按条件检索“609”条记录

已选条件: 出版年: 2018 × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
21. Method for output displacement solving of compliant micro-motion mechanism with multi-input forces EI

作者:Gong, Jinliang ;Jia, Guopeng ;Zhang, Yanfei

作者机构:[Gong, Jinliang ;Jia, Guopeng ;Zhang, Yanfei ] School of Mechanical Engineering, Shandong University of Technology, Zibo; 255049, China

来源:Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics,2018,Vol.44,Issue.3,429-436

资源类型:期刊论文

22. Efficient Dynamic Evolution of Service Composition SCIE

作者:Lv, Chen; Jiang, Wei; Hu, Songlin; Wang, Jiye; Lu, Guoliang; Liu, Zhiyong

作者机构:[Lv, Chen] Shandong Normal Univ, Sch Informat Sci & Engn, Jinan, Shandong, Peoples R China.; [Jiang, Wei] CNPC, Greatwall Drilling Co R&D Acad Well Logging, Beijing, Peoples R China.; [Hu, Songlin] Chinese Acad Sci, Inst Informat Engn, Beijing, Peoples R China.; [Wang, Jiye] State Grid Corp China, Dept Informat Technol, Beijing, Peoples R China.; [Lu, Guoliang] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Liu, Zhiyong] Chinese Acad Sci, Inst Comp Technol, Beijing, Peoples R China.; [Liu, Zhiyong] Chinese Acad Sci, Inst Comp Technol, State Key Lab Comp Architecture, Beijing, Peoples R China.

来源:IEEE TRANSACTIONS ON SERVICES COMPUTING,2018,Vol.11,Issue.4,630-643

资源类型:期刊论文

WOS:000440871700004

23. Review on self-embedding fragile watermarking for image authentication and self-recovery EI

作者:Wang, Chengyou ;Zhang, Heng ;Zhou, Xiao

作者机构:[Wang, Chengyou ;Zhang, Heng ;Zhou, Xiao ] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, China

来源:Journal of Information Processing Systems,2018,Vol.14,Issue.2,510-522

资源类型:期刊论文

24. 大型轴类锻件矫直机液压系统的设计与分析

作者:吴瀚崚;刘延俊;李世振;薛钢

作者机构:[吴瀚崚;刘延俊;李世振;薛钢]山东大学海洋研究院.;[吴瀚崚;刘延俊;李世振;薛钢]山东大学机械工程学院高效洁净先进制造教育部重点实验室

来源:机床与液压,2018,Vol.46,Issue.20,59-63

资源类型:期刊论文

25. Force and segment wear in various granites cutting by diamond frame saw EI SCIE

作者:Sun, Qin; Zhang, Jinsheng; Zhang, Heng; Dong, Peiyu

作者机构:[Sun, Qin; Zhang, Jinsheng; Zhang, Heng; Dong, Peiyu] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Sun, Qin; Zhang, Jinsheng; Zhang, Heng; Dong, Peiyu] Res Ctr Stone Engn, Jinan, Shandong, Peoples R China.; [Sun, Qin; Zhang, Jinsheng; Zhang, Heng; Dong, Peiyu] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Sun, Qin] ShanDong YingCai Univ, Sch Mech Manufacture & Automat Engn, Jinan, Shandong, Peoples R China.

来源:PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2018,Vol.232,Issue.20,3696-3707

资源类型:期刊论文

WOS:000452807400009

26. 梯度结构Al_2O_3-(W,Ti)C-TiN-Mo-Ni纳米金属陶瓷刀具材料的设计及制备 EI CSCD SCOPUS

作者:倪秀英;赵军;孙加林;李洪江;侯冠明;田源

作者机构:[倪秀英] 山东大学机械工程学院;;鲁东大学交通学院, ;;, 济南;;烟台, ;;山东 250061;;264025,中国.;[赵军] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[孙加林] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[侯冠明] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[李洪江] 雷沃国际重工股份有限公司, 潍坊, 山东 261206, 中国.;[田源] 齐鲁工业大学机械与汽车工程学院, 济南, 山东 250061, 中国

来源:材料工程,Cailiao Gongcheng/Journal of Materials Engineering,2018,Vol.46,Issue.2,50-56

资源类型:期刊论文

27. 线轮廓检测设备偏差校准方法研究

作者:鹿呈志;骆伟超;胡天亮;张承瑞

作者机构:[鹿呈志;骆伟超;胡天亮;张承瑞]山东大学机械工程学院.;[鹿呈志;骆伟超;胡天亮;张承瑞]山东大学高效洁净机械制造教育部重点实验室.;[鹿呈志;骆伟超;胡天亮;张承瑞]山东大学苏州研究院

来源:组合机床与自动化加工技术,Modular Machine Tool & Automatic Manufacturing Technique,2018,Issue.08,105-108

资源类型:期刊论文

28. Interpolation filter design based on all-phase DST and its application to image demosaicking EI

作者:Zhou, Xiao ;Wang, Chengyou ;Zhang, Zhi ;Fu, Qiming

作者机构:[Zhou, Xiao ;Wang, Chengyou ;Zhang, Zhi ;Fu, Qiming ] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai; 264209, China

来源:Information (Switzerland),2018,Vol.9,Issue.9

资源类型:期刊论文

29. Numerical analysis of shell-side flow-induced vibration of elastic tube bundle in heat exchanger

作者:季家东;葛培琪;毕文波

作者机构:[季家东;葛培琪;毕文波]School of Mechanical Engineering;[季家东;葛培琪;毕文波] Anhui University of Science and Technology.;[季家东;葛培琪;毕文波]School of Mechanical Engineering;[季家东;葛培琪;毕文波] Shandong University

来源:Journal of Hydrodynamics,2018,Issue.02,249-257

资源类型:期刊论文

30. A modified artificial bee colony algorithm based on the self-learning mechanism EI SCOPUS

作者:Pang, Bao ;Song, Yong ;Zhang, Chengjin ;Wang, Hongling ;Yang, Runtao

作者机构:[Pang, Bao ;Wang, Hongling ] School of Control Science and Engineering, Shandong University, Jinan; 250061, China;[Song, Yong ;Zhang, Chengjin ;Yang, Runtao ] School of Mechanical, Electrical and Information Engineering, Shandong University atWeihai, Weihai; 264209, China

来源:Algorithms,2018,Vol.11,Issue.6

资源类型:期刊论文

31. Effects of Thermo-physical properties of Ti0.41Al0.59N coating on transient and steady cutting temperature distributions in coated cemented carbide tools SCOPUS SCIE

作者:Zhao, Jinfu; Liu, Zhanqiang

作者机构:[Zhao, Jinfu; Liu, Zhanqiang] Shandong Univ, Sch Mech Engn, MOE, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.; [Zhao, Jinfu; Liu, Zhanqiang] Shandong Univ, Key Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER,2018,Vol.96,80-89

资源类型:期刊论文

WOS:000441683300011

32. Mechanical properties of bovine cortical bone based on the automated ball indentation technique and graphics processing method EI SCOPUS SCIE

作者:Zhang, Airong; Zhang, Song; Bian, Cuirong

作者机构:[Zhang, Airong; Zhang, Song] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Zhang, Airong; Zhang, Song] Shandong Univ, Minist Educ, Key Lab Highefficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.; [Bian, Cuirong] Shandong Univ, Qilu Hosp, Dept Prosthodont, Jinan 250012, Shandong, Peoples R China.

来源:JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS,2018,Vol.78,321-328

资源类型:期刊论文

WOS:000423247700036

33. Experimental study of rectangular groove texture in the surface of photovoltaic silicon with diamond coated micro-milling tools EI SCOPUS SCIE

作者:Wu, Yuantai; Zhang, Lei; Ge, Peiqi; Gao, Yufei

作者机构:[Wu, Yuantai; Zhang, Lei; Ge, Peiqi; Gao, Yufei] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Wu, Yuantai; Zhang, Lei; Ge, Peiqi; Gao, Yufei] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING,2018,Vol.86,23-35

资源类型:期刊论文

WOS:000439119400004

34. 搅拌罐内基于EDEM-FLUENT耦合的多相流混合数值模拟

作者:王建明;邱钦宇;何讯超;

作者机构:[王建明;邱钦宇;何讯超]山东大学机械工程学院,中国

来源:郑州大学学报(工学版),2018,Vol.39,Issue.05,79-84

资源类型:期刊论文

35. 无色差光滑曲面特征点的提取及匹配算法 EI CSCD SCOPUS

作者:许鹏飞;姜兆亮;赵阳;朱先萌

作者机构:[许鹏飞] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[赵阳] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[朱先萌] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[姜兆亮] 山东大学机械工程学院;;山东大学, ;;高效洁净机械制造教育部重点实验室, 济南;;济南, 山东;;山东 250061;;250061, 中国

来源:光学学报,Guangxue Xuebao/Acta Optica Sinica,2018,Vol.38,Issue.4,277-284

资源类型:期刊论文

36. A survey on passive image copy-move forgery detection EI

作者:Zhang, Zhi ;Wang, Chengyou ;Zhou, Xiao

作者机构:[Zhang, Zhi ;Wang, Chengyou ;Zhou, Xiao ] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, China

来源:Journal of Information Processing Systems,2018,Vol.14,Issue.1,6-31

资源类型:期刊论文

37. Cutting characteristics of porcine tenderloin tissue along tangential direction of surface EI SCIE

作者:Wang, Dongqi; Song, Qinghua; Liu, Zhanqiang; Wan, Yi

作者机构:[Wang, Dongqi; Song, Qinghua; Liu, Zhanqiang; Wan, Yi] Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Wang, Dongqi; Song, Qinghua; Liu, Zhanqiang; Wan, Yi] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,Vol.98,Issue.1-4,17-27

资源类型:期刊论文

WOS:000442582500002

38. 波纹翅片通道内液化天然气流动沸腾换热特性分析

作者:师艳平;王皓显;李剑锐;胡海涛;陈慧;

作者机构:[师艳平;王皓显;李剑锐;胡海涛;陈慧]山东大学机械工程学院;[师艳平;王皓显;李剑锐;胡海涛;陈慧]上海交通大学制冷与低温工程研究所;[师艳平;王皓显;李剑锐;胡海涛;陈慧]山西汾西重工有限责任公司

来源:制冷技术,Chinese Journal of Refrigeration Technology,2018,Issue.02,27-32

资源类型:期刊论文

39. 基于遗传算法的3-PCR减振平台等效刚度设计 CSCD

作者:郑良辰; 牛军川; 张福亮; 刘知辉

作者机构:[郑良辰]山东大学机械工程学院, 济南, 山东 250061, 中国;[张福亮]山东大学机械工程学院, 济南, 山东 250061, 中国;[刘知辉]山东大学机械工程学院, 济南, 山东 250061, 中国;[牛军川]山东大学机械工程学院;;山东大学, ;;高效洁净机械制造教育部重点实验室, 济南;;济南, 山东;;山东 250061;;250061, 中国.

来源:机械传动,Journal of Mechanical Transmission,2018,Vol.42,Issue.8,55-60+103

资源类型:期刊论文

40. 余热锅炉给水泵轴瓦失效分析

作者:张明;解海宝;王威强;

作者机构:[张明]山东大学机械工程学院;[解海宝]齐鲁工业大学(山东省科学院)机械与汽车工程学院;[王威强]山东省特种设备安全工程技术研究中心

来源:齐鲁工业大学学报,2018,Issue.01,47-49

资源类型:期刊论文

共 31 页, 609 条记录

TOP