按条件检索“27”条记录

已选条件: 机构: 机械工程学院 × 文献类型: articleinpress ×
导出
  • 排序
  • 显示
1. Effect of machining-induced surface integrity on the corrosion behavior of Al–Li alloy 2A97 in sodium chloride solution SCOPUS

作者:Niu J.; Liu Z.; Wang B.; Hua Y.; Wang G.

作者机构:[Niu, J] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan, 250061, China;[ Liu, Z] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan, 250061, China;[ Wang, B] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan, 250061, China;[ Hua, Y] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan, 250061, China;[ Wang, G] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan, 250061, China

来源:Materials and Corrosion,2018

资源类型:期刊论文

2. Effect of wall roughness on performance of microchannel applied in microfluidic device SCOPUS

作者:Jia J.; Song Q.; Liu Z.; Wang B.

作者机构:[Jia, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China;[ Song, Q] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Liu, Z] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Wang, B] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China

来源:Microsystem Technologies,2018

资源类型:期刊论文

3. Machined channel quality and tool life using cermet micro-mill in micro-milling aluminum alloy SCOPUS

作者:Li S.S.; Zou B.; Xu K.; YishunWang

作者机构:[Li, S.S] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, 17923 Jing Shi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Shandong, China, Shandong Special Equipment Inspection Institute Co., Ltd., Shandong, China;[ Zou, B] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, 17923 Jing Shi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Shandong, China;[ Xu, K] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, 17923 Jing Shi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Shandong, China;[ YishunWang] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, 17923 Jing Shi Road, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Shandong, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

4. A study on corrosion behaviors of laser cladded Fe−Cr−Ni coating in as-cladded and machined conditions SCOPUS

作者:Zhang P.; Liu Z.; Su G.; Du J.; Zhang J.

作者机构:[Zhang, P] School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, 250353, China, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Liu, Z] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan, 250061, China;[ Su, G] School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, 250353, China;[ Du, J] School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, 250353, China;[ Zhang, J] School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, 250353, China

来源:Materials and Corrosion,2018

资源类型:期刊论文

5. Meshfree analysis on dynamic behavior of hard brittle material in abrasive flow machining SCOPUS

作者:Lv Z.; Hou R.; Huang C.; Zhu H.; Qi H.

作者机构:[Lv, Z] School of Mechanical Engineering, Shandong University of Technology, Zibo, 255000, China;[ Hou, R] School of Mechanical Engineering, Shandong University of Technology, Zibo, 255000, China;[ Huang, C] Center for Advanced Jet Engineering Technologies (CaJET), Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Zhu, H] Center for Advanced Jet Engineering Technologies (CaJET), Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Qi, H] Key Laboratory of Special Purpose Equipment and Advanced Processing Technology (Ministry of Education), Zhejiang University of Technology, Hangzhou, 310014, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

6. Simulation and optimization of overlapped iteration process with multi-coupled activities based on value analysis SCOPUS

作者:Yin F.; Gao Q.; Ji X.

作者机构:[Yin, F] School of Mechanical Engineering, Shandong University, Jinan, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, China;[ Gao, Q] School of Mechanical Engineering, Shandong University, Jinan, China;[ Ji, X] School of Mechanical Engineering, Shandong University, Jinan, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, China

来源:Concurrent Engineering Research and Applications,2018

资源类型:期刊论文

7. Modeling and analysis of force prediction in milling process of unidirectional fiber reinforced polymer composites SCOPUS

作者:Wang H.; Dong H.; Ke Y.; Sun J.

作者机构:[Wang, H] The State Key Lab of Fluid Power Transmission and Control, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310027, China;[ Dong, H] The State Key Lab of Fluid Power Transmission and Control, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310027, China;[ Ke, Y] The State Key Lab of Fluid Power Transmission and Control, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310027, China;[ Sun, J] School of Mechanical Engineering, Shandong University, Ji’nan, 250061, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

8. Composite Learning Robot Control with Friction Compensation: A Neural Network-Based Approach SCOPUS

作者:Guo K.; Pan Y.; Yu H.

作者机构:[Guo, K] Mechanical Engineering, Shandong University, 12589 Jinan, Shandong China 250061 (e-mail: kaiguo@sdu.edu.cn);[ Pan, Y] Department of Biomedical Engineering, National Universisy of Singapore, Singapore Singapore 117575 (e-mail: yongppan@gmail.com);[ Yu, H] Biomedical Engineering, National University of Singapore, Singapore (e-mail: bieyhy@nus.edu.sg)

来源:IEEE Transactions on Industrial Electronics,2018

资源类型:期刊论文

9. Size-dependent responses of micro-end mill based on strain gradient elasticity theory SCOPUS

作者:Du Y.; Song Q.; Liu Z.; Wang B.; Wan Y.

作者机构:[Du, Y] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China;[ Song, Q] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Liu, Z] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Wang, B] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China;[ Wan, Y] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

10. Graph-Based Change Detection for Condition Monitoring of Rotating Machines: Techniques for Graph Similarity SCOPUS

作者:Wang T.; Lu G.; Liu J.; Yan P.

作者机构:[Wang, T] Key Laboratory of High-Efficiency and Clean Mechanical Manufacture of MOE, National Demonstration Center for Experimental Mechanical Engineering Education, School of Mechanical Engineering, Shandong University, Jinan 250061, China (e-mail: wangtengsdu@gmail.com)., China;[ Lu, G] Key Laboratory of High-Efficiency and Clean Mechanical Manufacture of MOE, National Demonstration Center for Experimental Mechanical Engineering Education, School of Mechanical Engineering, Shandong University, Jinan 250061, China (e-mail: luguoliang@sdu.edu.cn)., China;[ Liu, J] Department of Mechanical and Aerospace Engineering, Carleton University, Ottawa, ON K1S 5B6, Canada (e-mail: Jie.Liu@carleton.ca)., Canada;[ Yan, P] Key Laboratory of High-Efficiency and Clean Mechanical Manufacture of MOE, National Demonstration Center for Experimental Mechanical Engineering Education, School of Mechanical Engineering, Shandong University, Jinan 250061, China (e-mail: yanpeng@sdu.edu.cn)., China

来源:IEEE Transactions on Reliability,2018

资源类型:期刊论文

11. A simulation model for predicting surface integrity coupled thermal–mechanical effect in turning of Inconel 718 super alloy SCOPUS

作者:Ren X.; Liu Z.

作者机构:[Ren, X] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, China;[ Liu, Z] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

12. Characterizing the effect of process variables on energy consumption in end milling SCOPUS

作者:Zhou L.; Li F.; Zhao F.; Li J.; Sutherland J.W.

作者机构:[Zhou, L] Key Laboratory of High Efficiency and Clean Mechanical Manufacture Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Li, F] Key Laboratory of High Efficiency and Clean Mechanical Manufacture Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Zhao, F] Environmental and Ecological Engineering, Purdue University, West Lafayette, IN 47907, United States;[ Li, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Sutherland, J.W] Environmental and Ecological Engineering, Purdue University, West Lafayette, IN 47907, United States

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

13. High-speed intermittent turning of GH2132 alloy with Si3N4/(W, Ti)C/Co graded ceramic tool SCOPUS

作者:Tian X.; Zhao J.; Yang H.; Wang Z.; Liu H.

作者机构:[Tian, X] School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou, 221116, China, Jiangsu Key Laboratory of Mine Mechanical and Electrical Equipment, China University of Mining and Technology, Xuzhou, 221116, China;[ Zhao, J] School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Yang, H] School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou, 221116, China, Jiangsu Key Laboratory of Mine Mechanical and Electrical Equipment, China University of Mining and Technology, Xuzhou, 221116, China;[ Wang, Z] School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou, 221116, China, Jiangsu Key Laboratory of Mine Mechanical and Electrical Equipment, China University of Mining and Technology, Xuzhou, 221116, China;[ Liu, H] School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou, 221116, China, Jiangsu Key Laboratory of Mine Mechanical and Electrical Equipment, China University of Mining and Technology, Xuzhou, 221116, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

14. Stability of turning process with a distributed cutting force model SCOPUS

作者:Wu Y.; Song Q.; Liu Z.; Wang B.

作者机构:[Wu, Y] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China;[ Song, Q] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Liu, Z] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Wang, B] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

15. Influence of surface functional parameters on friction behavior and elastic–plastic deformation of grinding surface in mixed lubrication state SCOPUS

作者:Zhao B.; Zhang S.; Li J.

作者机构:[Zhao, B] School of Mechanical Engineering, Shandong University, Jinan, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, China;[ Zhang, S] School of Mechanical Engineering, Shandong University, Jinan, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, China;[ Li, J] School of Mechanical Engineering, Shandong University, Jinan, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, China

来源:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology,2018

资源类型:期刊论文

16. Research on cavitation involved in ultrasonic-assisted abrasive waterjet machining SCOPUS

作者:Lv Z.; Hou R.; Wang T.; Huang C.; Zhu H.

作者机构:[Lv, Z] School of Mechanical Engineering, Shandong University of Technology, Zibo, 255000, China;[ Hou, R] School of Mechanical Engineering, Shandong University of Technology, Zibo, 255000, China;[ Wang, T] School of Mechanical Engineering, Shandong University of Technology, Zibo, 255000, China;[ Huang, C] Center for Advanced Jet Engineering Technologies (CaJET), Key Laboratory of High-Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Zhu, H] Center for Advanced Jet Engineering Technologies (CaJET), Key Laboratory of High-Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan, 250061, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

17. Characteristics of machined surface integrity in face milling Al-Li alloy 2A97 with carbide inserts SCOPUS

作者:Niu J.; Liu Z.; Ai X.; Huang W.; Wang G.; Duan R.

作者机构:[Niu, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;[ Liu, Z] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;[ Ai, X] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;[ Huang, W] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;[ Wang, G] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;[ Duan, R] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

18. A novel algorithm for tool wear online inspection based on machine vision SCOPUS

作者:Hou Q.; Sun J.; Huang P.

作者机构:[Hou, Q] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of Ministry of Education, Shandong University, Jinan, 250061, China;[ Sun, J] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of Ministry of Education, Shandong University, Jinan, 250061, China;[ Huang, P] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of Ministry of Education, Shandong University, Jinan, 250061, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

19. High-speed vibration-assisted electro-arc machining SCOPUS

作者:Zhu G.; Zhang M.; Zhang Q.; Wang K.

作者机构:[Zhu, G] Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, No. 17923, Jingshi Road, Jinan City, 250061, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Zhang, M] School of Mechanical Engineering, Nanjing Institute of Technology, Nanjing, China;[ Zhang, Q] Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, No. 17923, Jingshi Road, Jinan City, 250061, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China;[ Wang, K] Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, No. 17923, Jingshi Road, Jinan City, 250061, China, National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China

来源:International Journal of Advanced Manufacturing Technology,2018

资源类型:期刊论文

20. Recognizing Human Actions in Low-Resolution Videos: An Approach Based on the Dempster-Shafer Theory SCOPUS

作者:Gao Z.; Lu G.; Yan P.

作者机构:[Gao, Z] Key Laboratory of High-efficiency and Clean Mechanical Manufacture of MOE, National Demonstration Center for Experimental Mechanical Engineering Education, School of Mechanical Engineering, Shandong University, Jinan, China, State Key Laboratory of Digital Multimedia Technology, Hisense Company Limited, Qingdao, China;[ Lu, G] Key Laboratory of High-efficiency and Clean Mechanical Manufacture of MOE, National Demonstration Center for Experimental Mechanical Engineering Education, School of Mechanical Engineering, Shandong University, Jinan, China;[ Yan, P] Key Laboratory of High-efficiency and Clean Mechanical Manufacture of MOE, National Demonstration Center for Experimental Mechanical Engineering Education, School of Mechanical Engineering, Shandong University, Jinan, China

来源:International Journal of Pattern Recognition and Artificial Intelligence,2018

资源类型:期刊论文

共 2 页, 27 条记录

TOP