按条件检索“8,322”条记录

已选条件: 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
1. 新型动静压转台螺旋油楔几何参数优化

作者:田再浩;马金奎;路长厚;陈淑江;聂玉龙;

作者机构:[田再浩;马金奎;路长厚;陈淑江;聂玉龙]山东大学机械工程学院,中国

来源:组合机床与自动化加工技术,2019,Issue.05,8-13

资源类型:期刊论文

2. Surface quality evaluation of single crystal 4H-SiC wafer machined by hybrid laser-waterjet: Comparing with laser machining EI SCOPUS SCIE

作者:Feng, Shaochuan; Huang, Chuanzhen; Wang, Jun; Jia, Zhixin

作者机构:[Feng, Shaochuan; Jia, Zhixin] Univ Sci & Technol Beijing, Sch Mech Engn, Beijing 100083, Peoples R China.; [Huang, Chuanzhen] Shandong Univ, Sch Mech Engn, Minist Educ, Ctr Adv Jet Engn Technol CaJET,Key Lab High Effic, Jinan 250061, Shandong, Peoples R China.; [Wang, Jun] UNSW, Sch Mech & Mfg Engn, Sydney, NSW 2052, Australia.

来源:MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING,2019,Vol.93,238-251

资源类型:期刊论文

WOS:000457727300029

3. Comparison of wear performance of diamond tools in frame sawing with different trajectories EI SCOPUS SCIE

作者:Zhang, Heng; Zhang, Jinsheng; Wang, Shuo

作者机构:[Zhang, Heng; Zhang, Jinsheng; Wang, Shuo] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ, Jinan 250061, Shandong, Peoples R China.; [Zhang, Heng; Zhang, Jinsheng; Wang, Shuo] Res Ctr Stone Engn Shandong Prov, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS,2019,Vol.78,178-185

资源类型:期刊论文

WOS:000451489300021

4. A dynamic parameter identification method of industrial robots considering joint elasticity EI SCOPUS SCIE

作者:Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao

作者机构:[Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS,2019,Vol.16,Issue.1

资源类型:期刊论文

WOS:000458755700001

5. Investigation on the milling performance of amputating clamping supports for machining with industrial robot EI SCOPUS SCIE

作者:Zhang, Yiran; Guo, Kai; Sun, Jie

作者机构:[Zhang, Yiran; Guo, Kai; Sun, Jie] Shandong Univ, Res Ctr Aeronaut Component Mfg Technol & Equipmen, Jinan 250061, Shandong, Peoples R China.; [Zhang, Yiran; Guo, Kai; Sun, Jie] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech, Minist Educ, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.102,Issue.9-12,3573-3586

资源类型:期刊论文

WOS:000469060700060

6. A comparison of TIG-MIG hybrid welding with conventional MIG welding in the behaviors of arc, droplet and weld pool EI SCOPUS SCIE

作者:Zong, Ran; Chen, Ji; Wu, Chuansong

作者机构:[Zong, Ran] Shandong Univ Technol, Sch Mech Engn, 266 Xincun Rd, Zibo 255000, Peoples R China.; [Chen, Ji; Wu, Chuansong] Shandong Univ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Shandong, Peoples R China.

来源:JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2019,Vol.270,345-355

资源类型:期刊论文

WOS:000468712800031

7. Inter-sample output predictor based sampled-data ADRC supporting high precision control of VCM servo systems EI SCOPUS SCIE

作者:Tian, Chuan; Yan, Peng; Zhang, Zhen

作者机构:[Tian, Chuan; Yan, Peng] Beihang Univ, Sch Automat Sci & Elect Engn, Xueyuan Rd 37, Beijing 100191, Peoples R China.; [Yan, Peng] Shandong Univ, Minist Educ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg, 17923 Jingshi Rd, Jinan 250061, Shandong, Peoples R China.; [Zhang, Zhen] Tsinghua Univ, Dept Mech Engn, Beijing 100084, Peoples R China.

来源:CONTROL ENGINEERING PRACTICE,2019,Vol.85,138-148

资源类型:期刊论文

WOS:000463312400014

8. Translocation, biotransformation-related degradation, and toxicity assessment of polyvinylpyrrolidone-modified 2H-phase nano-MoS2 EI SCIE

作者:Mei, Linqiang; Zhang, Xiao; Yin, Wenyan; Dong, Xinghua; Guo, Zhao; Fu, Wenhui; Su, Chunjian; Gu, Zhanjun; Zhao, Yuliang

作者机构:[Mei, Linqiang; Su, Chunjian] Shandong Univ Sci & Technol, Coll Mech & Elect Engn, Qingdao 266590, Shandong, Peoples R China.; [Mei, Linqiang; Zhang, Xiao; Yin, Wenyan; Dong, Xinghua; Guo, Zhao; Fu, Wenhui; Gu, Zhanjun; Zhao, Yuliang] Chinese Acad Sci, Key Lab Biomed Effects Nanomat & Nanosafety, Inst High Energy Phys, Beijing 100049, Peoples R China.; [Mei, Linqiang; Zhang, Xiao; Yin, Wenyan; Dong, Xinghua; Guo, Zhao; Fu, Wenhui; Gu, Zhanjun; Zhao, Yuliang] Chinese Acad Sci, CAS Ctr Excellence Nanosci, Natl Ctr Nanosci & Technol China, Beijing 100049, Peoples R China.

来源:NANOSCALE,2019,Vol.11,Issue.11,4767-4780

资源类型:期刊论文

WOS:000462669600011

9. A Data-Driven-Based Wavelet Support Vector Approach for Passenger Flow Forecasting of the Metropolitan Hub EI SCOPUS SCIE

作者:Tang, Ming; Li, Zhiwu; Tian, Guangdong

作者机构:[Tang, Ming; Tian, Guangdong] Jilin Univ, Transportat Coll, Changchun 130022, Jilin, Peoples R China.; [Tang, Ming] Jilin Univ, Sch Management, Changchun 130022, Jilin, Peoples R China.; [Li, Zhiwu] Macau Univ Sci & Technol, Inst Syst Engn, Macau 999078, Peoples R China.; [Li, Zhiwu] Xidian Univ, Sch Electromech Engn, Xian 710071, Shaanxi, Peoples R China.; [Tian, Guangdong] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:IEEE ACCESS,2019,Vol.7,7176-7183

资源类型:期刊论文

WOS:000456771400001

10. Ontology-Based Noise Source Identification and Key Feature Selection: A Case Study on Tractor Cab EI SCOPUS SCIE

作者:Han, Su; Zhou, Yiqi; Chen, Yanzhao; Wei, Chenglong; Li, Rui; Zhu, Bo

作者机构:[Han, Su; Zhou, Yiqi; Wei, Chenglong; Li, Rui] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Han, Su; Zhou, Yiqi; Wei, Chenglong; Li, Rui] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Chen, Yanzhao] Qilu Univ Technol, Sch Mech & Automot Engn, Shandong Acad Sci, Jinan, Shandong, Peoples R China.; [Zhu, Bo] Shandong Univ, Sch Mat Sci & Engn, Jinan 250000, Shandong, Peoples R China.

来源:SHOCK AND VIBRATION,2019,Vol.2019

资源类型:期刊论文

WOS:000459099400001

11. 基于价值流图析技术的减速器装配流程优化

作者:常艳茹;徐志刚;董舒豪;秦开仲;杨得玉

作者机构:[常艳茹;徐志刚;董舒豪;秦开仲;杨得玉]山东大学机械工程学院.;[常艳茹;徐志刚;董舒豪;秦开仲;杨得玉]山东大学深圳研究院

来源:制造技术与机床,2019,Issue.06,164-169

资源类型:期刊论文

12. Free vibration analysis of bilayered circular micro-plate including surface effects EI SCOPUS SCIE

作者:Zhou, Shasha; Zhang, Rongmin; Zhou, Shenjie; Li, Anqing

作者机构:[Zhou, Shasha; Zhang, Rongmin; Li, Anqing] Qilu Univ Technol, Shandong Acad Sci, Sch Mech & Automot Engn, Daxue Rd 3501, Jinan 250353, Shandong, Peoples R China.; [Zhou, Shenjie] Shandong Univ, Sch Mech Engn, Jingshi Rd 17923, Jinan 250061, Shandong, Peoples R China.

来源:APPLIED MATHEMATICAL MODELLING,2019,Vol.70,54-66

资源类型:期刊论文

WOS:000468714000004

13. Nucleation location and propagation direction of radial and median cracks for brittle material in scratching EI SCOPUS SCIE

作者:Li, Xinying; Gao, Yufei; Ge, Peiqi; Zhang, Lei; Bi, Wenbo; Meng, Jianfeng

作者机构:[Li, Xinying; Gao, Yufei; Ge, Peiqi; Zhang, Lei; Bi, Wenbo; Meng, Jianfeng] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Gao, Yufei; Ge, Peiqi; Zhang, Lei] Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Beijing, Peoples R China.

来源:CERAMICS INTERNATIONAL,2019,Vol.45,Issue.6,7524-7536

资源类型:期刊论文

WOS:000460492200118

14. 基于AMESim拖拉机负载敏感液压提升系统研究

作者:张振华;李瑞川;杨俊茹;徐继康;刘延俊

作者机构:[张振华;李瑞川;杨俊茹;徐继康;刘延俊]山东科技大学机械电子工程学院.;[张振华;李瑞川;杨俊茹;徐继康;刘延俊]山东五征集团有限公司.;[张振华;李瑞川;杨俊茹;徐继康;刘延俊]日照海卓液压有限公司.;[张振华;李瑞川;杨俊茹;徐继康;刘延俊]山东大学机械工程学院

来源:农机化研究,2019,Issue.02,242-247

资源类型:期刊论文

15. Simulation and optimization of overlapped iteration process with multi-coupled activities based on value analysis EI SCOPUS SCIE

作者:Yin, Fupeng; Gao, Qi; Ji, Xue

作者机构:[Yin, Fupeng; Gao, Qi; Ji, Xue] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Yin, Fupeng; Ji, Xue] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.

来源:CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS,2019,Vol.27,Issue.1,57-67

资源类型:期刊论文

WOS:000461561100005

16. Feasibility study of the Ti(C7N3)-based cermet micro-mill based on dynamic fatigue behavior and modeling of the contact stress distribution on the round cutting edge EI

作者:Wang, Yishun ;Zou, Bin ;Huang, Chuanzhen ;Qi, Huan ;Song, Jinpeng

作者机构:[Wang, Yishun ;Zou, Bin ;Huang, Chuanzhen ] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, 17923 Jing Shi Road, Jinan; 250061, China;[Wang, Yishun ;Zou, Bin ;Huang, Chuanzhen ] National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, China;[Wang, Yishun ;Zou, Bin ;Huang, Chuanzhen ] Key Laboratory of High-Efficiency and Clean Mechanical Manufacture at Shandong University, Ministry of Education, China;[Song, Jinpeng ] School of Mechanical Engineering, Taiyuan University of Technology, Taiyuan; 030024, China;[Qi, Huan ] Key Laboratory of Special Purpose Equipment and Advanced Processing Technology, Ministry of Education and Zhejiang Province, Zhejiang University of Technology, Hangzhou; 310014, China

来源:International Journal of Mechanical Sciences,2019,Vol.155,143-158

资源类型:期刊论文

17. Fabrication of a low adhesive superhydrophobic surface on Ti6Al4V alloys using TiO2/Ni composite electrodeposition EI

作者:Meng, Jianbing ;Dong, Xiaojuan ;Zhao, Yugang ;Xu, Rufeng ;Bai, Xue ;Zhou, Haian

作者机构:[Meng, Jianbing ;Dong, Xiaojuan ;Zhao, Yugang ;Xu, Rufeng ;Bai, Xue ;Zhou, Haian ] School of Mechanical Engineering, Shandong University of Technology, Zibo, Shandong; 255000, China

来源:Micromachines,2019,Vol.10,Issue.2

资源类型:期刊论文

18. A high order scheme for unsteady heat conduction equations EI SCOPUS SCIE

作者:Xu, Mingtian

作者机构:[Xu, Mingtian] Shandong Univ, Sch Civil Engn, Dept Engn Mech, Jinan 250061, Shandong, Peoples R China.

来源:APPLIED MATHEMATICS AND COMPUTATION,2019,Vol.348,565-574

资源类型:期刊论文

WOS:000456796600039

19. 基于竞争神经网络的全局K-Medoids聚类算法研究

作者:曹勇;王兆辉;高琦;甄丽红

作者机构:[曹勇;王兆辉;高琦;甄丽红]山东大学机械工程学院CAD/CAM研究所.;[曹勇;王兆辉;高琦;甄丽红]山东省科技发展服务推进中心

来源:组合机床与自动化加工技术,2019,Issue.06,1-4+8

资源类型:期刊论文

20. Exploring the effects of crystal facet in Bi2WO6/BiOCl heterostructures on photocatalytic properties: A first-principles theoretical study EI

作者:Sun, Honggang ;Tian, Zhixue ;Zhou, Guoli ;Zhang, Junmeng ;Li, Pan

作者机构:[Sun, Honggang ] School of Mechanical, Electrical & Information Engineering, Shandong University, Weihai; 264209, China;[Tian, Zhixue ;Zhou, Guoli ;Zhang, Junmeng ;Li, Pan ] College of Physics and Information Engineering, Hebei Advanced Thin Films Laboratory, Hebei Normal University, Shijiazhuang; 050024, China

来源:Applied Surface Science,2019,Vol.469,125-134

资源类型:期刊论文

共 417 页, 8,322 条记录

TOP