按条件检索“675”条记录

已选条件: 数据来源: EI × 数据来源: SCOPUS × 数据来源: CNKI × 数据来源: 万方 × 数据来源: WOS × 数据来源: CSCD × 出版年: 2010 × 机构: 机械工程学院 × 机构: 土建与水利学院 ×
导出
  • 排序
  • 显示
1. 复合改性沥青桥面防水涂膜的性能研究

作者:薛志超;曹卫东;周冰;

作者机构:[薛志超;曹卫东;周冰]同济大学交通运输工程学院;[薛志超;曹卫东;周冰]山东省交通厅公路局;[薛志超;曹卫东;周冰]山东大学土建与水利学院;[薛志超;曹卫东;周冰]山东济菏高速公路有限公司

来源:公路交通科技(应用技术版),2010,Issue.10,187-189

资源类型:期刊论文

2. 生命理性与多维生成——中国古代空间范式下规划体系隐性框架探源

作者:王金岩;

作者机构:[王金岩]山东大学土建与水利学院建筑学系

来源:规划师,PLANNERS,2010,Issue.08,122-125

资源类型:期刊论文

3. 渗灌技术在高速公路中央分隔带绿化中的应用

作者:黄刚;姚占勇;

作者机构:[黄刚]国核电力规划设计研究院土建部;[姚占勇]山东大学土建学院

来源:河北交通科技,2010,Issue.02,1-4+19

资源类型:期刊论文

4. 真空降水-低能强夯联合加固粉土地基的研究

作者:王红红;刘相宜;宋修广;

作者机构:[王红红;刘相宜;宋修广]山东大学土建与水利学院

来源:路基工程,SUBGRADE ENGINEERING,2010,Issue.05,32-35

资源类型:期刊论文

5. 海水侵蚀后混凝土三轴强度准则研究 EI SCOPUS

作者:张峰;刘小燕;李术才;

作者机构:[张峰;刘小燕;李术才]山东大学土建与水利学院;[张峰;刘小燕;李术才]长沙理工大学土木与建筑学院

来源:工程力学,Gongcheng Lixue/Engineering Mechanics,2010,Vol.27,Issue.9,209-215

资源类型:期刊论文

6. 水源地保护环境绩效评估指标体系的构建

作者:李传奇;李向富;

作者机构:[李传奇]山东大学土建与水利学院;[李向富]济南市水利局

来源:水利科技与经济,WATER CONSERVANCY SCIENCE AND TECHNOLOGY AND ECONOMY,2010,Issue.09,979-981

资源类型:期刊论文

7. 基于双曲线法的软土地基沉降预测

作者:李永睿;王萌;刘光辉;

作者机构:[李永睿;王萌;刘光辉]山东菏泽市公路局;[李永睿;王萌;刘光辉]山东大学土建与水利学院

来源:科技传播,2010,Issue.13,73+69

资源类型:期刊论文

8. Study on the effect of thermal contact resistance and coupled heat and moisture on temperature field of CFST columns EI

作者:Zhang, Jiang-Bin ;Xu, Zhao-Dong ;Han, Jin-Sheng ;Sun, Sheng

作者机构:[Zhang, Jiang-Bin ;Xu, Zhao-Dong ] College of Civil Engineering, Southeast University, Nanjing 210096, China;[Han, Jin-Sheng ] College of Civil Engineering, Shandong University of Science and Technology, Tsingtao 266510, China;[Xu, Zhao-Dong ] Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, Southeast University, Nanjing 210096, China;[Zhang, Jiang-Bin ;Sun, Sheng ] Jiangsu Existing Architectural Engineering Evaluation and Consulting Co. Ltd, Nanjing 210000, China

来源:Gongcheng Lixue/Engineering Mechanics,2010,Vol.27,Issue.9,133-138+174

资源类型:期刊论文

9. Cutting performance and wear mechanism of Si3N4-Based nanocomposite ceramic tool EI

作者:Zou, Bin ;Huang, Chuanzhen ;Liu, Hanlian ;Song, Jinpeng

作者机构:[Zou, Bin ;Huang, Chuanzhen ;Liu, Hanlian ;Song, Jinpeng ] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan; 250061, China;[Zou, Bin ;Huang, Chuanzhen ;Liu, Hanlian ;Song, Jinpeng ] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China

会议名称:9th Asia-Pacific Conference on Materials Processing, APCMP 2010

会议日期:July 7, 2010 - July 10, 2010

来源:Key Engineering Materials,2010,Vol.443,324-329

资源类型:会议论文

10. Effects of CeO2on the mechanical property and microstructure of 3Y-TZP nanocomposite ceramic die material EI

作者:Shikui, Zhao ;Chonghai, Xu

作者机构:[Shikui, Zhao ;Chonghai, Xu ] Shandong Institute of Light Industry, School of Mechanical Engineering, Jinan 250353, China;[Chonghai, Xu ] School of Mechanical Engineering, Shandong University, Jinan 250061, China

会议名称:6th China International Conference on High-Performance Ceramics, CICC-6

会议日期:August 16, 2009 - August 19, 2009

来源:Key Engineering Materials,2010,Vol.434-435,42-44

资源类型:会议论文

11. Research on molding ambient temperature influencing to the performance of friction materials EI

作者:Qu, Qingwen ;Zhang, Haoqian ;Zhou, Lan ;Wang, Chengjun

作者机构:[Qu, Qingwen ;Zhang, Haoqian ;Zhou, Lan ;Wang, Chengjun ] Department of Mechanical Engineering, Shandong University of Technology, ZiBo, ShanDong, 255049, China

会议名称:2010 International Conference on Intelligent Computation Technology and Automation, ICICTA 2010

会议日期:May 11, 2010 - May 12, 2010

来源:2010 International Conference on Intelligent Computation Technology and Automation, ICICTA 2010,2010,Vol.3,32-35

资源类型:会议论文

12. Rapid water injection technology in extremely thin coal seam working face EI

作者:Miao, Dejun ;Cheng, Weimin ;Zhang, Shengzhu ;Sui, Xiuhua

作者机构:[Miao, Dejun ;Cheng, Weimin ] Key Laboratory of Mine Hazard Prevention and Control, China Ministry of Education, Shandong University of Science and Technology, China;[Sui, Xiuhua ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, China;[Zhang, Shengzhu ] Faculty of Resources and Safety Engineering, China University of Mining and Technology, Beijing, China

来源:ICMHPC - 2010 International Conference on Mine Hazards Prevention and Control,2010256-261

资源类型:会议论文

13. Research on envelope analysis for bearings fault detection EI

作者:Sui, Wentao ;Zhang, Dan

作者机构:[Sui, Wentao ] School of Mechanical Engineering, Shandong University of Technology, Zibo, China;[Zhang, Dan ] School of Electrical and Electronic Engineering, Shandong University of Technology, Zibo, China

来源:ICCSE 2010 - 5th International Conference on Computer Science and Education, Final Program and Book of Abstracts,2010973-976

资源类型:会议论文

14. Design a wireless temperature measurement system based on NRF9E5 and DS18B20 EI

作者:Zhang, Yu ;Wang, ZhiShan ;Li, Jinhua

作者机构:[Zhang, Yu ] School of Mechanical Engineering, Shandong University of Technology, Zibo, Shandong Province, China;[Wang, ZhiShan ;Li, Jinhua ] School of WeiFang Economie, Technical Supervision Department, WeiFang, Shandong Province, China

会议名称:International Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2010

会议日期:March 13, 2010 - March 14, 2010

来源:2010 International Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2010,2010,Vol.1,910-913

资源类型:会议论文

15. 地下储库材料参数概率分布估计及体系可靠度分析

作者:刘健;宋娟;张强勇;张文倩;

作者机构:[刘健;宋娟;张强勇;张文倩]山东大学土建与水利学院

来源:武汉理工大学学报,2010,Issue.09,76-79+105

资源类型:期刊论文

16. Dynamic analysis of the bioprosthetic heart valve EI SCOPUS

作者:Yuan, Quan ;Ye, Xin ;Cong, Hua

作者机构:[Yuan, Quan ] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[Cong, Hua ] School of Medicine, Shandong University, Jinan 250012, China;[Ye, Xin ] School of Mechanical Engineering, Shandong University, Jinan 250002, China

会议名称:2010 International Conference on Artificial Intelligence and Computational Intelligence, AICI 2010

会议日期:23 October 2010 through 24 October 2010

来源:Proceedings - International Conference on Artificial Intelligence and Computational Intelligence, AICI 2010,2010,Vol.1,310-315

资源类型:会议论文;期刊论文

17. 济钢1号高炉液压开口机的改造

作者:杨士岭;胡小龙;齐先峰;曹学杰;董英;吴淑峰;

作者机构:[杨士岭;胡小龙;齐先峰;曹学杰;董英;吴淑峰]山东大学机械工程学院;[杨士岭;胡小龙;齐先峰;曹学杰;董英;吴淑峰]济南钢铁股份有限公司

来源:世界钢铁,WORLD IRON & STEEL,2010,Issue.03,18-21

资源类型:期刊论文

18. The Improved Matter Element Extension Evaluating Model and Application CPCI-S EI SCOPUS

作者:Sun, Xiu-ling; Wang, Bao-quan

作者机构:[Sun, Xiu-ling; Wang, Bao-quan] Shandong Univ, Sch Civil Engn, Jinan 250061, Peoples R China.

会议名称:4th International Conference on Bioinformatics and Biomedical Engineering (iCBBE)

会议日期:JUN 18-20, 2010

来源:2010 4TH INTERNATIONAL CONFERENCE ON BIOINFORMATICS AND BIOMEDICAL ENGINEERING (ICBBE 2010),2010

资源类型:会议论文;期刊论文

WOS:000397260202034

19. A new design method for calculating critical temperatures of restrained steel column in fire EI SCOPUS SCIE

作者:Wang, Peijun; Wang, Yong-Chang; Li, Guo-Qiang

作者机构:[Wang, Peijun] Shandong Univ, Sch Civil Engn, Jinan 250061, Shandong, Peoples R China.; [Wang, Peijun; Li, Guo-Qiang] State Key Lab Disaster Reduct Civil Engn, Shanghai 200092, Peoples R China.; [Wang, Yong-Chang] Univ Manchester, Sch Mech Aerosp & Civil Engn, Manchester M60 1QD, Lancs, England.; [Li, Guo-Qiang] Tongji Univ, Coll Civil Engn, Shanghai 200092, Peoples R China.

来源:FIRE SAFETY JOURNAL,2010,Vol.45,Issue.6-8,349-360

WOS被引数:6

资源类型:期刊论文

WOS:000284082500002

20. The Study of Mechanical Product Concept Design Method based on Reverse Engineering CPCI-S EI SCOPUS

作者:Li, Peigang; Feng, Xianying; Shen, Xiaoxia; Zhang, Chengliang

作者机构:[Li, Peigang; Feng, Xianying; Shen, Xiaoxia; Zhang, Chengliang] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

会议名称:International Conference on Manufacturing Science and Engineering (ICMSE 2009)

会议日期:DEC 26-28, 2009

来源:MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5,2010,Vol.97-101,3731-3736

资源类型:会议论文;期刊论文

WOS:000279864702025

共 34 页, 675 条记录

TOP