按条件检索“142”条记录

已选条件: 数据来源: 万方 × 出版年: 2015 × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
21. 工程机械司机室内噪声信号盲源分离及特性分析

作者:侯笑雅;

作者机构:[侯笑雅]山东大学机械工程学院

来源:山东工业技术,2015,Issue.15,87

资源类型:期刊论文

22. 基于故障树分析的数控装置硬件平台功能安全设计与实现

作者:袁晓慧;尹震宇;黄祖广;王帅华;

作者机构:[袁晓慧;尹震宇;黄祖广;王帅华]中国科学院大学;[袁晓慧;尹震宇;黄祖广;王帅华]中国科学院沈阳计算技术研究所总线实验室;[袁晓慧;尹震宇;黄祖广;王帅华]沈阳高精数控技术有限公司;[袁晓慧;尹震宇;黄祖广;王帅华]山东大学机械工程学院;[袁晓慧;尹震宇;黄祖广;王帅华]国家机床质量监督检测中心

来源:组合机床与自动化加工技术,Modular Machine Tool & Automatic Manufacturing Technique,2015,Issue.08,70-73+78

资源类型:期刊论文

23. Effect of Initial Residual Stress and Machining-Induced Residual Stress on the Deformation of Aluminium Alloy Plate EI SCOPUS SCIE

作者:Huang, Xiaoming;Sun, Jie;Li, Jianfeng

作者机构:[Huang, X] Shandong University, School of Mechanical Engineering, No.17923 Jingshi Road, China;[ Sun, J] Shandong University, School of Mechanical Engineering, No.17923 Jingshi Road, China, Ministry of Education, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, China;[ Li, J] Shandong University, School of Mechanical Engineering, No.17923 Jingshi Road, China, Ministry of Education, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, China

来源:Journal of Mechanical Engineering,STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING,2015,Vol.61,Issue.2,131-137

WOS被引数:9

资源类型:期刊论文

WOS:000350946000006

24. Deformation-Induced Martensitic Transformation in Cu-Zr-Zn Bulk Metallic Glass Composites SCOPUS SCIE

作者:Wu Dianyu;Song Kaikai;Cao Chongde;Li Ran;Wang Gang;Wu Yuan;Wan Feng;Ding Fuli;Shi Yue;Bai Xiaojun;Kaban Ivan;Eckert Jürgen;Chan

作者机构:[Wu, D] Department of Physics, School of Science, Northwestern Polytechnical University, Youyi Xilu 127, Xi’an, 710072, China;[ Song, K] School of Mechanical, Electrical and Information Engineering, Shandong University (Weihai), Wenhua Xilu 180, Weihai, 264209, China, IFW Dresden, Institute for Complex Materials, Helmholtzstraße 20, Dresden, 01069, Germany;[ Cao, C] Department of Physics, School of Science, Northwestern Polytechnical University, Youyi Xilu 127, Xi’an, 710072, China;[ Li, R] Key Laboratory of Aerospace Materials and Performance (Ministry of Education), School of Materials Science and Engineering, Beihang University, Beijing, 100191, China;[ Wang, G] Laboratory for Microstructures, Shanghai University, Shanghai, 200444, China;[ Wu, Y] State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing, 100191, China;[ Wan, F] Department of Physics, School of Science, Northwestern Polytechnical University, Youyi Xilu 127, Xi’an, 710072, China;[ Ding, F] Department of Physics, School of Science, Northwestern Polytechnical University, Youyi Xilu 127, Xi’an, 710072, China;[ Shi, Y] Department of Physics, School of Science, Northwestern Polytechnical University, Youyi Xilu 127, Xi’an, 710072, China;[ Bai, X] Department of Physics, School of Science, Northwestern Polytechnical University, Youyi Xilu 127, Xi’an, 710072, China;[ Kaban, I] IFW Dresden, Institute for Complex Materials, Helmholtzstraße 20, Dresden, 01069, Germany, TU Dresden, Institut für Werkstoffwissenschaft, Dresden, 01062, Germany;[ Eckert, J] Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Jahnstraße 12, Leoben, A-8700, Austria, Department Materials Physics, Montanuniversität Leoben, Jahnstraße 12, Leoben, A-8700, Austria

来源:Metals,METALS,2015,Vol.5,Issue.4,2134-2147

WOS被引数:5

资源类型:期刊论文

WOS:000367545100026

25. Relating glass formation to eutectic composition in Cu100-xZrx alloy by molecular dynamics simulation EI SCOPUS SCIE

作者:Meng, L. L.;Wang, L.;Wang, S. H.;Qi, Y.

作者机构:[Meng, L.L] School of Mechanical, Electrical & Information Engineering, Shandong University at Weihai, Weihai, 264209, China;[ Wang, L] School of Mechanical, Electrical & Information Engineering, Shandong University at Weihai, Weihai, 264209, China;[ Wang, S.H] School of Mechanical, Electrical & Information Engineering, Shandong University at Weihai, Weihai, 264209, China;[ Qi, Y] School of Mechanical, Electrical & Information Engineering, Shandong University at Weihai, Weihai, 264209, China

来源:Physics and Chemistry of Liquids,PHYSICS AND CHEMISTRY OF LIQUIDS,2015,Vol.53,Issue.3,348-359

WOS被引数:1

资源类型:期刊论文

WOS:000350368900006

26. 纤维增强复合材料钻削分层的研磨检测

作者:汪海晋;孙杰;李剑峰;李卫东;

作者机构:[汪海晋;孙杰;李剑峰;李卫东]山东大学机械工程学院高效洁净机械制造教育部重点实验室;[汪海晋;孙杰;李剑峰;李卫东]中航工业成都飞机工业(集团)有限责任公司

来源:航空制造技术,Aeronautical Manufacturing Technology,2015,Issue.09,73-76

资源类型:期刊论文

27. S32168在氯离子环境中的应力腐蚀试验研究

作者:周成;刘海滨;褚言会;陈颂英;王瑞岩;

作者机构:[周成;刘海滨;褚言会;陈颂英;王瑞岩]青岛市锅炉压力容器检验所;[周成;刘海滨;褚言会;陈颂英;王瑞岩]山东大学机械工程学院

来源:压力容器,Pressure Vessel Technology,2015,Issue.05,18-23+49

资源类型:期刊论文

28. 基于统计能量法理论的收割机驾驶室噪声分析

作者:任重义;武怀宇;马金奎;陈淑江;纪琳;

作者机构:[任重义;武怀宇;马金奎;陈淑江;纪琳]山东大学机械工程学院

来源:噪声与振动控制,Noise and Vibration Control,2015,Issue.05,202-206

资源类型:期刊论文

29. Temperature evolution and material removal mechanisms in nanosecond-pulsed laser ablation of polycrystalline diamond EI SCOPUS SCIE

作者:Wu, Qi;Wang, Jun;Huang, Chuanzhen;Li, Huaizhong

作者机构:[Wu, Q] School of Mechanical and Manufacturing Engineering, University of New South Wales (UNSW), Sydney, NSW 2052, Australia;[ Wang, J] School of Mechanical and Manufacturing Engineering, University of New South Wales (UNSW), Sydney, NSW 2052, Australia;[ Huang, C] Center for Advanced Jet Engineering Technology, School of Mechanical Engineering, MOE Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Jinan, China;[ Li, H] Griffith School of Engineering, Griffith University (Gold Coast Campus), Southport, QLD, Australia

来源:Proceedings of the Institution of Mechanical Engineers, Part B. Journal of engineering manufacture,PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2015,Vol.229,Issue.8,1357-1372

WOS被引数:1

资源类型:期刊论文

WOS:000360083300008

30. Automated Determination of Stellar Atmospheric Parameters Based on Lick Indices EI SCOPUS

作者:Jingchang Pan;Jie Wang;Xin Tan;Jingjing Yu;Ran An

作者机构:[Pan, J] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, 264209, China;[ Wang, J] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, 264209, China;[ Tan, X] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, 264209, China;[ Yu, J] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, 264209, China;[ An, R] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, 264209, China

来源:Journal of information and computational science,Journal of Information and Computational Science,2015,Vol.12,Issue.14,5339-5345

资源类型:期刊论文

31. High-temperature oxidation behavior of Ni-based superalloys with Nb and Y and the interface characteristics of oxidation scales EI SCOPUS SCIE

作者:Weng, Fei;Yu, Huijun;Chen, Chuanzhong;Wan, Kai

作者机构:[Weng, F] Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jingshi Road 17923, Jinan, Shandong, 250061, China;[ Yu, H] Chuanzhong Chen, Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Shandong University, Jingshi Road 17923, Jinan, Shandong, 250061, China;[ Chen, C] Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jingshi Road 17923, Jinan, Shandong, 250061, China;[ Wan, K] Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jingshi Road 17923, Jinan, Shandong, 250061, China

来源:Surface and Interface Analysis: SIA: An International Journal Devoted to the Development and Application of Techniques for the Analysis of Surfaces, Interfaces and Thin Films,SURFACE AND INTERFACE ANALYSIS,2015,Vol.47,Issue.3,362-370

WOS被引数:6

资源类型:期刊论文

WOS:000349686200010

32. 软PLC开发平台与EtherMAC接口技术研究

作者:孙好春;张承瑞;胡天亮;

作者机构:[孙好春;张承瑞;胡天亮]山东大学机械工程学院;[孙好春;张承瑞;胡天亮]山东大学高效与洁净机械制造教育部重点实验室

来源:组合机床与自动化加工技术,Modular Machine Tool & Automatic Manufacturing Technique,2015,Issue.03,83-85

资源类型:期刊论文

33. Machinability of Hastelloy C-276 using Hot-pressed sintered Ti(C7N3)-based cermet cutting tools EI SCOPUS SCIE

作者:Xu Kaitao; Zou Bin; Huang Chuanzhen; Yao Yang; Zhou Huijun; Liu Zhanqiang

作者机构:[Xu, K] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Zou, B] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Huang, C] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Yao, Y] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Zhou, H] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China;[ Liu, Z] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, 250061, China

来源:中国机械工程学报,CHINESE JOURNAL OF MECHANICAL ENGINEERING,2015,Vol.28,Issue.3,599-606

WOS被引数:2

资源类型:期刊论文

WOS:000354707900019

34. Implementation of a Parallel Algorithm Based on a Spark Cloud Computing Platform EI SCOPUS

作者:Wang Longhui;Wang Yong;Xie Yudong;Fernau Henning

作者机构:[Wang, L] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, 250061, China;[ Wang, Y] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, 250061, China;[ Xie, Y] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, 250061, China

来源:Algorithms,Algorithms,2015,Vol.8,Issue.3,407-414

资源类型:期刊论文

35. 基于CATIA/CAA的航空整体结构件温度变形补偿

作者:路来骁;孙杰;张阁;罗育果;熊青春;

作者机构:[路来骁;孙杰;张阁;罗育果;熊青春]山东大学机械工程学院高效洁净机械制造教育部重点实验室;[路来骁;孙杰;张阁;罗育果;熊青春]中航工业成都飞机工业(集团)有限责任公司数控加工厂

来源:航空制造技术,Aeronautical Manufacturing Technology,2015,Issue.03,21-24+29

资源类型:期刊论文

36. 全心缺血早期阶段室性心律失常仿真研究 SCOPUS SCIE

作者:吕伟刚;黎捷;杨飞;王宽全;

作者机构:[吕伟刚]中国海洋大学教育技术系;[黎捷]燕山大学电气工程学院;[杨飞]山东大学机电与信息工程学院;[王宽全]哈尔滨工业大学计算机科学与技术学院

来源:生物化学与生物物理进展,PROGRESS IN BIOCHEMISTRY AND BIOPHYSICS,2015,Vol.42,Issue.2,189-194

WOS被引数:4

资源类型:期刊论文

WOS:000349651000011

37. 基于迭代更新策略的快速高精度频率估计方法 EI SCOPUS

作者:高志峰[1,2];彭喜元[1];彭宇[1]

作者机构:[高志峰;彭喜元;彭宇]哈尔滨工业大学自动化测试与控制研究所,哈尔滨150080,中国.;[高志峰]山东大学机电与信息工程学院,山东威海264209,中国

来源:振动与冲击,Zhendong yu Chongji/Journal of Vibration and Shock,2015,Vol.34,Issue.14,16-20

资源类型:期刊论文

38. 切削加工表面变质层厚度的图像识别技术 EI CSCD SCOPUS

作者:刘继刚;吕绍瑜;刘战强

作者机构:[刘继刚] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[吕绍瑜] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[刘战强] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:天津大学学报. 自然科学与工程技术版,Tianjin Daxue Xuebao (Ziran Kexue yu Gongcheng Jishu Ban)/Journal of Tianjin University Science and Technology,2015,Vol.48,Issue.6,547-554

资源类型:期刊论文

39. Fabrication and mechanical properties of Si3N4/(W, Ti)C/Co graded nano-composite ceramic tool materials EI SCOPUS SCIE

作者:Tian, Xianhua;Zhao, Jun;Wang, Yintao;Gong, Feng;Qin, Wenzhen;Pan, Helin

作者机构:[Tian, X] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Zhao, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Wang, Y] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Gong, F] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Qin, W] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Pan, H] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China

来源:CERAMICS INTERNATIONAL,CERAMICS INTERNATIONAL,2015,Vol.41,Issue.3,3381-3389

WOS被引数:12

资源类型:期刊论文

WOS:000350188900005

40. Rock breaking performance of a pick assisted by high-pressure water jet under different configuration modes EI SCOPUS SCIE

作者:Liu Songyong; Liu Xiaohui; Chen Junfeng; Lin Mingxing

作者机构:[Liu, S] School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou, 221116, China;[ Liu, X] School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou, 221116, China;[ Chen, J] Research Institute of Zhejiang University, Taizhou, 318000, China;[ Lin, M] School of Mechanical Engineering, Shandong University, Jinan, 250061, China

来源:中国机械工程学报,CHINESE JOURNAL OF MECHANICAL ENGINEERING,2015,Vol.28,Issue.3,607-617

WOS被引数:9

资源类型:期刊论文

WOS:000354707900020

共 8 页, 142 条记录

TOP