按条件检索“609”条记录

已选条件: 出版年: 2018 × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
1. Numerical Investigation on the Features of Gasoline Mixture Flow Field with Rotary Jet Mixing

作者:Songying Chen;Longhao Xiang;Yanpeng Qu;

作者机构:[Songying Chen;Longhao Xiang;Yanpeng Qu]Key Laboratory of High-Efficiency and Clean Mechanical Manufacture,National Demonstration Center for Experimental Mechanical Engineering Education,School of Mechanical Engineering,Shandong University

来源:Journal of Beijing Institute of Technology,2018,Issue.03,399-405

资源类型:期刊论文

2. Curve fitting based efficient parameter selection for robust provable data possession EI SCIE

作者:Liu, Meng; Zhang, Xuyun; Yang, Chi; He, Qiang; Zhang, Jianbing

作者机构:[Liu, Meng] Shandong Univ, Sch Mech Elect & Informat Engn, Weihai, Peoples R China.; [Zhang, Xuyun] Univ Auckland, Dept Elect & Comp Engn, Auckland, New Zealand.; [Yang, Chi] Univ Wollongong, Sch Comp & Informat Technol, Wollongong, NSW, Australia.; [He, Qiang] Swinburne Univ Technol, Sch Software & Elect Engn, Hawthorn, Vic, Australia.; [Zhang, Jianbing] Nanjing Univ, State Key Lab Novel Software Technol, Nanjing, Jiangsu, Peoples R China.

来源:JOURNAL OF PARALLEL AND DISTRIBUTED COMPUTING,2018,Vol.120,62-76

资源类型:期刊论文

WOS:000442193100006

3. A modified finite volume method for convection-diffusion-reaction problems EI SCOPUS SCIE

作者:Xu, Mingtian

作者机构:[Xu, Mingtian] Shandong Univ, Sch Civil Engn, Dept Engn Mech, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2018,Vol.117,658-668

资源类型:期刊论文

WOS:000417963300059

4. Analysis of Unstable Hydrofoil Energy-Capturing Motion Due to Energy Dissipation SCOPUS SCIE

作者:Xie, Yudong; Chen, Chen; Wang, Yong; Ma, Penglei; Lu, Jianwei

作者机构:[Xie, Yudong; Chen, Chen; Wang, Yong; Ma, Penglei; Lu, Jianwei] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Xie, Yudong; Chen, Chen; Wang, Yong; Ma, Penglei; Lu, Jianwei] Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.

来源:POLISH JOURNAL OF ENVIRONMENTAL STUDIES,2018,Vol.27,Issue.5,2315-2324

资源类型:期刊论文

WOS:000434059500041

5. Identification and compensation of friction for a novel two-axis differential micro-feed system SCOPUS SCIE

作者:Du, Fuxin; Zhang, Mingyang; Wang, Zhaoguo; Yu, Chen; Feng, Xianying; Li, Peigang

作者机构:[Feng, Xianying; Li, Peigang] Shandong Univ, Sch Mech Engn, 17923 Jingshi Rd, Jinan 250061, Shandong, Peoples R China.; Shandong Univ, Key Lab High Efficiency & Clean Mech Mfg, Minist Educ, Jinan 250061, Shandong, Peoples R China.

来源:MECHANICAL SYSTEMS AND SIGNAL PROCESSING,2018,Vol.106,453-465

资源类型:期刊论文

WOS:000426229100028

6. Savonius式水轮机水动力学性能 EI CSCD SCOPUS

作者:边佩翔;杨志宏;王勇;马鹏磊;王诗雅

作者机构:[边佩翔] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[杨志宏] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[王勇] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[马鹏磊] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[王诗雅] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:浙江大学学报. 工学版,Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science),2018,Vol.52,Issue.2,268-272

资源类型:期刊论文

7. 基于响应曲面法的板料渐进成形最大减薄率预测与分析

作者:李燕乐;陈晓晓;翟维东;孙杰;李剑峰

作者机构:[李燕乐;陈晓晓;翟维东;孙杰;李剑峰](1.山东大学机械工程学院.;[李燕乐;陈晓晓;翟维东;孙杰;李剑峰]山东大学高效洁净教育部重点实验室.;[李燕乐;陈晓晓;翟维东;孙杰;李剑峰]机械

来源:吉林大学学报(工学版),20181-6

资源类型:期刊论文

8. Design of wet ultrasonic-mechanical plating equipment for mining machines EI

作者:Zongwei, Niu ;Li, Li ;Zhiyong, Li ;Guangming, Zheng

作者机构:[Zongwei, Niu ;Li, Li ;Zhiyong, Li ;Guangming, Zheng ] School of Mechanical Engineering, Shandong University of Technology, Zibo; 255049, China

来源:IPPTA: Quarterly Journal of Indian Pulp and Paper Technical Association,2018,Vol.30,Issue.4,580-584

资源类型:期刊论文

9. Investigation on critical crack-free cutting depth for single crystal silicon slicing with fixed abrasive wire saw based on the scratching machining experiments EI SCOPUS SCIE

作者:Ge, Mengran; Zhu, Hongtao; Huang, Chuanzhen; Liu, Ao; Bi, Wenbo

作者机构:[Ge, Mengran; Zhu, Hongtao; Huang, Chuanzhen; Liu, Ao; Bi, Wenbo] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING,2018,Vol.74,261-266

资源类型:期刊论文

WOS:000415924400037

10. Effects of time-varying freestream velocity on energy harvesting using an oscillating foil EI SCOPUS SCIE

作者:Ma, Penglei; Wang, Yong; Xie, Yudong; Huo, Zhipu

作者机构:[Ma, Penglei; Wang, Yong; Xie, Yudong; Huo, Zhipu] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:OCEAN ENGINEERING,2018,Vol.153,353-362

资源类型:期刊论文

WOS:000428824200030

11. 钢体PDC钻头的数控铣削工艺及工时估算建模

作者:田京燕;张忠阁;王兆辉;

作者机构:[田京燕;张忠阁;王兆辉]胜利石油管理局钻井工艺研究院;[田京燕;张忠阁;王兆辉]山东大学机械工程学院机械工程国家级实验教学示范中心

来源:机械工程师,Mechanical Engineer,2018,Issue.06,33-36

资源类型:期刊论文

12. 超声振动对软组织穿刺过程中摩擦力的影响

作者:魏鹏鹏;张勤河;谭磊;徐英强;张洪才;

作者机构:[魏鹏鹏;张勤河;谭磊;徐英强;张洪才]山东大学机械工程学院;[魏鹏鹏;张勤河;谭磊;徐英强;张洪才]山东大学机械工程学院高效洁净机械制造教育部重点实验室

来源:中国组织工程研究,Chinese Journal of Tissue Engineering Research,2018,Issue.24,3818-3823

资源类型:期刊论文

13. Efficient semi-analytical methods for the vibration response of and acoustic radiation from a periodical orthogonally rib-stiffened plate EI

作者:Zhou, Haian ;Wang, Xiaoming ;Wu, Huayong ;Meng, Jianbing ;Li, Lijun

作者机构:[Zhou, Haian ;Meng, Jianbing ] School of Mechanical Engineering, Shandong University of Technology, Zibo; 255049, China;[Wu, Huayong ] School of Aeronautics, Shandong Jiaotong University, Jinan; 250357, China;[Wang, Xiaoming ] School of Mechanical Engineering, Dalian University of Technology, Dalian; 116024, China;[Li, Lijun ] School of Transportation and Vehicle Engineering, Shandong University of Technology, Zibo; 255049, China

来源:Shengxue Xuebao/Acta Acustica,2018,Vol.43,Issue.2,224-238

资源类型:期刊论文

14. Effect of molybdenum on the wear properties of (Ti,Mo)C-TiB2-MO2B particles reinforced Fe-based laser cladding composite coatings EI

作者:Zhang, M. ;Luo, S.X. ;Liu, S.S. ;Wang, X.H.

作者机构:[Zhang, M. ] School of Mechanical Engineering, Shandong University, Jinan; 250061, China;[Luo, S.X. ;Liu, S.S. ;Wang, X.H. ] School of Materials Science and Engineering, Shandong University, Jinan; 250061, China

来源:Journal of Tribology,2018,Vol.140,Issue.5

资源类型:期刊论文

15. 水翼振荡运动捕获潮流能的机理研究 EI CSCD SCOPUS

作者:谢玉东;王勇;马鹏磊;逯建伟

作者机构:[谢玉东] 山东大学机械工程学院;;山东大学, ;;高效洁净机械制造教育部重点实验室, 济南;;济南, 山东;;山东 250061;;250061, 中国.;[王勇] 山东大学机械工程学院;;山东大学, ;;高效洁净机械制造教育部重点实验室, 济南;;济南, 山东;;山东 250061;;250061, 中国.;[马鹏磊] 山东大学机械工程学院;;山东大学, ;;高效洁净机械制造教育部重点实验室, 济南;;济南, 山东;;山东 250061;;250061, 中国.;[逯建伟] 山东大学机械工程学院;;山东大学, ;;高效洁净机械制造教育部重点实验室, 济南;;济南, 山东;;山东 250061;;250061, 中国

来源:浙江大学学报. 工学版,Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science),2018,Vol.52,Issue.1,65-72

资源类型:期刊论文

16. Analysis of vortex breakdown in an enclosed cylinder based on the energy gradient theory EI SCOPUS SCIE

作者:Xiao, Meina; Dou, Hua-Shu; Wu, Chuanyu; Zhu, Zuchao; Zhao, Xifeng; Chen, Songying; Chen, Hongli; Wei, Yikun

作者机构:[Xiao, Meina; Dou, Hua-Shu; Wu, Chuanyu; Zhu, Zuchao; Chen, Hongli; Wei, Yikun] Zhejiang Sci Tech Univ, Fac Mech Engn & Automat, Hangzhou 310018, Zhejiang, Peoples R China.; [Xiao, Meina; Zhao, Xifeng] Hisense Shandong Air Conditioner Co Ltd, Hisense Air Conditioner R&D Ctr, Qingdao 266061, Shandong, Peoples R China.; [Xiao, Meina; Chen, Songying] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Natl Demonstrat Ctr Expt Mech Engn Educ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:EUROPEAN JOURNAL OF MECHANICS B-FLUIDS,2018,Vol.71,66-76

资源类型:期刊论文

WOS:000435051900006

17. Uncertainty analysis of dynamic thermal rating based on environmental parameter estimation EI SCIE

作者:Wang, Yanling; Ta, Weihua; Yan, Zhijie; Wei, Ran

作者机构:[Wang, Yanling; Yan, Zhijie] Shandong Univ, Sch Mech Elect & Informat Engn, Weihai, Peoples R China.; [Ta, Weihua] Beaulieu Yarns Weihai Co Ltd, Weihai, Peoples R China.; [Wei, Ran] Shandong Inspur Software Co Ltd, Jinan, Shandong, Peoples R China.

来源:EURASIP JOURNAL ON WIRELESS COMMUNICATIONS AND NETWORKING,2018,Vol.2018,Issue.1

资源类型:期刊论文

WOS:000447868500001

18. 基于产品生命周期的质量数据分析与数据挖掘

作者:高建荣;高琦;高菲;

作者机构:[高建荣;高琦;高菲]山东大学高效清洁机械制造教育部重点实验室;[高建荣;高琦;高菲]山东大学机械工程学院

来源:智能制造,IM(Intelligent Manufacturing),2018,Issue.01,55-59

资源类型:期刊论文

19. 超声振动对渐进成形过程成形力的影响 CSCD

作者:翟维东; 陈晓晓; 李燕乐; 孙玲玲; 李剑峰; 赵国群

作者机构:[翟维东]山东大学机械工程学院;;机械工程国家级实验教学示范中心(山东大学), 高效洁净机械制造教育部重点实验室;;, 济南;;济南, 山东;;山东 250061;;250061, 中国;[陈晓晓]山东大学机械工程学院;;机械工程国家级实验教学示范中心(山东大学), 高效洁净机械制造教育部重点实验室;;, 济南;;济南, 山东;;山东 250061;;250061, 中国;[李燕乐]山东大学机械工程学院;;机械工程国家级实验教学示范中心(山东大学), 高效洁净机械制造教育部重点实验室;;, 济南;;济南, 山东;;山东 250061;;250061, 中国;[孙玲玲]山东大学机械工程学院;;机械工程国家级实验教学示范中心(山东大学), 高效洁净机械制造教育部重点实验室;;, 济南;;济南, 山东;;山东 250061;;250061, 中国;[李剑峰]山东大学机械工程学院;;机械工程国家级实验教学示范中心(山东大学), 高效洁净机械制造教育部重点实验室;;, 济南;;济南, 山东;;山东 250061;;250061, 中国;[赵国群]山东大学材料科学与工程学院, 济南, 山东 250061, 中国.

来源:锻压技术,Forging & Stamping Technolog,2018,Vol.43,Issue.8,80-84+102

资源类型:期刊论文

20. Al2O3-coated h-BN composite powders and as-prepared Si3N4-based self-lubricating ceramic cutting tool material EI

作者:Zhang, Wenliang ;Yi, Mingdong ;Xiao, Guangchun ;Ma, Jun ;Wu, Guangyong ;Xu, Chonghai

作者机构:[Zhang, Wenliang ;Yi, Mingdong ;Xiao, Guangchun ;Ma, Jun ;Wu, Guangyong ;Xu, Chonghai ] School of Mechanical and Automotive Engineering, Qilu University of Technology, Jinan; 250353, China;[Wu, Guangyong ;Xu, Chonghai ] School of Mechanical Engineering, Shandong University, Jinan; 250061, China;[Zhang, Wenliang ;Yi, Mingdong ;Xiao, Guangchun ;Ma, Jun ;Wu, Guangyong ;Xu, Chonghai ] Key Laboratory of Advanced Manufacturing and Measurement and Control Technology for Light Industry in Universities of Shandong, Qilu University of Technology, Jinan; 250353, China

来源:International Journal of Refractory Metals and Hard Materials,2018,Vol.71,1-7

资源类型:期刊论文

共 31 页, 609 条记录

TOP