按条件检索“583”条记录

已选条件: 数据来源: SCOPUS × 数据来源: 万方 × 出版年: 2012 × 机构: 机械工程学院 × 机构: 土建与水利学院 ×
导出
  • 排序
  • 显示
21. A study on in situ growth of TaC whiskers in A1_2O_3 matrix powder for ceramic cutting tools EI SCOPUS SCIE

作者:Guolong Zhao;Chuanzhen Huang;Hanlian Liu;Liang Xu;Xuewen Chong;Bin Zou;Hongtao Zhu

作者机构:[Zhao, G] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China;[ Huang, C] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China;[ Liu, H] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China;[ Xu, L] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China;[ Chong, X] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China;[ Zou, B] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China;[ Zhu, H] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China

来源:Materials Research Bulletin: An International Journal Reporting Research on Crystal Growth and Materials Preparation and Characterization,MATERIALS RESEARCH BULLETIN,2012,Vol.47,Issue.8,2027-2031

WOS被引数:8

资源类型:期刊论文

WOS:000305779900033

22. Toughening Mechanisms and Wear Behavior of a TiC Whisker Toughening Alumina Ceramic Cutting Tool Composite CPCI-S EI SCOPUS

作者:Liu, Bingqiang; Huang, Chuanzhen; Sun, Ailing

作者机构:[Liu, Bingqiang; Sun, Ailing] Weifang Univ, CaCCTAT, Weifang 261061, Peoples R China.; [Liu, Bingqiang; Huang, Chuanzhen] Shandong Univ, CaJET, Sch Mech Engn, Jinan 250061, Peoples R China.

会议名称:10th Asia-Pacific Conference on Materials Processing (APCMP 2012)

会议日期:JUN 14-17, 2012

来源:ADVANCES IN MATERIALS PROCESSING X,2012,Vol.500,634-639

WOS被引数:3

资源类型:会议论文;期刊论文

WOS:000309638500103

23. Planning and Simulation Study of Stone Countertop Automatic Production Line CPCI-S EI SCOPUS

作者:Kong, Yanjie; Zhang, Jinsheng; Huang, Bo; Wang, Zhi

作者机构:[Kong, Yanjie; Zhang, Jinsheng; Huang, Bo; Wang, Zhi] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

会议名称:10th Asia-Pacific Conference on Materials Processing (APCMP 2012)

会议日期:JUN 14-17, 2012

来源:ADVANCES IN MATERIALS PROCESSING X,2012,Vol.500,423-428

资源类型:会议论文;期刊论文

WOS:000309638500068

24. Influence of drawing temperature and die clearance on wall thickness of AZ31B deep drawn part EI SCOPUS

作者:Lin, Shuxia ;Zhang, Chenglin ;Gao, Jun ;Ruan, Liqun

作者机构:[Lin, Shuxia ;Zhang, Chenglin ;Gao, Jun ] School of Mechanical, Electrical and Information Engineering, Shandong University at Weihai, Weihai 264209, China;[Ruan, Liqun ] Dept. Mechanical Eng. and Materials Sci., Kumamoto University, Kumamoto, 8608555, Japan

会议名称:4th International Conference on Mechanical and Electrical Technology, ICMET 2012

会议日期:24 July 2012 through 26 July 2012

来源:Applied Mechanics and Materials,2012,Vol.229-231,2415-2418

资源类型:会议论文;期刊论文

25. Research on Calibration Method of Tire Dynamic Balance Detection System CPCI-S EI SCOPUS

作者:Yang, Jingfang; Feng, Xianying; Fu, Hongjun; Zhao, Lianfang

作者机构:[Yang, Jingfang; Feng, Xianying; Fu, Hongjun] Shandong Univ, Sch Mech & Elect Engn, Jinan 250031, Shandong, Peoples R China.

会议名称:2nd International Conference on Advanced Engineering Materials and Technology (AEMT)

会议日期:JUL 06-08, 2012

来源:AUTOMATIC MANUFACTURING SYSTEMS II, PTS 1 AND 2,2012,Vol.542-543,828-832

资源类型:会议论文;期刊论文

WOS:000317555500166

26. Optimization Design on the Mechanical Properties of Ceramic Tool and Die Material with Immune Algorithm CPCI-S EI SCOPUS

作者:Zhang Huifa; Xu Chonghai; Zhang Jingjie; Wang Xinghai

作者机构:[Zhang Huifa; Xu Chonghai; Zhang Jingjie] Shandong Inst Light Ind, Sch Mech Engn, Jinan 250353, Peoples R China.; [Xu Chonghai] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Wang Xinghai] Shandong Inst Light Ind, Sch Mat Sci & Engn, Jinan 250353, Peoples R China.

会议名称:6th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNS)

会议日期:NOV 16-19, 2010

来源:PHYSICAL AND NUMERICAL SIMULATION OF MATERIAL PROCESSING VI, PTS 1 AND 2,2012,Vol.704-705,1083-1088

资源类型:会议论文;期刊论文

WOS:000309487300184

27. Numerical Simulation of Gasoline Blending in a Cylindrical Tank Agitated by Side-entering Agitators CPCI-S EI SCOPUS

作者:Chen, Songying; Xie, Fuchao; Mao, Junjie

作者机构:[Chen, Songying; Xie, Fuchao; Mao, Junjie] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

会议名称:International Conference on Energy, Environment and Sustainable Development (ICEESD 2011)

会议日期:OCT 21-23, 2011

来源:PROGRESS IN POWER AND ELECTRICAL ENGINEERING, PTS 1 AND 2,2012,Vol.354-355,589-593

WOS被引数:2

资源类型:会议论文;期刊论文

WOS:000309370300113

28. Research on illegal information flow in role-based access control model based on petri net EI SCOPUS

作者:Liu, Meng ;Wang, Xuan ;Zhao, Hainan

作者机构:[Liu, Meng ;Wang, Xuan ;Zhao, Hainan ] Computer Application Research Center, Harbin Institute of Technology Shenzhen Graduate School, Xili, Nanshan District, Shenzhen 518055, China;[Liu, Meng ] School of Mechanical, Electrical and Information Engineering, Shandong University at Weihai, No. 180, Wenhua West Road, Weihai 264209, China

来源:ICIC Express Letters,2012,Vol.6,Issue.1,139-144

资源类型:期刊论文

29. 错位六弯叶桨搅拌假塑性流体的洞穴变化 EI CSCD SCOPUS

作者:栾德玉;周慎杰;陈颂英

作者机构:[栾德玉] 青岛科技大学机电工程学院, 青岛, 山东 266061, 中国.;[周慎杰] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[陈颂英] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:机械工程学报,Jixie Gongcheng Xuebao/Journal of Mechanical Engineering,2012,Vol.48,Issue.16,152-157

资源类型:期刊论文

30. 混粉准干式电火花加工介质击穿机理研究 EI CSCD SCOPUS

作者:白雪;张勤河;李田田;张亚

作者机构:[白雪] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[张勤河] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[李田田] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[张亚] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:机械工程学报,Jixie Gongcheng Xuebao/Journal of Mechanical Engineering,2012,Vol.48,Issue.7,186-192+198

资源类型:期刊论文

31. 可变压缩比发动机技术现状的分析与研究

作者:孙常林;朱琰;谢宗法;

作者机构:[孙常林;朱琰;谢宗法]山东大学机械工程学院;[孙常林;朱琰;谢宗法]济南轻骑发动机有限公司

来源:内燃机与动力装置,Internal Combustion Engine & Powerplant,2012,Issue.03,51-54

资源类型:期刊论文

32. 公路隧道型钢喷射混凝土初期支护安全评价研究 EI CSCD SCOPUS

作者:徐帮树;杨为民;王者超;王育奎

作者机构:[徐帮树] 山东大学土建与水利学院城市地下空间工程系, 济南, 山东 250061, 中国.;[杨为民] 山东大学土建与水利学院城市地下空间工程系, 济南, 山东 250061, 中国.;[王者超] 山东大学土建与水利学院城市地下空间工程系, 济南, 山东 250061, 中国.;[王育奎] 山东大学土建与水利学院城市地下空间工程系, 济南, 山东 250061, 中国

来源:岩土力学,Yantu Lixue/Rock and Soil Mechanics,2012,Vol.33,Issue.1,248-254

资源类型:期刊论文

33. Thermal shock and thermal fatigue resistance of Sialon-Si3N4 graded composite ceramic materials SCOPUS SCIE

作者:Zheng, Guangming; Zhao, Jun; Jia, Chao; Tian, Xianhua; Dong, Yongwang; Zhou, Yonghui

作者机构:[Zheng, Guangming; Zhao, Jun; Jia, Chao; Tian, Xianhua; Dong, Yongwang; Zhou, Yonghui] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg MOE, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS,2012,Vol.35,55-61

WOS被引数:17

资源类型:期刊论文

WOS:000308623700008

34. 微米硬质相对相变增韧陶瓷刀具材料的影响

作者:钟金豹;黄传真;

作者机构:[钟金豹]内蒙古科技大学机械工程学院;[黄传真]山东大学机械工程学院先进射流工程技术研究中心

来源:现代制造技术与装备,Modern Manufacturing Technology and Equipment,2012,Issue.01,4-5+8

资源类型:期刊论文

35. KDP晶体杂质对生长及出槽应力分布的影响 EI CSCD SCOPUS

作者:葛培琪;袁方方;高玉飞;毕文波

作者机构:[葛培琪] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[袁方方] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[高玉飞] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[毕文波] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:人工晶体学报,Rengong Jingti Xuebao/Journal of Synthetic Crystals,2012,Vol.41,Issue.5,1180-1185

资源类型:期刊论文

36. 超磁致伸缩致动器功率驱动装置的谐波分析及抑制

作者:李永;林明星;张承瑞;翟鹏;王奇峰;刘小斌;

作者机构:[李永;林明星;张承瑞;翟鹏;王奇峰;刘小斌]山东大学机械工程学院;[李永;林明星;张承瑞;翟鹏;王奇峰;刘小斌]山东大学威海分校;[李永;林明星;张承瑞;翟鹏;王奇峰;刘小斌]山东滨州渤海活塞股份有限公司

来源:组合机床与自动化加工技术,Modular Machine Tool & Automatic Manufacturing Technique,2012,Issue.09,1-5

资源类型:期刊论文

37. 驾驶员疲劳检测中的彩色图像增强算法 EI CSCD SCOPUS

作者:张万枝;王增才;李云霞;王保平

作者机构:[张万枝] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王增才] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[李云霞] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王保平] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:光电子·激光,Guangdianzi Jiguang/Journal of Optoelectronics Laser,2012,Vol.23,Issue.8,1545-1549

资源类型:期刊论文

38. Influence of Inclination Angle on Machined Surface Hardness in High Speed Ball End Milling CPCI-S EI SCOPUS

作者:Han, Shiguo; Zhao, Jun; Chen, Xiaoxiao; Li, Yueen; Cao, Qingyuan; Dong, Yongwang

作者机构:[Han, Shiguo; Zhao, Jun; Chen, Xiaoxiao; Dong, Yongwang] Shandong Univ, Sch Mech Engn, MOE, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Peoples R China.; [Li, Yueen] Shandong Univ, Sch Art & Design, Jinan 250010, Peoples R China.; [Cao, Qingyuan] China Univ Petr, C-266555 Qingdao, Peoples R China.

会议名称:10th Asia-Pacific Conference on Materials Processing (APCMP 2012)

会议日期:JUN 14-17, 2012

来源:ADVANCES IN MATERIALS PROCESSING X,2012,Vol.500,134-139

资源类型:会议论文;期刊论文

WOS:000309638500022

39. Review of deep brain stimulation micro-electrodes CPCI-S EI SCOPUS

作者:Zhou, Jun; Liu, Peichao; Ullah, Saif; Zhang, Yunfeng; Li, Shoulei; Li, Xiaoping

作者机构:[Zhou, Jun; Li, Xiaoping] Natl Univ Singapore, Dept Mech Engn, Singapore 117548, Singapore.; [Zhou, Jun; Liu, Peichao; Li, Shoulei] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Ullah, Saif; Zhang, Yunfeng] Natl Univ Singapore, Dept Engn Mech, Singapore, Singapore.

会议名称:10th Asia-Pacific Conference on Materials Processing (APCMP 2012)

会议日期:JUN 14-17, 2012

来源:ADVANCES IN MATERIALS PROCESSING X,2012,Vol.500,596-602

资源类型:会议论文;期刊论文

WOS:000309638500097

40. Seismic performance study on steel frame structure with integral panels CPCI-S EI SCOPUS

作者:Hou, Hetao; Wu, Minglei; Liu, Miao; Ma, Qin

作者机构:[Hou, Hetao; Wu, Minglei; Ma, Qin] Shandong Univ, Sch Civil Engn, Jinan 250061, Peoples R China.; [Liu, Miao] Taian Huaxin Building Mat Co Ltd, Tai An 271000, Shandong, Peoples R China.

会议名称:2nd International Conference on Civil Engineering, Architecture and Building Materials (CEABM 2012)

会议日期:MAY 25-27, 2012

来源:PROGRESS IN STRUCTURE, PTS 1-4,2012,Vol.166-169,2373-2378

资源类型:会议论文;期刊论文

WOS:000310949801130

共 30 页, 583 条记录

TOP