按条件检索“197”条记录

已选条件: 数据来源: CNKI × 数据来源: 万方 × 数据来源: CSCD × 数据来源: CSSCI × 出版年: 2013 × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
1. 锅炉水冷壁管腐蚀爆裂失效分析

作者:王鹏飞;王威强;汤杰;苏成功;刘华东;

作者机构:[王鹏飞;王威强;汤杰;苏成功;刘华东]山东大学机械工程学院;[王鹏飞;王威强;汤杰;苏成功;刘华东]山东省特种设备安全工程技术研究中心;[王鹏飞;王威强;汤杰;苏成功;刘华东]山东大学特种设备安全保障与评价研究中心

会议名称:压力容器先进技术——第八届全国压力容器学术会议

来源:压力容器先进技术——第八届全国压力容器学术会议论文集,2013

资源类型:会议论文

2. Wear Mechanism of Si_3N_4/TiC Micro-nano-composite Ceramic Tool in Dry Machining of Nodular Cast Iron

作者:Zhijie Lü;Mingfeng Ding;Jun Zhao;

作者机构:[Zhijie Lü;Mingfeng Ding;Jun Zhao]School of Mechanical and Electronic Engineering,Shandong Jianzhu University;[Zhijie Lü;Mingfeng Ding;Jun Zhao]Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE,School of Mechanical Engineering,Shandong University

来源:Proceedings of 2013 2nd International Conference on Chemical,Mechanical and Materials Engineering(CMME 2013),2013

资源类型:会议论文

3. Influences of Machining Parameters on Electrode Wear in Piezoelectric Self-adaptive Micro-EDM

作者:Xiuzhuo Fu;Liying Gao;Qinhe Zhang;

作者机构:[Xiuzhuo Fu;Liying Gao;Qinhe Zhang]School of Mechanical & Automotive Engineering,Shandong Polytechnic University;[Xiuzhuo Fu;Liying Gao;Qinhe Zhang]School of Mechanical Engineering,Shandong University

来源:Proceedings of 2013 2nd International Symposium on Materials Science and Engineering Technology(ISMSET 2013),2013

资源类型:会议论文

4. Analytical modeling and experimental investigation of tool and workpiece temperatures for interrupted cutting 1045 steel by inverse heat conduction method EI SCOPUS SCIE

作者:Fulin Jiang;Zhanqiang Liu;Yi Wan;Zhenyu Shi

作者机构:[Jiang, F] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Liu, Z] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Wan, Y] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Shi, Z] School of Mechanical Engineering, Shandong University, Jinan 250061, China

来源:Journal of Materials Processing Technology,JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2013,Vol.213,Issue.6,887-894

WOS被引数:19

资源类型:期刊论文

WOS:000317316500010

5. Stress Analysis of the Biomass Molding Mould Based on ANSYS

作者:Meng Jianfeng;Feng Baitao;Dong Yuping;

作者机构:[Meng Jianfeng;Feng Baitao;Dong Yuping]School of Mechanical Engineering, Shandong University

来源:Proceedings of 2013 2nd International Conference on Materials Science and Technology(ICMST 2013 Ⅱ),2013

资源类型:会议论文

6. Analysis of Leakage and Diffusion of Hazardous Chemicals Based on 3D Scene

作者:Zhang Wei Shuai;Han YunPeng;

作者机构:[Zhang Wei Shuai]JiNan PengBo Digital Security Technology Co.,LTD;[Han YunPeng]School of Mechanical Engineering, Shandong University

来源:Proceedings of 2013 2nd International Conference on Materials Science and Technology(ICMST 2013 Ⅱ),2013

资源类型:会议论文

7. A novel image sensor for raised characters based on structured-light EI SCOPUS SCIE

作者:Li, X.;Lu, C.;Xiao, R.;Zhang, J.;Ding, J.

作者机构:[Li, X] Mechanical Engineering, Shandong University, Jinan, China;[ Lu, C] Mechanical Engineering, Shandong University, Jinan, China;[ Xiao, R] Mechanical Engineering, Shandong University, Jinan, China;[ Zhang, J] Mechanical Engineering, Shandong University, Jinan, China;[ Ding, J] Mechanical Engineering, Shandong University, Jinan, China

来源:Sensor Review,SENSOR REVIEW,2013,Vol.33,Issue.2,134-140

WOS被引数:2

资源类型:期刊论文

WOS:000317805500005

8. An innovative method for surface defects prevention in micro milling and its implementation perspectives EI SCOPUS SCIE

作者:Yi Wan;Kai Cheng;Shufeng Sun

作者机构:[Wan, Y] Key Laboratory of High Efficiency and Clean Manufacturing, Shandong University, Shandong, China, AMEE Department, School of Engineering and Design, Brunel University, Uxbridge, United Kingdom;[ Cheng, K] AMEE Department, School of Engineering and Design, Brunel University, Uxbridge, United Kingdom;[ Sun, S] College of Mechanical and Electrical Engineering, Wenzhou University, China

来源:Proceedings of the Institution of Mechanical Engineers, Part J. Journal of engineering tribology,PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY,2013,Vol.227,Issue.12,1347-1355

WOS被引数:6

资源类型:期刊论文

WOS:000326778500003

9. Damping research of fiber-reinforced resin mineral composite-based micromechanical modeling EI SCOPUS SCIE

作者:Tao Wang;Jianhua Zhang;Shimei Hao

作者机构:[Wang, T] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education of China, 17923 Jingshi Road, Jinan, 250061, China;[ Zhang, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education of China, 17923 Jingshi Road, Jinan, 250061, China;[ Hao, S] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education of China, 17923 Jingshi Road, Jinan, 250061, China

来源:Journal of Reinforced Plastics and Composites,JOURNAL OF REINFORCED PLASTICS AND COMPOSITES,2013,Vol.32,Issue.12,875-880

WOS被引数:4

资源类型:期刊论文

WOS:000319814800002

10. V_2O_5-WO_3-MoO_3/TiO_2催化剂在柴油机NH_3-SCR系统中的性能 EI SCOPUS

作者:高岩;栾涛;彭吉伟;XU Hongming;

作者机构:[高岩;栾涛;彭吉伟;XU Hongming]山东大学能源与动力工程学院;[高岩;栾涛;彭吉伟;XU Hongming]伯明翰大学机械学院

来源:化工学报,Huagong Xuebao/CIESC Journal,2013,Vol.64,Issue.9,3356-3366

资源类型:期刊论文

11. 局部吸附圆形微膜的动态特性分析

作者:周莎莎;周慎杰;李安庆;

作者机构:[周莎莎;周慎杰;李安庆]山东大学机械学院

会议名称:中国力学大会——2013

来源:中国力学大会——2013论文摘要集,2013

资源类型:会议论文

12. 供油系统对二甲醚发动机燃烧循环变动的影响 EI CSCD SCOPUS

作者:张强;李娜;张纪元;李国祥

作者机构:[张强] 山东大学能源与动力工程学院, 济南, 山东 250061, 中国.;[李娜] 山东大学能源与动力工程学院, 济南, 山东 250061, 中国.;[李国祥] 山东大学能源与动力工程学院, 济南, 山东 250061, 中国.;[张纪元] 潍柴动力股份有限公司, 潍坊, 山东 261001, 中国

来源:农业机械学报,Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery,2013,Vol.44,Issue.1,17-20+32

资源类型:期刊论文

13. 机械产品设计向导快速构建方法

作者:伍英杰;高琦;王培刚;吕国锴;高蕾;

作者机构:[伍英杰;高琦;王培刚;吕国锴;高蕾]山东大学机械工程学院;[伍英杰;高琦;王培刚;吕国锴;高蕾]山东大学高效洁净机械制造教育部重点实验室;[伍英杰;高琦;王培刚;吕国锴;高蕾]山东山大华天软件有限公司;[伍英杰;高琦;王培刚;吕国锴;高蕾]胜利油田电力管理总公司电力标准计量站

来源:制造业自动化,2013,Issue.11,18-20

资源类型:期刊论文

14. Mixing of initially stratified miscible fluids in an eccentric stirred tank: Detached eddy simulation and volume of fluid study SCOPUS SCIE

作者:Feng Ling Yang;Shen Jie Zhou;Cui Xun Zhang;Gui Chao Wang

作者机构:[Yang, F.L] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, 250061, China;[ Zhou, S.J] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, 250061, China;[ Zhang, C.X] Tianli Drying Equipment Incorporated Company, Shandong Province Academy of Sciences, Jinan, 250014, China;[ Wang, G.C] School of Mechanical Engineering, Shandong University, Jinan, 250061, China

来源:The Korean journal of chemical engineering,KOREAN JOURNAL OF CHEMICAL ENGINEERING,2013,Vol.30,Issue.10,1843-1854

WOS被引数:5

资源类型:期刊论文

WOS:000325237400004

15. Approach of Synthesizing Model Predictive Control and Its Applications for Rotary Kiln Calcination Process

作者:ZHANG Li;GAO Xian-wen;

作者机构:[ZHANG Li]School of Mechanical,Electrical and Information Engineering,Shandong University;[GAO Xian-wen]School of Information Science and Engineering,Northeastern University

来源:Journal of Iron and Steel Research(International),2013,Issue.08,14-19

资源类型:期刊论文

16. An integrated CNC accumulation system for automatic building-around-inserts EI SCOPUS SCIE

作者:Xuejin Zhao;Yayue Pan;Chi Zhou;Yong Chen;Charlie C.L. Wang

作者机构:[Zhao, X] Epstein Department of Industrial and Systems Engineering, University of Southern California, McClintock Avenue, GER 201, Los Angeles, CA 90089, United States, School of Mechanical Engineering, Shandong University, Ji'nan, Shandong, China;[ Pan, Y] Epstein Department of Industrial and Systems Engineering, University of Southern California, McClintock Avenue, GER 201, Los Angeles, CA 90089, United States;[ Zhou, C] Epstein Department of Industrial and Systems Engineering, University of Southern California, McClintock Avenue, GER 201, Los Angeles, CA 90089, United States;[ Chen, Y] Epstein Department of Industrial and Systems Engineering, University of Southern California, McClintock Avenue, GER 201, Los Angeles, CA 90089, United States;[ Wang, C.C.L] Department of Mechanical and Automation Engineering, Chinese University of Hong Kong, China

来源:Journal of manufacturing processes,JOURNAL OF MANUFACTURING PROCESSES,2013,Vol.15,Issue.4,432-443

WOS被引数:8

资源类型:期刊论文

WOS:000209272400006

17. 雷达高距离分辨率一维像目标识别 EI CSCD SCOPUS

作者:郭尊华;李达;张伯彦

作者机构:[郭尊华] 山东大学(威海)机电与信息工程学院, 威海, 山东 264209, 中国.;[李达] 武汉理工大学信息工程学院, 武汉, 湖北 430070, 中国.;[张伯彦] 北京无线电测量研究所, 北京 100854, 中国

来源:系统工程与电子技术,Xi Tong Gong Cheng Yu Dian Zi Ji Shu/Systems Engineering and Electronics,2013,Vol.35,Issue.1,53-60

资源类型:期刊论文

18. Experimental study of shell side flow-induced vibration of conical spiral tube bundle

作者:闫柯;葛培琪;洪军;

作者机构:[闫柯]Key Laboratory for Modern Design and Rotor-Bearing System of MOE, Xi'an Jiaotong University;[葛培琪]School of Mechanical Engineering, Shandong University;[洪军]State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University

来源:Journal of Hydrodynamics,2013,Issue.05,695-701

资源类型:期刊论文

19. 复合微梁静态弯曲特性的尺寸效应

作者:李安庆;周慎杰;周莎莎;

作者机构:[李安庆;周慎杰;周莎莎]山东大学(千佛山校区)机械工程学院

会议名称:中国力学大会——2013

来源:中国力学大会——2013论文摘要集,2013

资源类型:会议论文

20. 淀粉/植物纤维改性的研究现状

作者:刘鹏;李方义;管凯凯;李刚;李剑峰;贾秀杰;

作者机构:[刘鹏;李方义;管凯凯;李刚;李剑峰;贾秀杰]山东大学机械工程学院&高效洁净机械制造教育部重点实验室

会议名称:第八届中国功能材料及其应用学术会议

来源:材料保护,2013,Issue.S2,154-159

资源类型:会议论文;期刊论文

共 10 页, 197 条记录

TOP