按条件检索“124”条记录

已选条件: 数据来源: 万方 × 数据来源: CSCD × 出版年: 2014 × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
1. New cross-matching algorithm in large-scale catalogs with ThreadPool technique EI SCOPUS SCIE

作者:DU Peng;REN JuanJuan;PAN JingChang;LUO ALi

作者机构:[Du, P] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China, Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China;[ Ren, J] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China;[ Pan, J] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China;[ Luo, A] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China, Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China

来源:中国科学(物理学、力学、天文学)(英文版),SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY,2014,Vol.57,Issue.3,577-583

WOS被引数:1

资源类型:期刊论文

WOS:000331961200023

2. Analysis of the machining performance and surface integrity in laser milling of polycrystalline diamonds EI SCOPUS SCIE

作者:Qi Wu;Jun Wang;Chuanzhen Huang

作者机构:[Wu, Q] School of Mechanical and Manufacturing Engineering, University of New South Wales, Sydney, NSW 2052, Australia;[ Wang, J] School of Mechanical and Manufacturing Engineering, University of New South Wales, Sydney, NSW 2052, Australia;[ Huang, C] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, School of Mechanical Engineering, Shandong University, Jinan, China

来源:Proceedings of the Institution of Mechanical Engineers, Part B. Journal of engineering manufacture,PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2014,Vol.228,Issue.6,903-917

WOS被引数:5

资源类型:期刊论文

WOS:000337976000009

3. WS_2/Zr软涂层微纳织构陶瓷刀具的制备及其切削性能

作者:邢佑强;邓建新;岳鸿志;高鹏;孟荣;周咏辉;

作者机构:[邢佑强;邓建新;岳鸿志;高鹏;孟荣;周咏辉]山东大学机械工程学院

来源:航空制造技术,2014,Issue.12,48-53

资源类型:期刊论文

4. 双缸一室型可变压缩比发动机的研究

作者:张佰力;孙常林;张玉川;赵生彦;

作者机构:[张佰力]山东省交通运输厅;[孙常林]山东大学机械工程学院;[张玉川]塔斯马尼亚大学科学与技术工程学院;[赵生彦]济南先机科技有限公司

来源:内燃机与动力装置,Internal Combustion Engine & PowerPlant,2014,Issue.05,7-10

资源类型:期刊论文

5. 约束阻尼型减振镗杆 EI SCOPUS

作者:夏峰;刘战强;宋清华;

作者机构:[夏峰;刘战强;宋清华]山东大学机械工程学院高效洁净机械制造教育部重点实验室

来源:航空学报,Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica,2014,Vol.35,Issue.9,2652-2659

资源类型:期刊论文

6. EXPERIMENTAL STUDY ON CUTTING FORCES AND SURFACE INTEGRITY IN HIGH-SPEED SIDE MILLING OF Ti-6Al-4V TITANIUM ALLOY EI SCOPUS SCIE

作者:Wang, Fuzeng;Zhao, Jun;Li, Anhai;Zhao, Jiabang

作者机构:[Wang, F] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan 250061, China;[ Zhao, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan 250061, China;[ Li, A] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan 250061, China;[ Zhao, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan 250061, China

来源:Machining Science and Technology,MACHINING SCIENCE AND TECHNOLOGY,2014,Vol.18,Issue.3,448-463

WOS被引数:12

资源类型:期刊论文

WOS:000340397500006

7. 双层微梁固有特性的尺寸效应 EI SCOPUS

作者:李安庆;周慎杰;周莎莎;

作者机构:[李安庆;周慎杰;周莎莎]山东大学机械工程学院

来源:工程力学,Gongcheng Lixue/Engineering Mechanics,2014,Vol.31,Issue.7,223-228

资源类型:期刊论文

8. A study on in-situ synthesis of TiB_2-SiC ceramic composites by reactive hot pressing SCOPUS SCIE

作者:Guolong Zhao;Chuanzhen Huang;Hanlian Liu

作者机构:[Zhao, G] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, China;[ Huang, C] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, China;[ Liu, H] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, China;[ Zou, B] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, China;[ Zhu, H] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, China;[ Wang, J] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, China

来源:CERAMICS INTERNATIONAL,CERAMICS INTERNATIONAL,2014,Vol.40,Issue.1,2305-2313

WOS被引数:23

资源类型:期刊论文

WOS:000330820600134

9. 陶瓷刀具超高速铣削镍基高温合金刀具失效机理研究

作者:郑光明;赵军;徐汝锋;程祥;赵国勇;

作者机构:[郑光明;赵军;徐汝锋;程祥;赵国勇]山东理工大学机械工程学院;[郑光明;赵军;徐汝锋;程祥;赵国勇]山东大学机械工程学院

来源:组合机床与自动化加工技术,2014,Issue.10,127-130

资源类型:期刊论文

10. Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box-Behnken design EI SCOPUS SCIE

作者:Dun Liu;Chuanzhen Huang;Jun Wang

作者机构:[Liu, D] Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Huang, C] Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Wang, J] Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Zhu, H] Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Yao, P] Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Liu, Z] Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China

来源:CERAMICS INTERNATIONAL,CERAMICS INTERNATIONAL,2014,Vol.40,Issue.6,7899-7908

WOS被引数:18

资源类型:期刊论文

WOS:000335201800030

11. The influence of Nb on hot corrosion behavior of Ni-based superalloy at 800 °C in a mixture of Na2SO4–NaCl EI SCOPUS SCIE

作者:Fei Weng

作者机构:[Weng, F] Key Lab. for Liquid-Solid Struc. Evol. and Proc. of Mate. (Ministry of Education), Department of Materials Science and Engineering, Shandong University, Ji'nan, Shandong, 250061, China;[ Yu, H] Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Ji'nan, Shandong, 250061, China;[ Wan, K] Key Lab. for Liquid-Solid Struc. Evol. and Proc. of Mate. (Ministry of Education), Department of Materials Science and Engineering, Shandong University, Ji'nan, Shandong, 250061, China;[ Chen, C] Key Lab. for Liquid-Solid Struc. Evol. and Proc. of Mate. (Ministry of Education), Department of Materials Science and Engineering, Shandong University, Ji'nan, Shandong, 250061, China

来源:Journal of Materials Research,JOURNAL OF MATERIALS RESEARCH,2014,Vol.29,Issue.21,2596-2603

WOS被引数:5

资源类型:期刊论文

WOS:000344598800013

12. Vibration of sensor diaphragm with residual stress coupled with liquids: effect of the residual stress EI SCOPUS SCIE

作者:Huayong Wu;Shenjie Zhou

作者机构:[Wu, H] School of Mechanical Engineering, Shandong University, Jinan, China;[ Zhou, S] School of Mechanical Engineering, Shandong University, Jinan, China

来源:Sensor Review,SENSOR REVIEW,2014,Vol.34,Issue.1,110-116

WOS被引数:1

资源类型:期刊论文

WOS:000330600500013

13. 一种高效的工业实时以太网网关的设计

作者:孙书仁;张承瑞;胡天亮;

作者机构:[孙书仁;张承瑞;胡天亮]山东大学机械工程学院;[孙书仁;张承瑞;胡天亮]山东大学高效与洁净机械制造教育部重点实验室

来源:组合机床与自动化加工技术,Modular Machine Tool & Automatic Manufacturing Technique,2014,Issue.01,90-92+95

资源类型:期刊论文

14. 能量有效的分布式链路调度协议 EI CSCD SCOPUS

作者:董恩清;乔富龙;邹宗骏;王佳仁;张德敬;李立

作者机构:[董恩清] 山东大学(威海)机电与信息工程学院, 威海, 山东 264209, 中国.;[乔富龙] 山东大学(威海)机电与信息工程学院, 威海, 山东 264209, 中国.;[邹宗骏] 山东大学(威海)机电与信息工程学院, 威海, 山东 264209, 中国.;[王佳仁] 山东大学(威海)机电与信息工程学院, 威海, 山东 264209, 中国.;[张德敬] 山东大学(威海)机电与信息工程学院, 威海, 山东 264209, 中国.;[李立] 中山大学肿瘤医院影像与微创介入中心, 广州, 广东 510060, 中国

来源:光学精密工程,Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2014,Vol.22,Issue.2,474-480

资源类型:期刊论文

15. 一种基于数字控制的一阶时滞不稳定系统 P和PI控制器设计方法 CSCD SCOPUS

作者:Leng,Tongtong;Yan,Peng

作者机构:[冷同同] 高效洁净机械制造教育部重点实验室(山东大学);山东大学机械工程学院, 济南, 山东 250061, 中国.;[闫鹏] 高效洁净机械制造教育部重点实验室(山东大学);山东大学机械工程学院, 济南, 山东 250061, 中国

来源:中国科学技术大学学报,Journal of University of Science and Technology of China,2014,Vol.44,Issue.10,804-810

资源类型:期刊论文

16. 低温冷冻皮肤组织仿真实验结果分析 CSCD

作者:赵艳哲;孙杰;王克玉

作者机构:[赵艳哲] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[孙杰] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[王克玉] 山东大学齐鲁医院, 济南, 山东 250012, 中国

来源:中国医学物理学杂志,Chinese Journal of Medical Physics,2014,Vol.31,Issue.1,4699-4703+4722

资源类型:期刊论文

17. 多温区冷藏车回风导轨对厢内温度场的影响分析 CSCD

作者:赵鑫鑫;王家敏;李丽娟;姜兆亮

作者机构:[赵鑫鑫] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[姜兆亮] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王家敏] 山东大学机械工程学院, 国家农产品现代物流工程技术研究中心, 济南, 山东 250061, 中国.;[李丽娟] 国家农产品现代物流工程技术研究中心, 国家农产品现代物流工程技术研究中心, 济南, 山东 250103, 中国

来源:食品与机械,Food and Machinery,2014,Vol.30,Issue.1,149-154

资源类型:期刊论文

18. 基于SIMULINK的齿轮-转子-轴承系统非线性动力学仿真 CSCD

作者:吴凯;张丽娜

作者机构:[吴凯] 宁夏大学机械工程学院, 银川, 宁夏 750021, 中国.;[张丽娜] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:机械传动,Journal of Mechanical Transmission,2014,Vol.38,Issue.2,71-74

资源类型:期刊论文

19. 生物质气化尾气CO_2联合微波重整甲苯制备合成气 EI CSCD SCOPUS

作者:李龙之;宋占龙;马春元;王孚懋;田原宇

作者机构:[李龙之] 山东科技大学机械电子工程学院, 青岛, 山东 266590, 中国.;[王孚懋] 山东科技大学机械电子工程学院, 青岛, 山东 266590, 中国.;[宋占龙] 山东大学, 燃煤污染物减排国家工程实验室, 济南, 山东 250061, 中国.;[马春元] 山东大学, 燃煤污染物减排国家工程实验室, 济南, 山东 250061, 中国.;[田原宇] 山东科技大学化学与环境工程学院, 青岛, 山东 266590, 中国

来源:农业工程学报,Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering,2014,Vol.30,Issue.23,268-274

资源类型:期刊论文

20. 采用改进粒子群优化粒子滤波的三维人手跟踪 EI CSCD SCOPUS

作者:李东年;周以齐

作者机构:[李东年] 山东大学机械工程学院虚拟工程研究中心, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[周以齐] 山东大学机械工程学院虚拟工程研究中心, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:光学精密工程,Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2014,Vol.22,Issue.10,2870-2878

资源类型:期刊论文

共 7 页, 124 条记录

TOP