AND VIBRATION,2019,Vol.2019

资源类型:期刊论文

WOS:000459099400001

7. Free vibration analysis of bilayered circular micro-plate including surface effects EI SCOPUS SCIE

作者:Zhou, Shasha; Zhang, Rongmin; Zhou, Shenjie; Li, Anqing

作者机构:[Zhou, Shasha; Zhang, Rongmin; Li, Anqing] Qilu Univ Technol, Shandong Acad Sci, Sch Mech & Automot Engn, Daxue Rd 3501, Jinan 250353, Shandong, Peoples R China.; [Zhou, Shenjie] Shandong Univ, Sch Mech Engn, Jingshi Rd 17923, Jinan 250061, Shandong, Peoples R China.

来源:APPLIED MATHEMATICAL MODELLING,2019,Vol.70,54-66

资源类型:期刊论文

WOS:000468714000004

8. Nucleation location and propagation direction of radial and median cracks for brittle material in scratching EI SCOPUS SCIE

作者:Li, Xinying; Gao, Yufei; Ge, Peiqi; Zhang, Lei; Bi, Wenbo; Meng, Jianfeng

作者机构:[Li, Xinying; Gao, Yufei; Ge, Peiqi; Zhang, Lei; Bi, Wenbo; Meng, Jianfeng] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Gao, Yufei; Ge, Peiqi; Zhang, Lei] Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Beijing, Peoples R China.

来源:CERAMICS INTERNATIONAL,2019,Vol.45,Issue.6,7524-7536

资源类型:期刊论文

WOS:000460492200118

9. Simulation and optimization of overlapped iteration process with multi-coupled activities based on value analysis EI SCOPUS SCIE

作者:Yin, Fupeng; Gao, Qi; Ji, Xue

作者机构:[Yin, Fupeng; Gao, Qi; Ji, Xue] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Yin, Fupeng; Ji, Xue] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.

来源:CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS,2019,Vol.27,Issue.1,57-67

资源类型:期刊论文

WOS:000461561100005

10. A high order scheme for unsteady heat conduction equations EI SCOPUS SCIE

作者:Xu, Mingtian

作者机构:[Xu, Mingtian] Shandong Univ, Sch Civil Engn, Dept Engn Mech, Jinan 250061, Shandong, Peoples R China.

来源:APPLIED MATHEMATICS AND COMPUTATION,2019,Vol.348,565-574

资源类型:期刊论文

WOS:000456796600039

11. Material Ductile Failure-Based Finite Element Simulations of Chip Serration in Orthogonal Cutting of Titanium Alloy Ti-6Al-4V EI SCOPUS SCIE

作者:Liu, Guoliang; Shah, Suril; Ozel, Tugrul

作者机构:[Liu, Guoliang; Shah, Suril; Ozel, Tugrul] Rutgers State Univ, Mfg & Automat Res Lab, Dept Ind & Syst Engn, Piscataway, NJ 08854 USA.; [Liu, Guoliang] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2019,Vol.141,Issue.4

资源类型:期刊论文

WOS:000460839400018

12. Visualization analysis of the working process and dynamic characteristics comparison of a hydraulically damped rubber mount with resonant column channel EI SCOPUS SCIE

作者:He, Xin; Wang, Yanan; Lian, Chen; Li, Qingfeng

作者机构:[He, Xin; Wang, Yanan; Lian, Chen; Li, Qingfeng] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [He, Xin; Wang, Yanan; Lian, Chen; Li, Qingfeng] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [He, Xin; Wang, Yanan; Lian, Chen; Li, Qingfeng] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.

来源:JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING,2019,Vol.41,Issue.2

资源类型:期刊论文

WOS:000457211000001

13. The size-dependent static bending of a partially covered laminated microbeam EI SCOPUS SCIE

作者:Fu, Guangyang; Zhou, Shenjie; Qi, Lu

作者机构:[Fu, Guangyang; Zhou, Shenjie; Qi, Lu] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Fu, Guangyang; Zhou, Shenjie; Qi, Lu] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2019,Vol.152,411-419

资源类型:期刊论文

WOS:000459837400030

14. Optimum selection of tool materials for machining of high-strength steels based on fuzzy comprehensive evaluation method EI SCOPUS SCIE

作者:Xu, Qingzhong; Zhao, Jun; Ai, Xing; Huang, Weimin; Wang, Guijie

作者机构:[Xu, Qingzhong; Zhao, Jun; Ai, Xing; Huang, Weimin; Wang, Guijie] Shandong Univ, Sch Mech Engn, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2019,Vol.233,Issue.1,145-153

资源类型:期刊论文

WOS:000454115700013

15. A generalized cutting force model for five-axis milling processes EI SCOPUS SCIE

作者:Song, Qinghua; Liu, Zhanqiang; Ju, Ganggang; Wan, Yi

作者机构:[Song, Qinghua; Liu, Zhanqiang; Ju, Ganggang; Wan, Yi] Shandong Univ, Sch Mech Engn, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, 17923 Jingshi Rd, Jinan 250061, Shandong, Peoples R China.

来源:PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2019,Vol.233,Issue.1,3-17

资源类型:期刊论文

WOS:000454115700001

16. Structural Integrity Analysis of Two Over-Temperature Methanation Furnaces EI SCOPUS

作者:Zhang, Ming ;Wang, Weiqiang ;Wang, Pengfei

作者机构:[Zhang, M] School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), 3501 Daxue Road, Jinan, 250353, China;[ Wang, W] School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan, 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, 17923 Jingshi Road, Jinan, 250061, China;[ Wang, P] School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan, 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, 17923 Jingshi Road, Jinan, 250061, China

来源:Journal of Failure Analysis and Prevention,2019,Vol.19,Issue.1,230-236

资源类型:期刊论文

17. A review on research progress of machining technologies of carbon fiber-reinforced polymer and aramid fiber-reinforced polymer EI SCOPUS SCIE

作者:Shi, Z. Y.; Cui, P.; Li, X.

作者机构:[Shi, Z. Y.; Cui, P.; Li, X.] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Shi, Z. Y.; Cui, P.; Li, X.] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ, Jinan, Shandong, Peoples R China.

来源:PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2019,Vol.233,Issue.13,4508-4520

资源类型:期刊论文

WOS:000471346700007

18. Research on the automotive sensor-aided low-cost inertial navigation system for land vehicles SCOPUS SCIE

作者:Fang, Susu; Wang, Zengcai; Zhao, Lei

作者机构:[Fang, Susu; Wang, Zengcai; Zhao, Lei] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg, Minist Educ, 17923 Jingshi Rd, Jinan 250061, Shandong, Peoples R China.

来源:ADVANCES IN MECHANICAL ENGINEERING,2019,Vol.11,Issue.1

资源类型:期刊论文

WOS:000460992500001

19. A detection algorithm of spatter on welding plate surface based on machine vision EI SCOPUS

作者:Xia, Xin-miao ;Jiang, Zhao-liang ;Xu, Peng-fei

作者机构:[Xia, X.-M] School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Jiang, Z.-L] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Machine Manufacturing, Ministry of Education, Shandong University, Jinan, 250061, China;[ Xu, P.-F] School of Mechanical Engineering, Shandong University, Jinan, 250061, China

来源:Optoelectronics Letters,2019,Vol.15,Issue.1,52-56

资源类型:期刊论文

20. Influence of cutting parameters on surface roughness and strain hardening during milling NiTi shape memory alloy EI SCOPUS SCIE

作者:Wang, Guijie; Liu, Zhanqiang; Huang, Weimin; Wang, Bing; Niu, Jintao

作者机构:[Wang, Guijie; Liu, Zhanqiang; Huang, Weimin; Wang, Bing; Niu, Jintao] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Wang, Guijie; Liu, Zhanqiang; Huang, Weimin; Wang, Bing; Niu, Jintao] MOE, Key Natl Demonstrat Ctr Expt Mech Engn Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.102,Issue.5-8,2211-2221

资源类型:期刊论文

WOS:000469002200083

共 7 页, 123 条记录

TOP