按条件检索“483”条记录

已选条件: 出版年: 2011 × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
1. Design of Virtual Instrumention for high speed data acquisition based on PCL-818HG EI

作者:Li, Yunlei ;Jiang, Lingbo

作者机构:[Li, Yunlei ] School of Mechanical Engineering, Shandong University of Technology, Zibo, China;[Jiang, Lingbo ] Department of Electrical and Mechanical Engineering, Shandong Vocational College of Industry, Zibo, China

来源:2011 International Conference on Electric Information and Control Engineering, ICEICE 2011 - Proceedings,20114913-4915

资源类型:会议论文

2. Al_2O_3基纳米复合陶瓷刀具切削不锈钢的实验研究 CSCD

作者:刘含莲;黄传真;朱洪涛;邹斌

作者机构:[刘含莲] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[黄传真] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[朱洪涛] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[邹斌] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:制造技术与机床,Manufacturing Technology & Machine Tool,2011,Issue.1,30-32

资源类型:期刊论文

3. CUTTING PERFORMANCE AND WEAR MECHANISM OF Si_3N_4-BASED NANOCOMPOSITE CERAMIC CUTTING TOOL IN MACHINING OF CAST IRON EI SCOPUS SCIE

作者:Bin Zou;Chuanzhen Huang;Jinpeng Song;Hanlian Liu;Hongtao Zhu

作者机构:[Zou, B] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, China;[ Huang, C] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, China;[ Song, J] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, China;[ Liu, H] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, China;[ Zhu, H] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, China

来源:Machining Science and Technology,MACHINING SCIENCE AND TECHNOLOGY,2011,Vol.15,Issue.2,192-205

WOS被引数:3

资源类型:期刊论文

WOS:000291273100003

4. Pull-in Instability Analysis of Electrostatically Actuated Microplate with Rectangular Shape SCOPUS SCIE

作者:Wang, Binglei; Zhou, Shenjie; Zhao, Junfeng; Chen, Xi

作者机构:[Zhou, Shenjie; Zhao, Junfeng] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Wang, Binglei; Zhao, Junfeng] Shandong Univ, Sch Civil Engn, Jinan 250061, Shandong, Peoples R China.; [Wang, Binglei; Chen, Xi] Columbia Univ, Dept Earth & Environm Engn, New York, NY 10027 USA.; [Chen, Xi] Xi An Jiao Tong Univ, Sch Aerosp, Xian 710049, Peoples R China.; [Chen, Xi] Hanyang Univ, Dept Civil & Environm Engn, Seoul 133791, South Korea.

来源:INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING,2011,Vol.12,Issue.6,1085-1094

WOS被引数:25

资源类型:期刊论文

WOS:000297579800020

5. 计算智能技术在陶瓷材料优化设计中的应用

作者:张会发;许崇海;张静婕;王兴海;方斌;

作者机构:[张会发;许崇海;张静婕;王兴海;方斌]山东轻工业学院机械工程学院制造技术与新材料研究中心;[张会发;许崇海;张静婕;王兴海;方斌]山东大学机械工程学院;[张会发;许崇海;张静婕;王兴海;方斌]山东轻工业学院材料科学与工程学院

来源:材料导报,2011,Issue.S1,235-238+272

资源类型:期刊论文

6. Efficient algorithm getting intersection curves for triangular Bézier surface EI

作者:Sun, Dianzhu ;Kang, Xincai ;Li, Yanrui ;Liu, Jian

作者机构:[Sun, Dianzhu ;Kang, Xincai ;Li, Yanrui ;Liu, Jian ] School of Mechanical Engineering, Shandong University of Technology, Zibo 255091, China

来源:Jixie Gongcheng Xuebao/Journal of Mechanical Engineering,2011,Vol.47,Issue.3,89-94

资源类型:期刊论文

7. Sialon-Si_3N_4系梯度纳米复合陶瓷刀具材料的设计及制备 EI CSCD SCOPUS

作者:郑光明;赵军;周咏辉;高中军

作者机构:[郑光明] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[赵军] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[周咏辉] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[高中军] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:硅酸盐学报,Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society,2011,Vol.39,Issue.5,783-788

资源类型:期刊论文

8. 四斜叶穿流式搅拌器固液悬浮特性数值模拟

作者:陈建国;栾德玉;周慎杰;陈颂英;

作者机构:[陈建国;栾德玉;周慎杰;陈颂英]青岛科技大学机电工程学院;[陈建国;栾德玉;周慎杰;陈颂英]山东大学机械工程学院

来源:石油化工设备,Petro-Chemical Equipment,2011,Issue.06,29-34

资源类型:期刊论文

9. 高效切削铁基高温合金刀具磨损特性研究

作者:张宗阳;艾兴;刘战强;王珉;

作者机构:[张宗阳;艾兴;刘战强;王珉]山东大学机械工程学院高效洁净机械制造教育部重点实验室

来源:制造业自动化,2011,Issue.21,48-52

资源类型:期刊论文

10. Al_2O_3/TiC基陶瓷刀具材料的高温摩擦磨损性能研究 EI CSCD SCOPUS

作者:张辉;邓建新;吴泽;艾兴;赵军

作者机构:[张辉] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[邓建新] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[吴泽] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[艾兴] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[赵军] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:摩擦学学报,Mocaxue Xuebao/Tribology,2011,Vol.31,Issue.4,369-374

资源类型:期刊论文

11. Nonlinear control of magnetic jiggle stage based on differential geometry method EI

作者:Zhang, Yi ;Ma, Shu-Yuan ;Sun, Hui-Zhi ;Wang, Wei-Ming

作者机构:[Zhang, Yi ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266510, China;[Sun, Hui-Zhi ] Automobile Department, Shandong Transport Vocational College, Weifang 261206, China;[Ma, Shu-Yuan ;Wang, Wei-Ming ] School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing 100081, China

来源:Nami Jishu yu Jingmi Gongcheng/Nanotechnology and Precision Engineering,2011,Vol.9,Issue.3,244-248

资源类型:期刊论文

12. 多层包扎尿素合成塔开裂环境分析

作者:宋明大;曹怀祥;王春茂;袁涛;王威强;

作者机构:[宋明大;曹怀祥;王春茂;袁涛;王威强]山东省特种设备检验研究院;[宋明大;曹怀祥;王春茂;袁涛;王威强]山东大学机械工程学院

来源:中国特种设备安全,2011,Issue.07,43-46

资源类型:期刊论文

13. Theoretical research on a six-axis accelerometer for humanoid robot wrist EI

作者:Yu, Chunzhan ;Zhang, Xinyi ;Jia, Qingxuan ;Han, Jinhong ;Liu, Jianping

作者机构:[Yu, Chunzhan ;Jia, Qingxuan ;Liu, Jianping ] School of Automation, Beijing University of Posts and Telecommunications, Beijing 100876, China;[Yu, Chunzhan ;Liu, Jianping ] School of Agricultural and Food Engineering, Shandong University of Technology, Zibo 255049, China;[Zhang, Xinyi ;Han, Jinhong ] School of Mechanical Engineering, Shandong University of Technology, Zibo 255049, China

来源:Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument,2011,Vol.32,Issue.8,1903-1909

资源类型:期刊论文

14. Algorithm for generating rough tool-path based on triangular Bézier surface EI

作者:Sun, Dianzhu ;Kang, Xincai ;Li, Yanrui ;Sun, Yongwei

作者机构:[Sun, Dianzhu ;Kang, Xincai ;Li, Yanrui ;Sun, Yongwei ] School of Mechanical Engineering, Shandong University of Technology, Zibo, Shandong 255091, China

来源:Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University,2011,Vol.45,Issue.3,70-74

资源类型:期刊论文

15. Improvements of intergranular corrosion resistance and mechanical properties of brass H68 EI

作者:Jiang, Ying ;Wang, Wei-Guo ;Guo, Hong

作者机构:[Jiang, Ying ;Wang, Wei-Guo ;Guo, Hong ] School of Mechanical Engineering, Shandong University of Technology, Zibo 255049, China

来源:Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals,2011,Vol.21,Issue.2,377-383

资源类型:期刊论文

16. Technical optimization of the extraction of andrographolide by supercritical CO2 EI

作者:Chen, Kexun ;Yin, Wenhong ;Zhang, Wencheng ;Pan, Jian

作者机构:[Chen, Kexun ] College of Chemical Engineering, Shandong University of Technology, 12 Zhangzhou Road, Zibo 255049, Shandong, China;[Zhang, Wencheng ;Pan, Jian ] Key Laboratory of Bio-Chemical Technology for Farm Products, Ministry of Education, Hefei University of Technology, Hefei 230069, Anhui, China;[Yin, Wenhong ] School of Mechanical Engineering, Shandong University of Technology, 12 Zhangzhou Road, Zibo 255049, Shandong, China

来源:Food and Bioproducts Processing,2011,Vol.89,Issue.2,92-97

资源类型:期刊论文

17. Dynamic behaviors of rigid-flexible coupling for novel 4-UPS-UPU parallel coordinate measuring machine EI

作者:Chen, Xiu-Long ;Jia, Shuai-Shuai ;Deng, Yu ;Zhao, Yong-Sheng

作者机构:[Chen, Xiu-Long ;Jia, Shuai-Shuai ;Deng, Yu ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266510, China;[Zhao, Yong-Sheng ] College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China

来源:Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition),2011,Vol.41,Issue.4,1020-1024

资源类型:期刊论文

18. 活塞生产线中人因素评估及量化方法研究 CSCD

作者:李普红;周军;邓建新;范志君

作者机构:[李普红] 山东大学机械工程学院, 山东大学高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[周军] 山东大学机械工程学院, 山东大学高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[范志君] 山东大学机械工程学院, 山东大学高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[邓建新] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:制造技术与机床,Manufacturing Technology & Machine Tool,2011,Issue.7,37-44

资源类型:期刊论文

19. Investigation of ultrasonic electroplating Ni-P coatings on NdFeB permanent magnet EI

作者:Li, Li ;Wang, Fei-Fei ;Niu, Zong-Wei

作者机构:[Li, Li ;Wang, Fei-Fei ;Niu, Zong-Wei ] School of Mechanical Engineering, Shandong University of Technology, Zibo 255049, China

来源:Gongneng Cailiao/Journal of Functional Materials,2011,Vol.42,Issue.11,2047-2049

资源类型:期刊论文

20. The study of requirement forecasting and decision-making methodology of equipment\'s maintenance spares-parts EI

作者:Li, Shu-Guang ;Zhao, Yan-Jun ;Xu, Cheng

作者机构:[Li, Shu-Guang ;Xu, Cheng ] School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China;[Zhao, Yan-Jun ] School of Mechanical Engineering, Shandong University of Technology, Zibo 255000, Shandong, China;[Li, Shu-Guang ] Institute of Chemical Defense, Beijing 102205, China

来源:Binggong Xuebao/Acta Armamentarii,2011,Vol.32,Issue.7,901-905

资源类型:期刊论文

共 25 页, 483 条记录

TOP