按条件检索“243”条记录

已选条件: 数据来源: CNKI × 数据来源: 万方 × 数据来源: SCOPUS × 数据来源: EI × 数据来源: CSCD × 数据来源: WOS × 出版年: 2010 × 机构: 机械工程学院 × 文献类型: 期刊论文 ×
导出
  • 排序
  • 显示
1. 两轮同轴机器人的自平衡控制研究

作者:王建俊;

作者机构:[王建俊]山东大学机械工程学院

来源:数字技术与应用,DIGITAL TECHNOLOGY AND APPLICATION,2010,Issue.07,105-106

资源类型:期刊论文

2. 济钢1号高炉液压开口机的改造

作者:杨士岭;胡小龙;齐先峰;曹学杰;董英;吴淑峰;

作者机构:[杨士岭;胡小龙;齐先峰;曹学杰;董英;吴淑峰]山东大学机械工程学院;[杨士岭;胡小龙;齐先峰;曹学杰;董英;吴淑峰]济南钢铁股份有限公司

来源:世界钢铁,WORLD IRON & STEEL,2010,Issue.03,18-21

资源类型:期刊论文

3. 全可变气门机构技术现状的分析与研究

作者:顾珂韬;杨化军;董丽军;陈俭;

作者机构:[顾珂韬;杨化军;董丽军;陈俭]山东大学机械工程学院;[顾珂韬;杨化军;董丽军;陈俭]济南柴油机股份有限公司;[顾珂韬;杨化军;董丽军;陈俭]中国船舶燃料供应青岛有限公司

来源:内燃机与动力装置,INTERNAL COMBUSTION ENGINE & POWER PLANT,2010,Issue.06,16-20

资源类型:期刊论文

4. 镍基粉末高温合金的铣削加工 EI SCOPUS

作者:杜劲;刘战强;杨奇彪;叶洪涛;庞继有;

作者机构:[杜劲;刘战强;杨奇彪;叶洪涛;庞继有]山东大学机械工程学院;[杜劲;刘战强;杨奇彪;叶洪涛;庞继有]沈阳黎明航空发动机(集团)有限责任公司

来源:沈阳工业大学学报,Shenyang Gongye Daxue Xuebao/Journal of Shenyang University of Technology,2010,Vol.32,Issue.5,536-540

资源类型:期刊论文

5. 整体硬质合金立铣刀高速加工钛合金振动分析 EI SCOPUS

作者:皇攀凌;李剑峰;孙杰;宋良煜;

作者机构:[皇攀凌;李剑峰;孙杰;宋良煜]山东大学机械工程学院;[皇攀凌;李剑峰;孙杰;宋良煜]山东大学高效洁净机械制造教育部重点实验室;[皇攀凌;李剑峰;孙杰;宋良煜]中航工业集团成都飞机制造有限责任公司

来源:粉末冶金材料科学与工程,Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy,2010,Vol.15,Issue.6,574-579

资源类型:期刊论文

6. Fabrication and performance of Al2O3/(W,Ti)C + Al2O3/TiC multilayered ceramic cutting tools EI SCOPUS SCIE

作者:Deng Jianxin; Duan Zhenxing; Yun Dongling; Zhang Hui; Ai Xing; Zhao Jun

作者机构:[Deng Jianxin; Duan Zhenxing; Yun Dongling; Zhang Hui; Ai Xing; Zhao Jun] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2010,Vol.527,Issue.4-5,1039-1047

WOS被引数:14

资源类型:期刊论文

WOS:000273983900025

7. Element distribution and phase constitution of Al_2O _3-TiC/W18Cr4V vacuum diffusion bonded joint EI SCOPUS SCIE

作者:Wanqun, H.;Yajiang, L.;Juan, W.;Qinglei, J.

作者机构:[Wanqun, H] Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Shandong University, Jing Shi Road 17923, Jinan 250061, China, College of Mechanical and Electronic Engineering, China University of Petroleum (East China), Dongying 257061, China;[ Yajiang, L] Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Shandong University, Jing Shi Road 17923, Jinan 250061, China;[ Juan, W] Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Shandong University, Jing Shi Road 17923, Jinan 250061, China;[ Qinglei, J] Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Shandong University, Jing Shi Road 17923, Jinan 250061, China

来源:Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,VACUUM,2010,Vol.85,Issue.2,327-331

资源类型:期刊论文

WOS:000282548700038

8. Numerical simulation of laminar flow field in a stirred tank with a Rushton impeller and a pitch 4-bladed turbine EI SCOPUS

作者:Zhou, Shen-Jie ;Luan, De-Yu ;Chen, Song-Ying

作者机构:[Zhou, Shen-Jie ;Luan, De-Yu ;Chen, Song-Ying ] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[Luan, De-Yu ] School of Mechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061, China

来源:Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics,2010,Vol.31,Issue.SUPPL.,257-260

资源类型:期刊论文

9. High energy milling method to prepare Al/WC composite coatings in Al-Si alloys EI SCOPUS SCIE

作者:Wu Yuying; Liu Xiangfa; Ma Guolong; Li Chong; Zhang Junqing

作者机构:[Wu Yuying; Liu Xiangfa; Ma Guolong; Li Chong; Zhang Junqing] Shandong Univ, Minist Educ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Jinan 250061, Shandong, Peoples R China.; [Wu Yuying] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:JOURNAL OF ALLOYS AND COMPOUNDS,2010,Vol.497,Issue.1-2,139-141

WOS被引数:9

资源类型:期刊论文

WOS:000278744600033

10. 技术创新策略比较与实证检验

作者:于珍;

作者机构:[于珍]清华大学公共管理学院,山东大学机械工程学院

来源:产业经济评论,CHANYE JINGJI PING LUN,2010,Issue.03,132-146

资源类型:期刊论文

11. 基于多情境特征的LCA方法

作者:王晓伟;李方义;李剑峰;

作者机构:[王晓伟;李方义;李剑峰]山东大学机械工程学院;[王晓伟;李方义;李剑峰]山东建筑大学机电工程学院

来源:日用电器,2010,Issue.12,49-51

资源类型:期刊论文

12. 高速铣削69111不锈钢的硬质合金刀具磨损机理研究 CSCD

作者:周建涛;邓建新;李友生

作者机构:[周建涛] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[邓建新] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[李友生] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:制造技术与机床,Manufacturing Technology & Machine Tool,2010,Issue.9,94-96

资源类型:期刊论文

13. 钛合金铣削加工表面残余应力研究 SCOPUS

作者:陈建岭;李剑峰;孙杰;王中秋;

作者机构:[陈建岭;李剑峰;孙杰;王中秋]山东大学机械工程学院

来源:机械强度,Jixie Qiangdu/Journal of Mechanical Strength,2010,Vol.32,Issue.1,53-57

资源类型:期刊论文

14. 硬质合金刀具车削钛合金时切削力分形特征研究

作者:郑光明;赵军;王晓琴;

作者机构:[郑光明]山东大学机械工程学院高效洁净机械制造教育部重点实验室;[赵军]山东大学;[王晓琴]济南大学

来源:工具技术,TOOL ENGINEERING,2010,Issue.01,23-25

资源类型:期刊论文

15. Failure analysis of the brittle fracture of a thick-walled 20 steel pipe in an ammonia synthesis unit EI SCOPUS SCIE

作者:Haoxuan Cui;Weiqiang Wang;Aiju Li

作者机构:[Cui, H] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China;[ Wang, W] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China;[ Li, A] Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China, School of Materials Science and Engineering, Shandong University, Jinan 250061, Shandong, China;[ Li, M] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China;[ Xu, S] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China;[ Liu, H] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China

来源:Engineering failure analysis,ENGINEERING FAILURE ANALYSIS,2010,Vol.17,Issue.6,1359-1376

WOS被引数:6

资源类型:期刊论文

WOS:000280885100010

16. Research on material constitutive model at large range of strain and strain rate EI SCOPUS

作者:Fu, Xiu-Li ;Pan, Yong-Zhi ;Ai, Xing ;Wan, Yi

作者机构:[Fu, Xiu-Li ;Pan, Yong-Zhi ] Department of Mechanical Engineering, University of Jinan, Jinan 250022, China;[Ai, Xing ;Wan, Yi ] Department of Mechanical Engineering, Shandong University, Jinan 250061, China

来源:Journal of Harbin Institute of Technology (New Series),2010,Vol.17,Issue.SUPPL. 1,37-40

资源类型:期刊论文

17. Simulation and analysis of aerodynamics for high speed face milling cutters EI SCOPUS SCIE

作者:Ji ChunHui; Liu ZhanQiang; Liu LuNing

作者机构:[Ji, C] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Liu, Z] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Liu, L] School of Mechanical Engineering, Shandong University, Jinan 250061, China

来源:中国科学(技术科学)(英文版),SCIENCE CHINA-TECHNOLOGICAL SCIENCES,2010,Vol.53,Issue.9,2575-2580

WOS被引数:2

资源类型:期刊论文

WOS:000280810100037

18. 晶粒生长过程的相场模型研究进展

作者:周有欣;黄传真;

作者机构:[周有欣;黄传真]山东大学机械工程学院高效洁净机械制造教育部重点实验室

来源:材料导报,2010,Issue.S1,223-226

资源类型:期刊论文

19. Layered structures in ceramic nozzles for improved erosion wear resistance in industrial coal-water-slurry boilers EI SCOPUS SCIE

作者:Deng Jianxin;Yun Dongling;Zhou Houmin

作者机构:[Deng, J] School of Mechanical Engineering, Shandong University, Jinan, 250061 Shandong Province, China;[ Yun, D] School of Mechanical Engineering, Shandong University, Jinan, 250061 Shandong Province, China;[ Zhou, H] School of Mechanical Engineering, Xiangtan University, Xiangtan, 411105 Hunan Province, China;[ Tan, Y] School of Mechanical Engineering, Xiangtan University, Xiangtan, 411105 Hunan Province, China

来源:CERAMICS INTERNATIONAL,CERAMICS INTERNATIONAL,2010,Vol.36,Issue.1,299-306

WOS被引数:2

资源类型:期刊论文

WOS:000273120100043

20. 金刚石圆锯片锯解花岗石切削力及参数优化的实验研究

作者:郑春英;张进生;王志;张政梅;高胜;

作者机构:[郑春英;张进生;王志;张政梅;高胜]山东大学;[郑春英;张进生;王志;张政梅;高胜]山东省石材工程技术研究中心;[郑春英;张进生;王志;张政梅;高胜]高效洁净机械制造教育部重点实验室(山东大学);[郑春英;张进生;王志;张政梅;高胜]山东大学机械工程学院

来源:工具技术,TOOL ENGINEERING,2010,Issue.07,12-16

资源类型:期刊论文

共 13 页, 243 条记录

TOP