按条件检索“226”条记录

已选条件: 数据来源: 万方 × 数据来源: CSSCI × 出版年: 2015 × 机构: 机械工程学院 × 机构: 能源与动力工程... ×
导出
  • 排序
  • 显示
1. 管流测试中激光技术的应用及分析

作者:王军;耿介;李东;王心慧;

作者机构:[王军;耿介;李东;王心慧]山东大学能源与动力工程学院;[王军;耿介;李东;王心慧]山东建筑大学

来源:现代制造技术与装备,Modern Manufacturing Technology and Equipment,2015,Issue.06,96-97

资源类型:期刊论文

2. 基于CAN总线技术的电子风扇控制器标定软件开发

作者:纪少波;陆国栋;任博;李可辉;

作者机构:[纪少波;陆国栋;任博;李可辉]浙江银轮机械股份有限公司;[纪少波;陆国栋;任博;李可辉]山东大学能源与动力工程学院

来源:内燃机与动力装置,Internal Combustion Engine & PowerPlant,2015,Issue.04,64-67

资源类型:期刊论文

3. 双燃料发动机电液协同控制天然气喷射阀运动特性研究 EI SCOPUS

作者:黄猛;王国仰;刘康;陆辰;王志明;

作者机构:[黄猛;王国仰;刘康;陆辰;王志明]山东大学能源与动力工程学院

来源:内燃机工程,Neiranji Gongcheng/Chinese Internal Combustion Engine Engineering,2015,Vol.36,Issue.6,151-156

资源类型:期刊论文

4. 小型天然气发电机组控制系统硬件设计

作者:盖永田;纪少波;程勇;赵盛晋;秦皓晟;

作者机构:[盖永田;纪少波;程勇;赵盛晋;秦皓晟]中国重汽技术中心;[盖永田;纪少波;程勇;赵盛晋;秦皓晟]山东大学能源与动力工程学院

来源:内燃机与动力装置,Internal Combustion Engine & PowerPlant,2015,Issue.06,1-5+30

资源类型:期刊论文

5. 发动机排气歧管总成热应力及疲劳计算

作者:陈永哲;雷舒蓉;费洪庆;闫伟;

作者机构:[陈永哲;雷舒蓉;费洪庆;闫伟]山东大学能源与动力工程学院

来源:内燃机与动力装置,Internal Combustion Engine & PowerPlant,2015,Issue.01,49-53

资源类型:期刊论文

6. EFFECTS OF ACUTE GLOBAL ISCHEMIA ON RE-ENTRANT ARRHYTHMOGENESIS: A SIMULATION STUDY SCOPUS SCIE

作者:Lu, Weigang;Li, Jie;Yang, Fei;Luo, Cunjin;Wang, Kuanquan;Adeniran, Ismail;Zhang, Henggui

作者机构:[Lu, W] Department of Educational Technology, Ocean University of China, Qingdao, China;[ Li, J] School of Electrical Engineering, Yanshan University, Qinhuangdao, China;[ Yang, F] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, China;[ Luo, C] School of Computer Science and Technology, Harbin Institute of Technology, Harbin, China;[ Wang, K] School of Computer Science and Technology, Harbin Institute of Technology, Harbin, China;[ Adeniran, I] School of Physics and Astronomy, University of Manchester, Manchester, United Kingdom;[ Zhang, H] School of Physics and Astronomy, University of Manchester, Manchester, United Kingdom

来源:Journal of biological systems,JOURNAL OF BIOLOGICAL SYSTEMS,2015,Vol.23,Issue.2,213-230

WOS被引数:5

资源类型:期刊论文

WOS:000355379500003

7. ASSEMBLY VARIATION MODELING METHOD RESEARCH OF COMPLIANT AUTOMOBILE BODY SHEET METAL PARTS USING THE FINITE ELEMENT METHOD EI SCOPUS SCIE

作者:Yu, K. G.;Yang, Z. H.

作者机构:[Yu, K.G] School of Mechanical Engineering, Shandong University, Jinan, SD531, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacturing Shandong University, Ministry of Education, Jinan, SD531, China;[ Yang, Z.H] School of Mechanical Engineering, Shandong University, Jinan, SD531, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacturing Shandong University, Ministry of Education, Jinan, SD531, China

来源:International Journal of Automotive Technology,INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY,2015,Vol.16,Issue.1,51-56

WOS被引数:6

资源类型:期刊论文

WOS:000348632500005

8. In-situ Fabricated TiB2 Particle-whisker Synergistically Toughened Ti(C, N)-based Ceramic Cutting Tool Material EI SCOPUS SCIE

作者:Liu Hanlian; Shi Qiang; Huang Chuanzhen; Zou Bin; Xu Liang; Wang Jun

作者机构:[Liu, H] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High-Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Shi, Q] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High-Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Huang, C] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High-Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Zou, B] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High-Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Xu, L] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High-Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Wang, J] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High-Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China

来源:中国机械工程学报,CHINESE JOURNAL OF MECHANICAL ENGINEERING,2015,Vol.28,Issue.2,338-342

WOS被引数:4

资源类型:期刊论文

WOS:000351028200014

9. Effect of Initial Residual Stress and Machining-Induced Residual Stress on the Deformation of Aluminium Alloy Plate EI SCOPUS SCIE

作者:Huang, Xiaoming;Sun, Jie;Li, Jianfeng

作者机构:[Huang, X] Shandong University, School of Mechanical Engineering, No.17923 Jingshi Road, China;[ Sun, J] Shandong University, School of Mechanical Engineering, No.17923 Jingshi Road, China, Ministry of Education, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, China;[ Li, J] Shandong University, School of Mechanical Engineering, No.17923 Jingshi Road, China, Ministry of Education, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, China

来源:Journal of Mechanical Engineering,STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING,2015,Vol.61,Issue.2,131-137

WOS被引数:9

资源类型:期刊论文

WOS:000350946000006

10. Research on thermoplastic starch and different fiber reinforced biomass composites EI SCOPUS SCIE

作者:Wang, Cheng-zhao;Li, Fang-yi;Wang, Li-ming;Li, Jian-feng;Guo, An-fu;Zhang, Chuan-wei;Liu, Peng

作者机构:[Wang, C.-Z] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Li, F.-Y] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Wang, L.-M] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Li, J.-F] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Guo, A.-F] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Zhang, C.-W] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Liu, P] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China

来源:RSC Advances,RSC ADVANCES,2015,Vol.5,Issue.62,49824-49830

WOS被引数:5

资源类型:期刊论文

WOS:000355987900001

11. 球墨铸铁活塞在燃气发动机中的应用

作者:于华;马相明;许自顺;韩奎超;

作者机构:[于华;马相明;许自顺;韩奎超]山东大学能源与动力工程学院

来源:内燃机,Internal Combustion Engines,2015,Issue.03,39-41+45

资源类型:期刊论文

12. 圆锯片–花岗石切割系统仿真研究 SCOPUS

作者:叶鲁浩;张进生;王志;黄波;鞠军伟;葛健煜;高丽君;

作者机构:[叶鲁浩;张进生;王志;黄波;鞠军伟;葛健煜;高丽君]山东大学机械工程学院;[叶鲁浩;张进生;王志;黄波;鞠军伟;葛健煜;高丽君]山东省石材工程技术研究中心;[叶鲁浩;张进生;王志;黄波;鞠军伟;葛健煜;高丽君]高效洁净机械制造教育部重点实验室(山东大学);[叶鲁浩;张进生;王志;黄波;鞠军伟;葛健煜;高丽君]山东大学海易研究院

来源:金刚石与磨料磨具工程,Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering,2015,Vol.35,Issue.3,35-39

资源类型:期刊论文

13. 基于遗传算法的动力总成悬置系统优化设计

作者:史振盛;张强;闫云乔;宋云平;

作者机构:[史振盛;张强;闫云乔;宋云平]山东大学能源与动力工程学院;[史振盛;张强;闫云乔;宋云平]福田雷沃国际重工股份有限公司

来源:内燃机与动力装置,Internal Combustion Engine & PowerPlant,2015,Issue.01,5-9

资源类型:期刊论文

14. 基于能量回收的等效燃油消耗最小策略 EI SCOPUS

作者:苗强;孙强;白书战;李国祥

作者机构:[苗强;孙强;白书战;李国祥]山东大学能源与动力工程学院,山东济南250061,中国

来源:华南理工大学学报:自然科学版,Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science),2015,Vol.43,Issue.11,112-118

资源类型:期刊论文

15. Fluid-Like Properties of Chip Flow in High-Speed Metal Cutting Process EI SCOPUS SCIE

作者:Zhang, Keguo;Liu, Zhanqiang;Wan, Yi;Wang, Bing;Ai, Xing

作者机构:[Zhang, K] Shandong University, Department of Mechanical Engineering, 17923 Jingshi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China;[ Liu, Z] Shandong University, Department of Mechanical Engineering, 17923 Jingshi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China;[ Wan, Y] Shandong University, Department of Mechanical Engineering, 17923 Jingshi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China;[ Wang, B] Shandong University, Department of Mechanical Engineering, 17923 Jingshi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China;[ Ai, X] Shandong University, Department of Mechanical Engineering, 17923 Jingshi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China

来源:Machining Science and Technology,MACHINING SCIENCE AND TECHNOLOGY,2015,Vol.19,Issue.1,71-85

WOS被引数:2

资源类型:期刊论文

WOS:000349164700003

16. Fabrication and dry cutting performance of Si3N4/TiC ceramic tools reinforced with the PVD WS2/Zr soft-coatings EI SCOPUS SCIE

作者:Xing, Youqiang;Deng, Jianxin;Zhang, Kedong;Wang, Xingsheng;Lian, Yunsong;Zhou, Yonghui

作者机构:[Xing, Y] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, Department of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Deng, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, Department of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Zhang, K] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, Department of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Wang, X] Department of Mechanical Engineering, Nanjing Agricultural University, Nanjing, 210031, China;[ Lian, Y] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, Department of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Zhou, Y] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, Department of Mechanical Engineering, Shandong University, Jinan, 250061, China

来源:CERAMICS INTERNATIONAL,CERAMICS INTERNATIONAL,2015,Vol.41,Issue.8,10261-10271

WOS被引数:9

资源类型:期刊论文

WOS:000356549100142

17. An Efficient Bypassing Void Routing Protocol Based on Virtual Coordinate for WSNs EI SCOPUS SCIE

作者:Zhang, Dejing;Dong, Enqing

作者机构:[Zhang, D] Department of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, 264209, China;[ Dong, E] Department of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, 264209, China

来源:IEEE communications letters: A publication of the IEEE Communications Society,IEEE COMMUNICATIONS LETTERS,2015,Vol.19,Issue.4,653-656

WOS被引数:2

资源类型:期刊论文

WOS:000352736500038

18. Cutting forces and tool failure in high-speed milling of titanium alloy TC21 with coated carbide tools EI SCOPUS SCIE

作者:Zhang, Hongxia;Zhao, Jun;Wang, Fuzeng;Zhao, Jiabang;Li, Anhai

作者机构:[Zhang, H] School of Mechanical Engineering, Shandong University, Jinan, China, School of Mechanical and Automotive Engineering, Qilu University of Technology, 3501 Daxue Road, Jinan, China;[ Zhao, J] School of Mechanical Engineering, Shandong University, Jinan, China;[ Wang, F] School of Mechanical Engineering, Shandong University, Jinan, China;[ Zhao, J] School of Mechanical Engineering, Shandong University, Jinan, China;[ Li, A] School of Mechanical Engineering, Shandong University, Jinan, China

来源:Proceedings of the Institution of Mechanical Engineers, Part B. Journal of engineering manufacture,PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2015,Vol.229,Issue.1,20-27

WOS被引数:8

资源类型:期刊论文

WOS:000347964500002

19. 纤维增强复合材料钻削分层的研磨检测

作者:汪海晋;孙杰;李剑峰;李卫东;

作者机构:[汪海晋;孙杰;李剑峰;李卫东]山东大学机械工程学院高效洁净机械制造教育部重点实验室;[汪海晋;孙杰;李剑峰;李卫东]中航工业成都飞机工业(集团)有限责任公司

来源:航空制造技术,Aeronautical Manufacturing Technology,2015,Issue.09,73-76

资源类型:期刊论文

20. Kinetics of Solvent Blue and Reactive Yellow removal using microwave radiation in combination with nanoscale zero-valent iron

作者:Yanpeng Mao;Zhenqian Xi;Wenlong Wang;Chunyuan Ma;Qinyan Yue;

作者机构:[Yanpeng Mao;Zhenqian Xi;Wenlong Wang;Chunyuan Ma;Qinyan Yue]School of Energy and Power Engineering, Shandong University;[Yanpeng Mao;Zhenqian Xi;Wenlong Wang;Chunyuan Ma;Qinyan Yue]School of Environmental Science and Engineering, Shandong University

来源:Journal of Environmental Sciences,2015,Issue.04,164-172

资源类型:期刊论文

共 12 页, 226 条记录

TOP