按条件检索“540”条记录

已选条件: 数据来源: EI × 数据来源: SCOPUS × 数据来源: CNKI × 数据来源: 万方 × 数据来源: WOS × 数据来源: CSCD × 出版年: 2010 × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
41. Failure analysis of the brittle fracture of a thick-walled 20 steel pipe in an ammonia synthesis unit EI SCOPUS SCIE

作者:Haoxuan Cui;Weiqiang Wang;Aiju Li

作者机构:[Cui, H] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China;[ Wang, W] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China;[ Li, A] Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China, School of Materials Science and Engineering, Shandong University, Jinan 250061, Shandong, China;[ Li, M] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China;[ Xu, S] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China;[ Liu, H] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China

来源:Engineering failure analysis,ENGINEERING FAILURE ANALYSIS,2010,Vol.17,Issue.6,1359-1376

WOS被引数:6

资源类型:期刊论文

WOS:000280885100010

42. Research on material constitutive model at large range of strain and strain rate EI SCOPUS

作者:Fu, Xiu-Li ;Pan, Yong-Zhi ;Ai, Xing ;Wan, Yi

作者机构:[Fu, Xiu-Li ;Pan, Yong-Zhi ] Department of Mechanical Engineering, University of Jinan, Jinan 250022, China;[Ai, Xing ;Wan, Yi ] Department of Mechanical Engineering, Shandong University, Jinan 250061, China

来源:Journal of Harbin Institute of Technology (New Series),2010,Vol.17,Issue.SUPPL. 1,37-40

资源类型:期刊论文

43. Simulation and analysis of aerodynamics for high speed face milling cutters EI SCOPUS SCIE

作者:Ji ChunHui; Liu ZhanQiang; Liu LuNing

作者机构:[Ji, C] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Liu, Z] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Liu, L] School of Mechanical Engineering, Shandong University, Jinan 250061, China

来源:中国科学(技术科学)(英文版),SCIENCE CHINA-TECHNOLOGICAL SCIENCES,2010,Vol.53,Issue.9,2575-2580

WOS被引数:2

资源类型:期刊论文

WOS:000280810100037

44. 晶粒生长过程的相场模型研究进展

作者:周有欣;黄传真;

作者机构:[周有欣;黄传真]山东大学机械工程学院高效洁净机械制造教育部重点实验室

来源:材料导报,2010,Issue.S1,223-226

资源类型:期刊论文

45. Layered structures in ceramic nozzles for improved erosion wear resistance in industrial coal-water-slurry boilers EI SCOPUS SCIE

作者:Deng Jianxin;Yun Dongling;Zhou Houmin

作者机构:[Deng, J] School of Mechanical Engineering, Shandong University, Jinan, 250061 Shandong Province, China;[ Yun, D] School of Mechanical Engineering, Shandong University, Jinan, 250061 Shandong Province, China;[ Zhou, H] School of Mechanical Engineering, Xiangtan University, Xiangtan, 411105 Hunan Province, China;[ Tan, Y] School of Mechanical Engineering, Xiangtan University, Xiangtan, 411105 Hunan Province, China

来源:CERAMICS INTERNATIONAL,CERAMICS INTERNATIONAL,2010,Vol.36,Issue.1,299-306

WOS被引数:2

资源类型:期刊论文

WOS:000273120100043

46. 金刚石圆锯片锯解花岗石切削力及参数优化的实验研究

作者:郑春英;张进生;王志;张政梅;高胜;

作者机构:[郑春英;张进生;王志;张政梅;高胜]山东大学;[郑春英;张进生;王志;张政梅;高胜]山东省石材工程技术研究中心;[郑春英;张进生;王志;张政梅;高胜]高效洁净机械制造教育部重点实验室(山东大学);[郑春英;张进生;王志;张政梅;高胜]山东大学机械工程学院

来源:工具技术,TOOL ENGINEERING,2010,Issue.07,12-16

资源类型:期刊论文

47. 头部多角度的眼睛定位与状态分析 EI CSCD SCOPUS

作者:朱淑亮;王增才;王树梁;刘盛强

作者机构:[朱淑亮] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王增才] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王树梁] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[刘盛强] 中国重型汽车集团有限公司, 济南, 山东 250002, 中国

来源:重庆大学学报. 自然科学版,Chongqing Daxue Xuebao/Journal of Chongqing University,2010,Vol.33,Issue.11,20-26

资源类型:期刊论文

48. 高炉开铁口机的力传递分析及连接套结构优化

作者:杨士岭;张建华;

作者机构:[杨士岭;张建华]山东大学机械工程学院;[杨士岭;张建华]济南钢铁股份有限公司;[杨士岭;张建华]山东大学

来源:工具技术,TOOL ENGINEERING,2010,Issue.12,57-60

资源类型:期刊论文

49. A new ground penetrating radar signal analysis method based on S transform EI SCOPUS

作者:Lang, Weifeng ;Lin, Mingxing

作者机构:[Lang, Weifeng ;Lin, Mingxing ] Mechanical Engineering School, Shandong University, China;[Lang, Weifeng ] Laboratory of High Education, Shandong Jiaotong University, China

会议名称:2nd Conference on Environmental Science and Information Application Technology, ESIAT 2010

会议日期:17 July 2010 through 18 July 2010

来源:2010 2nd Conference on Environmental Science and Information Application Technology, ESIAT 2010,2010,Vol.3,683-686

资源类型:会议论文;期刊论文

50. Chatter Stability Prediction in High Speed Milling Considering Multi-Degree of Freedom CPCI-S EI SCOPUS

作者:Sun, S. S.; Tang, W. X.; Xu, X. Q.

作者机构:[Sun, S. S.; Tang, W. X.; Xu, X. Q.] Shandong Univ, Sch Mech Engn, Jinan, Peoples R China.

会议名称:10th International Conference on Machining and Advanced Manufacturing Technology

会议日期:NOV 07-09, 2009

来源:MACHINING AND ADVANCED MANUFACTURING TECHNOLOGY X,2010,Vol.431-432,373-376

资源类型:会议论文;期刊论文

WOS:000279924200092

51. Quantitative Research for Virtual Mobile Robot Design Cycle based on PERT CPCI-S EI SCOPUS

作者:Wang Jingkun; Ai Xing; Zhang Jinsheng; Chong, Kil To

作者机构:[Wang Jingkun; Ai Xing; Zhang Jinsheng] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg, Minist Educ, Jinan 250061, Peoples R China.; [Chong, Kil To] Chonbuk Natl Univ, Fac Elect & Informat Engn, Jeonju 561756, South Korea.

会议名称:8th International Conference on Mechatronics and Information Technology (ICMIT09)

会议日期:DEC 03-05, 2009

来源:ICMIT 2009: MECHATRONICS AND INFORMATION TECHNOLOGY,2010,Vol.7500

资源类型:会议论文;期刊论文

WOS:000283486400030

52. 济钢1~#1750m~3高炉炉前设备优化改造

作者:杨士岭;张建华;曹学杰;

作者机构:[杨士岭;张建华;曹学杰]山东大学机械工程学院;[杨士岭;张建华;曹学杰]济南钢铁股份有限公司

来源:山东冶金,SHANDONG METALLURGY,2010,Issue.03,38-39

资源类型:期刊论文

53. 基于单片机控制的袖珍电子秤设计

作者:赵振;朱毅;

作者机构:[赵振]济南铁道职业技术学院机械系;[朱毅]山东大学机械工程学院

来源:机电工程技术,MECHANICAL & ELECTRICAL ENGINEERING TECHNOLOGY,2010,Issue.04,85-86+113-114

资源类型:期刊论文

54. 超声振动辅助磨削NdFeB永磁材料磨削力试验研究

作者:张洪丽;张建华;

作者机构:[张洪丽]山东交通学院工程机械系;[张建华]山东大学机械工程学院

来源:机械设计与制造,MACHINERY DESIGN & MANUFACTURE,2010,Issue.05,171-173

资源类型:期刊论文

55. Research on visual elements of web UI design EI SCOPUS

作者:Liu, Heshan ;Ma, Fujun

作者机构:[Liu, Heshan ;Ma, Fujun ] Department of Mechanical Engineering, Shandong University, SDU, Jinan, China

会议名称:2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010

会议日期:17 November 2010 through 19 November 2010

来源:2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010,2010,Vol.1,428-430

资源类型:会议论文;期刊论文

56. Finite element simulation of machining of Ti-6Al-4V alloy with thermodynamical constitutive equation EI SCOPUS SCIE

作者:Shao, Fang; Liu, Zhanqiang; Wan, Yi; Shi, Zhenyu

作者机构:[Shao, Fang; Liu, Zhanqiang; Wan, Yi; Shi, Zhenyu] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Shao, Fang] Binzhou Vacat Coll, Binzhou 256603, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2010,Vol.49,Issue.5-8,431-439

WOS被引数:16

资源类型:期刊论文

WOS:000278625400002

57. 通过标准规避高压钢管应变时效脆化的发生

作者:王威强;李梦丽;崔好选;

作者机构:[王威强]山东大学机械工程学院;[李梦丽]山东省特种设备安全工程技术研究中心;[崔好选]山东大学特种设备安全保障与评价研究中心

来源:压力容器,2010,Issue.11,45-52

资源类型:期刊论文

58. 流体横掠振动圆管湍流状态换热的场协同分析

作者:宿艳彩;葛培琪;闫柯;胡瑞荣;

作者机构:[宿艳彩;葛培琪;闫柯;胡瑞荣]山东大学机械工程学院高效洁净机械制造教育部重点实验室

来源:节能技术,ENERGY CONSERVATION TECHNOLOGY,2010,Issue.05,407-410

资源类型:期刊论文

59. 基于OpenCV的双摄像头活体人脸判定及实时跟踪系统

作者:宋宏嘉;郝计军;王建俊;王静轩;庄飞飞;王锦;

作者机构:[宋宏嘉;郝计军;王建俊;王静轩;庄飞飞;王锦]山东大学信息科学与工程学院;[宋宏嘉;郝计军;王建俊;王静轩;庄飞飞;王锦]山东大学机械工程学院;[宋宏嘉;郝计军;王建俊;王静轩;庄飞飞;王锦]山东大学控制科学与工程学院

来源:数字技术与应用,DIGITAL TECHNOLOGY AND APPLICATION,2010,Issue.07,94-95

资源类型:期刊论文

60. A new image fusion algorithm based on second generation wavelet transform EI

作者:Zhang, Bin ;Zheng, Yong-Guo ;Fang, Wei ;Cui, Li-Min

作者机构:[Zhang, Bin ;Zheng, Yong-Guo ] College of Information Science and Engineering, Shandong University of Science and Technology, SUST, Qingdao, China;[Cui, Li-Min ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, SUST, Qingdao, China;[Fang, Wei ] Emergency Department, Dezhou People's Hospital,DPH, Dezhou, China

来源:2010 2nd International Conference on Computational Intelligence and Natural Computing, CINC 2010,2010,Vol.1,390-393

资源类型:会议论文

共 27 页, 540 条记录

TOP