按条件检索“142”条记录

已选条件: 数据来源: 万方 × 出版年: 2015 × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
1. DYNAMIC ANALYSIS OF A COMPRESSOR-DRIVEN CHEMISORPTION SYSTEM WITH A GAS COOLER UNDER THE TIME-DELAY CYCLE EI SCOPUS SCIE

作者:Lai, Yanhua;Dong, Zhen;Lyu, Mingxin

作者机构:[Lai, Y] School of Energy and Power Engineering, Shandong University, Jinan, 250061, China;[ Dong, Z] School of Energy and Power Engineering, Shandong University, Jinan, 250061, China;[ Lyu, M] School of Energy and Power Engineering, Shandong University, Jinan, 250061, China, School of Mechanical Engineering, Tianjin University, Tianjin, 300192, China

来源:Heat Transfer Research,HEAT TRANSFER RESEARCH,2015,Vol.46,Issue.3,251-270

资源类型:期刊论文

WOS:000351781800005

2. 双层错位CD-6桨搅拌槽内的气液混合性能 EI CSCD SCOPUS

作者:杨锋苓;周慎杰

作者机构:[杨锋苓] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[周慎杰] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:华中科技大学学报. 自然科学版,Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition),2015,Vol.43,Issue.11,16-21

资源类型:期刊论文

3. 涂层刀具表面织构化及切削性能研究 CSCD

作者:张克栋;邓建新;邢佑强;张国栋;高焕焕

作者机构:[张克栋] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[邓建新] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[邢佑强] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[张国栋] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[高焕焕] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:润滑与密封,Lubrication Engineering,2015,Vol.40,Issue.2,8-16+22

资源类型:期刊论文

4. 纤维增强复合材料钻削分层的研磨检测

作者:汪海晋;孙杰;李剑峰;李卫东;

作者机构:[汪海晋;孙杰;李剑峰;李卫东]山东大学机械工程学院高效洁净机械制造教育部重点实验室;[汪海晋;孙杰;李剑峰;李卫东]中航工业成都飞机工业(集团)有限责任公司

来源:航空制造技术,Aeronautical Manufacturing Technology,2015,Issue.09,73-76

资源类型:期刊论文

5. 自动脉冲刷镀工艺参数对镍–氧化铝复合镀层残余应力的影响

作者:海源;张松;李剑峰;满佳;

作者机构:[海源;张松;李剑峰;满佳]山东大学机械工程学院高效洁净机械制造教育部重点实验室(山东大学)

来源:电镀与涂饰,2015,Issue.19,1088-1092

资源类型:期刊论文

6. Rock breaking performance of a pick assisted by high-pressure water jet under different configuration modes EI SCOPUS SCIE

作者:Liu Songyong; Liu Xiaohui; Chen Junfeng; Lin Mingxing

作者机构:[Liu, S] School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou, 221116, China;[ Liu, X] School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou, 221116, China;[ Chen, J] Research Institute of Zhejiang University, Taizhou, 318000, China;[ Lin, M] School of Mechanical Engineering, Shandong University, Jinan, 250061, China

来源:中国机械工程学报,CHINESE JOURNAL OF MECHANICAL ENGINEERING,2015,Vol.28,Issue.3,607-617

WOS被引数:9

资源类型:期刊论文

WOS:000354707900020

7. 微纳织构涂层刀具研究进展

作者:张克栋;邓建新;姜超;陈帅;刘亚运;

作者机构:[张克栋;邓建新;姜超;陈帅;刘亚运]山东大学机械工程学院

来源:航空制造技术,Aeronautical Manufacturing Technology,2015,Issue.06,38-42

资源类型:期刊论文

8. Fabrication and dry cutting performance of Si3N4/TiC ceramic tools reinforced with the PVD WS2/Zr soft-coatings EI SCOPUS SCIE

作者:Xing, Youqiang;Deng, Jianxin;Zhang, Kedong;Wang, Xingsheng;Lian, Yunsong;Zhou, Yonghui

作者机构:[Xing, Y] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, Department of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Deng, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, Department of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Zhang, K] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, Department of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Wang, X] Department of Mechanical Engineering, Nanjing Agricultural University, Nanjing, 210031, China;[ Lian, Y] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, Department of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Zhou, Y] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, Department of Mechanical Engineering, Shandong University, Jinan, 250061, China

来源:CERAMICS INTERNATIONAL,CERAMICS INTERNATIONAL,2015,Vol.41,Issue.8,10261-10271

WOS被引数:9

资源类型:期刊论文

WOS:000356549100142

9. 网页版微博的模块色彩研究

作者:张明明;任怡霖;

作者机构:[张明明;任怡霖]山东大学机械工程学院工业设计系

来源:科技创新与应用,Technology Innovation a,2015,Issue.07,51

资源类型:期刊论文

10. Design and analysis of an X-Y parallel nanopositioner supporting large-stroke servomechanism EI SCOPUS SCIE

作者:Liu, Pengbo;Yan, Peng;Zhang, Zhen

作者机构:[Liu, P] Key Laboratory of High-Efficiency and Clean Mechanical Manufacturing, School of Mechanical Engineering, Shandong University, Jinan, Shandong, 250061, China;[ Yan, P] Key Laboratory of High-Efficiency and Clean Mechanical Manufacturing, School of Mechanical Engineering, Shandong University, Jinan, Shandong, 250061, China, School of Automation Science and Electrical Engineering, Beihang University, Beijing, China;[ Zhang, Z] Department of Mechanical Engineering, Tsinghua University, Beijing, China, Beijing Key Lab of Precision/Ultra-Precision Manufacturing Equipment and Control, Tsinghua University, Beijing, China

来源:Proceedings of the Institution of Mechanical Engineers, Part C. Journal of mechanical engineering science,PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2015,Vol.229,Issue.2,364-376

WOS被引数:9

资源类型:期刊论文

WOS:000347164500015

11. 基于动力学理论分析与仿真的救生缓降器设计

作者:韩玉勇;刘云辉;李自国;

作者机构:[韩玉勇;刘云辉;李自国]山东大学机械工程学院;[韩玉勇;刘云辉;李自国]枣庄科技职业学院

来源:消防科学与技术,2015,Issue.10,1380-1386

资源类型:期刊论文

12. 浅谈留白在招贴版式中的设计运用

作者:刘羽佳;刘彦鹏;

作者机构:[刘羽佳]山东大学机械工程学院;[刘彦鹏]山东大学艺术学院

来源:大众文艺,Art and Literature for the Masses,2015,Issue.24,55-56

资源类型:期刊论文

13. Implementation of a Parallel Algorithm Based on a Spark Cloud Computing Platform EI SCOPUS

作者:Wang Longhui;Wang Yong;Xie Yudong;Fernau Henning

作者机构:[Wang, L] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, 250061, China;[ Wang, Y] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, 250061, China;[ Xie, Y] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, 250061, China

来源:Algorithms,Algorithms,2015,Vol.8,Issue.3,407-414

资源类型:期刊论文

14. 换热器内弹性管束固有阵型对换热性能的影响

作者:蔡莉莉;葛培琪;

作者机构:[蔡莉莉]山东大学机械工程学院;[葛培琪]山东大学高效洁净机械制造教育部重点实验室

来源:节能技术,Energy Conservation Technology,2015,Issue.06,509-511+525

资源类型:期刊论文

15. Cutting forces and tool failure in high-speed milling of titanium alloy TC21 with coated carbide tools EI SCOPUS SCIE

作者:Zhang, Hongxia;Zhao, Jun;Wang, Fuzeng;Zhao, Jiabang;Li, Anhai

作者机构:[Zhang, H] School of Mechanical Engineering, Shandong University, Jinan, China, School of Mechanical and Automotive Engineering, Qilu University of Technology, 3501 Daxue Road, Jinan, China;[ Zhao, J] School of Mechanical Engineering, Shandong University, Jinan, China;[ Wang, F] School of Mechanical Engineering, Shandong University, Jinan, China;[ Zhao, J] School of Mechanical Engineering, Shandong University, Jinan, China;[ Li, A] School of Mechanical Engineering, Shandong University, Jinan, China

来源:Proceedings of the Institution of Mechanical Engineers, Part B. Journal of engineering manufacture,PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2015,Vol.229,Issue.1,20-27

WOS被引数:8

资源类型:期刊论文

WOS:000347964500002

16. Effects of cutting parameters on chip morphology and tool wear in high-speed face milling of hardened steel EI SCOPUS SCIE

作者:Cui, Xiaobin;Zhao, Jun

作者机构:[Cui, X] School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, 454003, China;[ Zhao, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, China

来源:Proceedings of the Institution of Mechanical Engineers, Part B. Journal of engineering manufacture,PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2015,Vol.229,Issue.6,921-931

WOS被引数:2

资源类型:期刊论文

WOS:000353989900003

17. An Efficient Bypassing Void Routing Protocol Based on Virtual Coordinate for WSNs EI SCOPUS SCIE

作者:Zhang, Dejing;Dong, Enqing

作者机构:[Zhang, D] Department of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, 264209, China;[ Dong, E] Department of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, 264209, China

来源:IEEE communications letters: A publication of the IEEE Communications Society,IEEE COMMUNICATIONS LETTERS,2015,Vol.19,Issue.4,653-656

WOS被引数:2

资源类型:期刊论文

WOS:000352736500038

18. 基于EMD与峭度滤波的煤岩界面识别 EI CSCD SCOPUS

作者:丛晓妍;王增才;王保平;彭伟利

作者机构:[丛晓妍] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王增才] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[彭伟利] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王保平] 山东交通学院机械工程学院, 济南, 山东 250023, 中国

来源:振动、测试与诊断,Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis,2015,Vol.35,Issue.5,950-954+995-996

资源类型:期刊论文

19. 复合型裂纹的扩展路径模拟及疲劳寿命预测 EI CSCD SCOPUS

作者:王建明;刘伟;吕鹤婷

作者机构:[王建明] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[刘伟] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[吕鹤婷] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:哈尔滨工程大学学报,Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University,2015,Vol.36,Issue.8,1086-1091

资源类型:期刊论文

20. Stellar atmospheric parameter estimation using Gaussian process regression SCOPUS SCIE

作者:Bu, Yude;Pan, Jingchang

作者机构:[Bu, Y] School of Mathematics, and Statistics, Shandong University, Weihai Shandong, 264209, China;[ Pan, J] School of Mechanical, Electrical, and Information Engineering, Shandong University, Weihai Shandong, 264209, China

来源:Monthly notices of the Royal Astronomical Society,MONTHLY NOTICES OF THE ROYAL ASTRONOMICAL SOCIETY,2015,Vol.447,Issue.1,256-265

WOS被引数:6

资源类型:期刊论文

WOS:000350272700019

共 8 页, 142 条记录

TOP