按条件检索“32”条记录

已选条件: 数据来源: SCOPUS × 机构: 机械工程学院 × 机构: 土建与水利学院 × 文献类型: articleinpress ×
导出
  • 排序
  • 显示
1. Effect of axial compression ratio on concrete-filled steel tube composite shear wall SCOPUS

作者:Hou H.; Fu W.; Qiu C.; Cheng J.; Qu Z.; Zhu W.; Ma T.

作者机构:[Hou, H] School of Civil Engineering, Shandong University, Jinan, China, Institute of Engineering Mechanics, China Earthquake Administration, Sanhe, China;[ Fu, W] School of Civil Engineering, Shandong University, Jinan, China;[ Qiu, C] School of Civil Engineering, Shandong University, Jinan, China;[ Cheng, J] School of Civil Engineering, Shandong University, Jinan, China;[ Qu, Z] Institute of Engineering Mechanics, China Earthquake Administration, Sanhe, China;[ Zhu, W] School of Civil Engineering, Shandong University, Jinan, China;[ Ma, T] School of Civil Engineering, Shandong University, Jinan, China

来源:Advances in Structural Engineering,2018

资源类型:期刊论文

2. Analysis on Construction Mechanical Mechanism of Highway Tunnels with Large Span and Small Spacing SCOPUS

作者:Cui S.; Wu K.; Zhang Q.; Yu Y.; Wang Y.

作者机构:[Cui, S] School of Civil Engineering, Shandong University, Jinan, China;[ Wu, K] School of Civil Engineering, Shandong University, Jinan, China;[ Zhang, Q] School of Civil Engineering, Shandong University, Jinan, China;[ Yu, Y] School of Civil Engineering, Shandong University, Jinan, China;[ Wang, Y] Geo and Structural Engineering Research Center, Shandong University, Jinan, China

来源:Geotechnical and Geological Engineering,2018

资源类型:期刊论文

3. Effect of hysteresis properties of shape memory alloy-tuned mass damper on seismic control of power transmission tower SCOPUS

作者:Tian L.; Gao G.; Qiu C.; Rong K.

作者机构:[Tian, L] School of Civil Engineering, Shandong University, Jinan, China;[ Gao, G] School of Civil Engineering, Shandong University, Jinan, China;[ Qiu, C] School of Civil Engineering, Shandong University, Jinan, China;[ Rong, K] School of Civil Engineering, Shandong University, Jinan, China

来源:Advances in Structural Engineering,2018

资源类型:期刊论文

4. Effect of machining-induced surface integrity on the corrosion behavior of Al–Li alloy 2A97 in sodium chloride solution SCOPUS

作者:Niu J.; Liu Z.; Wang B.; Hua Y.; Wang G.

作者机构:[Niu, J] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan, 250061, China;[ Liu, Z] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan, 250061, China;[ Wang, B] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan, 250061, China;[ Hua, Y] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan, 250061, China;[ Wang, G] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan, 250061, China

来源:Materials and Corrosion,2018

资源类型:期刊论文

5. Construction Mechanical Mechanism of Shallow Subway Tunnel Group with Large-Span Variable Cross Section EI SCOPUS

作者:Wu, Ke ;Yu, Yalin ;Cui, Shuaishuai ;Zhang, Qianjin

作者机构:[Wu, Ke ;Yu, Yalin ;Cui, Shuaishuai ;Zhang, Qianjin ] School of Civil Engineering, Shandong University, Jinan; 250061, China

来源:Geotechnical and Geological Engineering,20183879-3891

资源类型:期刊论文

6. Characterizing the effect of process variables on energy consumption in end milling SCOPUS

作者:Zhou L.; Li F.; Zhao F.; Li J.; Sutherland J.W.

作者机构:[Zhou, L] Key Laboratory of High Efficiency and Clean Mechanical Manufacture Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Li, F] Key Laboratory of High Efficiency and Clean Mechanical Manufacture Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Zhao, F] Environmental and Ecological Engineering, Purdue University, West Lafayette, IN 47907, United States;[ Li, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Sutherland, J.W] Environmental and Ecological Engineering, Purdue University, West Lafayette, IN 47907, United States

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

7. Research on cavitation involved in ultrasonic-assisted abrasive waterjet machining SCOPUS

作者:Lv Z.; Hou R.; Wang T.; Huang C.; Zhu H.

作者机构:[Lv, Z] School of Mechanical Engineering, Shandong University of Technology, Zibo, 255000, China;[ Hou, R] School of Mechanical Engineering, Shandong University of Technology, Zibo, 255000, China;[ Wang, T] School of Mechanical Engineering, Shandong University of Technology, Zibo, 255000, China;[ Huang, C] Center for Advanced Jet Engineering Technologies (CaJET), Key Laboratory of High-Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Zhu, H] Center for Advanced Jet Engineering Technologies (CaJET), Key Laboratory of High-Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan, 250061, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

8. Mechanical Effect Analysis and Comparative Site Tests on Surrounding Rock with Different Bolt Anchoring Lengths and Pre-tightening Forces SCOPUS

作者:Wang Q.; Wang H.; Pan R.; Li S.; He M.; Jiang B.; Qin Q.; Zhang C.; Xu Y.

作者机构:[Wang, Q] Research Center of Geotechnical and Structural Engineering, Shandong University, Jinan, 250061, China, Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology (Beijing), Beijing, 100083, China;[ Wang, H] Research Center of Geotechnical and Structural Engineering, Shandong University, Jinan, 250061, China, School of Civil Engineering, Shandong Jianzhu University, Jinan, 250101, China;[ Pan, R] Research Center of Geotechnical and Structural Engineering, Shandong University, Jinan, 250061, China;[ Li, S] Research Center of Geotechnical and Structural Engineering, Shandong University, Jinan, 250061, China;[ He, M] Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology (Beijing), Beijing, 100083, China;[ Jiang, B] Research Center of Geotechnical and Structural Engineering, Shandong University, Jinan, 250061, China, School of Civil Engineering and Architecture, University of Jinan, Jinan, 250022, China;[ Qin, Q] Research Center of Geotechnical and Structural Engineering, Shandong University, Jinan, 250061, China;[ Zhang, C] Research Center of Geotechnical and Structural Engineering, Shandong University, Jinan, 250061, China;[ Xu, Y] Research Center of Geotechnical and Structural Engineering, Shandong University, Jinan, 250061, China

来源:Geotechnical and Geological Engineering,2018

资源类型:期刊论文

9. Bacterial foraging optimization based on improved chemotaxis process and novel swarming strategy SCOPUS

作者:Pang B.; Song Y.; Zhang C.; Wang H.; Yang R.

作者机构:[Pang, B] School of Control Science and Engineering, Shandong University, Jinan, 250061, China;[ Song, Y] School of Mechanical, Electrical and Information Engineering, Shandong University at Weihai, Weihai, 264209, China;[ Zhang, C] School of Mechanical, Electrical and Information Engineering, Shandong University at Weihai, Weihai, 264209, China;[ Wang, H] School of Control Science and Engineering, Shandong University, Jinan, 250061, China;[ Yang, R] School of Mechanical, Electrical and Information Engineering, Shandong University at Weihai, Weihai, 264209, China

来源:Applied Intelligence,2018

资源类型:期刊论文

10. A numerical analysis and experimental investigation of three oil grooves sleeve bearing performance SCOPUS

作者:Wang L.; Zeng Q.; Lu C.; Liang P.

作者机构:[Wang, L] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, China;[ Zeng, Q] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, China;[ Lu, C] Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Jinan, China;[ Liang, P] School of Mechanical Engineering, Qingdao Technological University, Qingdao, China

来源:Industrial Lubrication and Tribology,2018

资源类型:期刊论文

11. Composite Learning Robot Control with Friction Compensation: A Neural Network-Based Approach SCOPUS

作者:Guo K.; Pan Y.; Yu H.

作者机构:[Guo, K] Mechanical Engineering, Shandong University, 12589 Jinan, Shandong China 250061 (e-mail: kaiguo@sdu.edu.cn);[ Pan, Y] Department of Biomedical Engineering, National Universisy of Singapore, Singapore Singapore 117575 (e-mail: yongppan@gmail.com);[ Yu, H] Biomedical Engineering, National University of Singapore, Singapore (e-mail: bieyhy@nus.edu.sg)

来源:IEEE Transactions on Industrial Electronics,2018

资源类型:期刊论文

12. Size-dependent responses of micro-end mill based on strain gradient elasticity theory SCOPUS

作者:Du Y.; Song Q.; Liu Z.; Wang B.; Wan Y.

作者机构:[Du, Y] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China;[ Song, Q] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Liu, Z] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Wang, B] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China;[ Wan, Y] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

13. A simulation model for predicting surface integrity coupled thermal–mechanical effect in turning of Inconel 718 super alloy SCOPUS

作者:Ren X.; Liu Z.

作者机构:[Ren, X] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, China;[ Liu, Z] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

14. Multiregional viscoelastic characterization of the corona radiata in the sagittal plane of the porcine brain SCOPUS

作者:Pan C.; Chen F.; Zhou J.; Li X.; Zhao F.; Zhang X.

作者机构:[Pan, C] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Chen, F] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Zhou, J] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Li, X] Department of Neurosurgery, Qilu Hospital of Shandong University and Brain Science Research Institute, Shandong University, Jinan, 250012, China;[ Zhao, F] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Zhang, X] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China

来源:Medical and Biological Engineering and Computing,2018

资源类型:期刊论文

15. Characteristics of machined surface integrity in face milling Al-Li alloy 2A97 with carbide inserts SCOPUS

作者:Niu J.; Liu Z.; Ai X.; Huang W.; Wang G.; Duan R.

作者机构:[Niu, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;[ Liu, Z] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;[ Ai, X] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;[ Huang, W] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;[ Wang, G] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;[ Duan, R] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

16. High-speed vibration-assisted electro-arc machining SCOPUS

作者:Zhu G.; Zhang M.; Zhang Q.; Wang K.

作者机构:[Zhu, G] Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, No. 17923, Jingshi Road, Jinan City, 250061, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Zhang, M] School of Mechanical Engineering, Nanjing Institute of Technology, Nanjing, China;[ Zhang, Q] Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, No. 17923, Jingshi Road, Jinan City, 250061, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Wang, K] Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, No. 17923, Jingshi Road, Jinan City, 250061, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

17. A helical interpolation precision truing and error compensation for arc-shaped diamond grinding wheel SCOPUS

作者:Zhu J.; Yao P.; Wang W.; Huang C.; Zhu H.; Zou B.; Liu H.

作者机构:[Zhu, J] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, Shandong 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, PR China, Jinan, Shandong 250061, China;[ Yao, P] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, Shandong 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, PR China, Jinan, Shandong 250061, China;[ Wang, W] College of Mechanical and Electronic Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China;[ Huang, C] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, Shandong 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, PR China, Jinan, Shandong 250061, China;[ Zhu, H] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, Shandong 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, PR China, Jinan, Shandong 250061, China;[ Zou, B] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, Shandong 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, PR China, Jinan, Shandong 250061, China;[ Liu, H] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, Shandong 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, PR China, Jinan, Shandong 250061, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

18. A study on corrosion behaviors of laser cladded Fe−Cr−Ni coating in as-cladded and machined conditions SCOPUS

作者:Zhang P.; Liu Z.; Su G.; Du J.; Zhang J.

作者机构:[Zhang, P] School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, 250353, China, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Liu, Z] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan, 250061, China;[ Su, G] School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, 250353, China;[ Du, J] School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, 250353, China;[ Zhang, J] School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, 250353, China

来源:Materials and Corrosion,2018

资源类型:期刊论文

19. Modeling and analysis of force prediction in milling process of unidirectional fiber reinforced polymer composites SCOPUS

作者:Wang H.; Dong H.; Ke Y.; Sun J.

作者机构:[Wang, H] The State Key Lab of Fluid Power Transmission and Control, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310027, China;[ Dong, H] The State Key Lab of Fluid Power Transmission and Control, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310027, China;[ Ke, Y] The State Key Lab of Fluid Power Transmission and Control, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310027, China;[ Sun, J] School of Mechanical Engineering, Shandong University, Ji’nan, 250061, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

20. Machined channel quality and tool life using cermet micro-mill in micro-milling aluminum alloy SCOPUS

作者:Li S.S.; Zou B.; Xu K.; YishunWang

作者机构:[Li, S.S] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, 17923 Jing Shi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Shandong, China, Shandong Special Equipment Inspection Institute Co., Ltd., Shandong, China;[ Zou, B] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, 17923 Jing Shi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Shandong, China;[ Xu, K] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, 17923 Jing Shi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Shandong, China;[ YishunWang] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, 17923 Jing Shi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Shandong, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

共 2 页, 32 条记录

TOP