按条件检索“142”条记录

已选条件: 数据来源: 万方 × 出版年: 2015 × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
41. Effect of Thickness Ratio on Load-Bearing Capacity of Bilayered Dental Ceramics SCOPUS SCIE

作者:Wang, Gaoqi;Zhang, Song;Bian, Cuirong;Kong, Hui

作者机构:[Wang, G] School of Mechanical Engineering, Shandong University, Key Laboratory of High Efficiency, Clean Mechanical Manufacture (Ministry of Education), Jinan, China;[ Zhang, S] School of Mechanical Engineering, Shandong University, Key Laboratory of High Efficiency, Clean Mechanical Manufacture (Ministry of Education), Jinan, China;[ Bian, C] Department of Prosthodontics, Qilu Hospital of Shandong University, Jinan, China;[ Kong, H] Department of Prosthodontics, Qilu Hospital of Shandong University, Jinan, China

来源:Journal of prosthodontics: official journal of the American College of Prosthodontists,JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY,2015,Vol.24,Issue.1,17-24

WOS被引数:2

资源类型:期刊论文

WOS:000350151700003

42. 未来刀具——微纳织构涂层刀具研究进展

作者:张克栋[1];邓建新[1];姜超[1];陈帅[1];刘亚运[1]

作者机构:[张克栋;邓建新;姜超;陈帅;刘亚运]山东大学机械工程学院,中国

来源:航空制造技术,Aeronautical Manufacturing Gechnology,2015,Issue.06,36-42

资源类型:期刊论文

43. Automated Determination of Stellar Atmospheric Parameters Based on Lick Indices EI SCOPUS

作者:Jingchang Pan;Jie Wang;Xin Tan;Jingjing Yu;Ran An

作者机构:[Pan, J] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, 264209, China;[ Wang, J] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, 264209, China;[ Tan, X] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, 264209, China;[ Yu, J] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, 264209, China;[ An, R] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, 264209, China

来源:Journal of information and computational science,Journal of Information and Computational Science,2015,Vol.12,Issue.14,5339-5345

资源类型:期刊论文

44. Research on thermoplastic starch and different fiber reinforced biomass composites EI SCOPUS SCIE

作者:Wang, Cheng-zhao;Li, Fang-yi;Wang, Li-ming;Li, Jian-feng;Guo, An-fu;Zhang, Chuan-wei;Liu, Peng

作者机构:[Wang, C.-Z] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Li, F.-Y] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Wang, L.-M] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Li, J.-F] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Guo, A.-F] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Zhang, C.-W] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Liu, P] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China

来源:RSC Advances,RSC ADVANCES,2015,Vol.5,Issue.62,49824-49830

WOS被引数:5

资源类型:期刊论文

WOS:000355987900001

45. Review on Stress Corrosion and Corrosion Fatigue Failure of Centrifugal Compressor Impeller EI SCOPUS SCIE

作者:Sun Jiao; Chen Songying; Qu Yanpeng; Li Jianfeng

作者机构:[Sun, J] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Research Center for Sustainable Manufacturing, Shandong University, Jinan, 250061, China;[ Chen, S] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Research Center for Sustainable Manufacturing, Shandong University, Jinan, 250061, China, Key Laboratory of High efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan, 250061, China;[ Qu, Y] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Research Center for Sustainable Manufacturing, Shandong University, Jinan, 250061, China, Key Laboratory of High efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan, 250061, China;[ Li, J] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Research Center for Sustainable Manufacturing, Shandong University, Jinan, 250061, China, Key Laboratory of High efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan, 250061, China

来源:中国机械工程学报,CHINESE JOURNAL OF MECHANICAL ENGINEERING,2015,Vol.28,Issue.2,217-225

WOS被引数:5

资源类型:期刊论文

WOS:000351028200001

46. 基于Trot步态的四足机器人弹簧腿动力学分析与仿真 EI SCOPUS

作者:郑建华;牛军川;江民圣;李蒙;荣学文;

作者机构:[郑建华;牛军川;江民圣;李蒙;荣学文]山东大学机械工程学院;[郑建华;牛军川;江民圣;李蒙;荣学文]山东大学高效洁净机械制造教育部重点实验室;[郑建华;牛军川;江民圣;李蒙;荣学文]山东大学控制科学与工程学院

来源:中南大学学报(自然科学版),Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology),2015,Vol.46,Issue.8,2877-2883

资源类型:期刊论文

47. The effect of viscosity on the cavitation characteristics of high speed sleeve bearing EI SCOPUS SCIE

作者:Wang Li-li; Lu Chang-hou

作者机构:[Wang, L.-L] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, 266590, China;[ Lu, C.-H] School of Mechanical Engineering, Shandong University, Jinan, 250061, China

来源:水动力学研究与进展B辑,JOURNAL OF HYDRODYNAMICS,2015,Vol.27,Issue.3,367-372

WOS被引数:3

资源类型:期刊论文

WOS:000357626300006

48. 制约硅晶片减薄因素研究分析 EI CSCD SCOPUS

作者:刘腾云;葛培琪;高玉飞

作者机构:[刘腾云] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[高玉飞] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[葛培琪] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:人工晶体学报,Rengong Jingti Xuebao/Journal of Synthetic Crystals,2015,Vol.44,Issue.7,1719-1724

资源类型:期刊论文

49. 基于SPH结合FEM的喷丸残余应力数值模拟 CSCD

作者:王利平;王建明;赵莉莉;吕鹤婷;刘兴睿

作者机构:[王利平] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王建明] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[赵莉莉] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[吕鹤婷] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[刘兴睿] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:中国表面工程,China Surface Engineering,2015,Vol.28,Issue.5,71-76

资源类型:期刊论文

50. 剑麻纤维增强热塑性淀粉复合材料的制备及性能研究

作者:张传伟;李方义;刘鹏;王成钊;李剑峰;郭安福;

作者机构:[张传伟;李方义;刘鹏;王成钊;李剑峰;郭安福]山东大学机械工程学院&高效洁净机械制造教育部重点实验室;[张传伟;李方义;刘鹏;王成钊;李剑峰;郭安福]聊城大学机械与汽车工程学院

来源:生物质化学工程,Biomass Chemical Engineering,2015,Issue.06,1-5

资源类型:期刊论文

51. Rock breaking performance of a pick assisted by high-pressure water jet under different configuration modes EI SCOPUS SCIE

作者:Liu Songyong; Liu Xiaohui; Chen Junfeng; Lin Mingxing

作者机构:[Liu, S] School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou, 221116, China;[ Liu, X] School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou, 221116, China;[ Chen, J] Research Institute of Zhejiang University, Taizhou, 318000, China;[ Lin, M] School of Mechanical Engineering, Shandong University, Jinan, 250061, China

来源:中国机械工程学报,CHINESE JOURNAL OF MECHANICAL ENGINEERING,2015,Vol.28,Issue.3,607-617

WOS被引数:9

资源类型:期刊论文

WOS:000354707900020

52. 基于结构优化组合技术的铣床设计

作者:韩玉勇;李玉民;侯成刚;李克志;

作者机构:[韩玉勇;李玉民;侯成刚;李克志]枣庄科技职业学院;[韩玉勇;李玉民;侯成刚;李克志]山东大学机械工程学院;[韩玉勇;李玉民;侯成刚;李克志]滕州市喜力机床有限责任公司

来源:制造技术与机床,2015,Issue.12,87-88+92

资源类型:期刊论文

53. 圆柱壳体基础隔振系统导纳功率流特性 EI CSCD SCOPUS

作者:王晓乐;孙玲玲;高阳;杨明月

作者机构:[王晓乐] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[孙玲玲] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[高阳] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[杨明月] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:机械工程学报,Jixie Gongcheng Xuebao/Journal of Mechanical Engineering,2015,Vol.51,Issue.11,48-55

资源类型:期刊论文

54. 基于Voronoi法和随机法的微纳米复合陶瓷刀具材料微观结构建模 EI CSCD SCOPUS

作者:王东;赵军

作者机构:[王东] 西安工业大学机电工程学院, 西安, 陕西 710021, 中国.;[赵军] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:人工晶体学报,Rengong Jingti Xuebao/Journal of Synthetic Crystals,2015,Vol.44,Issue.10,2918-2923

资源类型:期刊论文

55. 基于用户认知的工程机械产品视觉形象设计研究

作者:陈曦;周以齐;

作者机构:[陈曦;周以齐]山东大学机械工程学院

来源:工程机械,Construction Machinery and Equipment,2015,Issue.01,32-36+7

资源类型:期刊论文

56. 激光粒度分析法在油液监测中的应用 CSCD

作者:朱兆聚;李方义;李国彦;董德浩;王一凡

作者机构:[朱兆聚] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[李方义] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[李国彦] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[董德浩] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[王一凡] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:润滑与密封,Lubrication Engineering,2015,Vol.40,Issue.11

资源类型:期刊论文

57. 软PLC开发平台与EtherMAC接口技术研究

作者:孙好春;张承瑞;胡天亮;

作者机构:[孙好春;张承瑞;胡天亮]山东大学机械工程学院;[孙好春;张承瑞;胡天亮]山东大学高效与洁净机械制造教育部重点实验室

来源:组合机床与自动化加工技术,Modular Machine Tool & Automatic Manufacturing Technique,2015,Issue.03,83-85

资源类型:期刊论文

58. 微膜尺寸与吸附物对微膜生化传感器动态特性的影响 CSCD

作者:李勇

作者机构:[李勇] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:传感器与微系统,Transducer and Microsystem Technology,2015,Vol.34,Issue.8,19-20

资源类型:期刊论文

59. Non-Fourier heat conduction in a thin gold film heated by an ultra-fast-laser EI CSCD SCOPUS SCIE

作者:Mao YuDong; Xu MingTian

作者机构:[Mao, Y.D] Department of Engineering Mechanics, School of Civil Engineering, Shandong University, Jinan, 250061, China, School of Energy and Power Engineering, Shandong University, Jinan, 250061, China;[ Xu, M.T] Department of Engineering Mechanics, School of Civil Engineering, Shandong University, Jinan, 250061, China

来源:中国科学(技术科学)(英文版),SCIENCE CHINA-TECHNOLOGICAL SCIENCES,2015,Vol.58,Issue.4,638-649

WOS被引数:4

资源类型:期刊论文

WOS:000351861900006

60. WC-Co硬质合金刀具材料与钛合金化学匹配性研究

作者:李安海;吴义民;赵军;卢永红;

作者机构:[李安海;吴义民;赵军;卢永红]山东滨州渤海活塞股份有限公司;[李安海;吴义民;赵军;卢永红]山东大学机械工程学院高效洁净机械制造教育部重点实验室

来源:硬质合金,Cemented Carbide,2015,Issue.04,230-233

资源类型:期刊论文

共 8 页, 142 条记录

TOP