按条件检索“473”条记录

已选条件: 数据来源: EI × 数据来源: 万方 × 数据来源: CSCD × 出版年: 2010 × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
41. 基于混合法和多打靶法的有限推力航天器协同交会优化 EI CSCD SCOPUS

作者:Pan,Wei;Lu,Changhou;Feng,Weiming;Chen,Fei

作者机构:[潘伟] 山东大学机械学院, 济南, 山东 250061, 中国.;[路长厚] 山东大学机械学院, 济南, 山东 250061, 中国.;[陈菲] 山东大学机械学院, 济南, 山东 250061, 中国.;[冯维明] 山东大学土建学院, 济南, 山东 250061, 中国

来源:固体火箭技术,Guti Huojian Jishu/Journal of Solid Rocket Technology,2010,Vol.33,Issue.6,603-610

资源类型:期刊论文

42. 硬脆材料锯磨裂纹研究现状与降低措施

作者:贺东溥;孟剑锋;

作者机构:[贺东溥]山东大学机械学院;[孟剑锋]山东大学

来源:工具技术,TOOL ENGINEERING,2010,Issue.05,43-45

资源类型:期刊论文

43. Study on the cutting performance of Ti(C, N) based micro/nanometer composite cermet tools EI SCOPUS

作者:Xu, Li-Qiang ;Huang, Chuan-Zhen ;Liu, Han-Lian ;Shi, Yun-Xu

作者机构:[Xu, Li-Qiang ;Shi, Yun-Xu ] School of Mechatronics and Automobile Engineering, Yantai University, Yantai 264005, China;[Huang, Chuan-Zhen ;Liu, Han-Lian ] Centre for Advanced Jet Engineering Technologies(CAJET), School of Mechanical Engineering, Shandong University, Jinnan 250061, China

来源:Journal of Harbin Institute of Technology (New Series),2010,Vol.17,Issue.SUPPL. 1,74-77

资源类型:期刊论文

44. 轴承淬硬钢硬车微进给有限元仿真分析 SCOPUS

作者:王中秋;李剑峰;孙杰;姜峰;

作者机构:[王中秋;李剑峰;孙杰;姜峰]山东大学机械工程学院

来源:武汉理工大学学报,Wuhan Ligong Daxue Xuebao/Journal of Wuhan University of Technology,2010,Vol.32,Issue.2,63-67

资源类型:期刊论文

45. Research on the Stress Intensity Factor of the Crack Inclined across the Interface of Cermet Cladding Parts CPCI-S EI SCOPUS

作者:Yang, Junru; Li, Zhaoqian; Huang, Chuanzhen; Wang, Quanwei

作者机构:[Yang, Junru; Wang, Quanwei] SDUST, Coll Mech & Elect Engn, Qingdao 266510, Peoples R China.; [Yang, Junru] Shandong Univ, Sch Mat Sci & Engn, Jinan 250061, Peoples R China.; [Li, Zhaoqian; Huang, Chuanzhen] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

会议名称:10th International Conference on Machining and Advanced Manufacturing Technology

会议日期:NOV 07-09, 2009

来源:MACHINING AND ADVANCED MANUFACTURING TECHNOLOGY X,2010,Vol.431-432,213-216

WOS被引数:1

资源类型:会议论文;期刊论文

WOS:000279924200053

46. Experimental investigations of tool wear mechanisms in machining 1Cr18Ni9Ti stainless steel CPCI-S EI SCOPUS

作者:Yang, Fazhan; Zhao, Jun; Sun, Chengliang; Meng, Guangyao

作者机构:[Yang, Fazhan; Meng, Guangyao] Qingdao Technol Univ, Sch Mech Engn, Qingdao, Peoples R China.; [Yang, Fazhan; Zhao, Jun] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg MOE, Jinan, Peoples R China.; [Sun, Chengliang] Qingdao Taineng Grp, Qingdao, Peoples R China.

会议名称:International Conference on Manufacturing Science and Engineering (ICMSE 2009)

会议日期:DEC 26-28, 2009

来源:MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5,2010,Vol.97-101,1858-1862

资源类型:会议论文;期刊论文

WOS:000279864701012

47. 涂层刀具扩散层的形成及其热传导分析 EI CSCD SCOPUS

作者:张士军;刘战强

作者机构:[张士军] 山东建筑大学机电工程学院, 济南, 山东 250101, 中国.;[刘战强] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:机械工程学报,Jixie Gongcheng Xuebao/Journal of Mechanical Engineering,2010,Vol.46,Issue.21,194-198

资源类型:期刊论文

48. Tool Wear of PVD Coated Carbide Inserts in High Speed Turning Inconel 718 CPCI-S EI SCOPUS

作者:Song, X. Y.; Zhao, J.

作者机构:[Song, X. Y.; Zhao, J.] Shandong Univ, Sch Mech Engn, MOE, Key Lab High Efficiency & Clean Mech Mfg, Jinan 250061, Peoples R China.

会议名称:International Conference on Advanced Mechanical Engineering (AME 2010)

会议日期:SEP 04-05, 2010

来源:ADVANCED MECHANICAL ENGINEERING, PTS 1 AND 2,2010,Vol.26-28,988-992

资源类型:会议论文;期刊论文

WOS:000303181700199

49. Mobile Robot GPS/DR Integrated Navigation Positioning Technique Research CPCI-S EI SCOPUS

作者:Jingkun, Wang; Zhang, Yuanliang; Li, Bifu; Chong, Kil To

作者机构:[Chong, Kil To] Chonbuk Natl Univ, Elect & Informat Engn Dept, Jeonju, South Korea.; [Jingkun, Wang; Li, Bifu] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg, Minist Educ, Jinan 250061, Peoples R China.; [Zhang, Yuanliang] Sch Mech Engn, Huaihai Inst Technol, Lianyungang, Jiangsu, Peoples R China.; [Zhang, Yuanliang] Chonbuk Natl Univ, Jeonju 561756, South Korea.

会议名称:8th International Conference on Mechatronics and Information Technology (ICMIT09)

会议日期:DEC 03-05, 2009

来源:ICMIT 2009: MECHATRONICS AND INFORMATION TECHNOLOGY,2010,Vol.7500

资源类型:会议论文;期刊论文

WOS:000283486400028

50. 正交微切削中切削力预测模型研究 SCOPUS

作者:吴继华;刘战强;

作者机构:[吴继华;刘战强]山东大学机械工程学院

来源:武汉理工大学学报(交通科学与工程版),Wuhan Ligong Daxue Xuebao (Jiaotong Kexue Yu Gongcheng Ban)/Journal of Wuhan University of Technology (Transportation Science and Engineering),2010,Vol.34,Issue.1,130-133

资源类型:期刊论文

51. 计入空化效应的新型动静压轴承热动力分析 EI CSCD SCOPUS

作者:杨莹;路长厚

作者机构:[杨莹] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[路长厚] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:农业机械学报,Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery,2010,Vol.41,Issue.3,215-218+226

资源类型:期刊论文

52. Research on material constitutive model at large range of strain and strain rate EI SCOPUS

作者:Fu, Xiu-Li ;Pan, Yong-Zhi ;Ai, Xing ;Wan, Yi

作者机构:[Fu, Xiu-Li ;Pan, Yong-Zhi ] Department of Mechanical Engineering, University of Jinan, Jinan 250022, China;[Ai, Xing ;Wan, Yi ] Department of Mechanical Engineering, Shandong University, Jinan 250061, China

来源:Journal of Harbin Institute of Technology (New Series),2010,Vol.17,Issue.SUPPL. 1,37-40

资源类型:期刊论文

53. Simulation of Microstructure Evolution Coupled with Fabrication Temperature for Two-Phase Ceramic Tool Materials CPCI-S EI SCOPUS

作者:Fang, Bin; Huang, Chuanzhen; Xu, Chonghai; Sun, Sheng; Zou, Bin

作者机构:[Fang, Bin; Huang, Chuanzhen; Zou, Bin] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ,CaJET, Jinan 250061, Peoples R China.; [Fang, Bin; Xu, Chonghai] Shandong Inst Light Ind, Sch Mech Engn, Jinan 250100, Peoples R China.; [Sun, Sheng] Shandong Univ, Sch Mat Sci & Engn, Jinan 250061, Peoples R China.

会议名称:10th International Conference on Machining and Advanced Manufacturing Technology

会议日期:NOV 07-09, 2009

来源:MACHINING AND ADVANCED MANUFACTURING TECHNOLOGY X,2010,Vol.431-432,134-137

资源类型:会议论文;期刊论文

WOS:000279924200034

54. 基于有限元的龙门式设备立柱优化设计

作者:刘钢;张进生;王志;

作者机构:[刘钢]山东大学机械工程学院;[张进生]山东省石材工程技术研究中心;[王志]高效洁净机械制造教育部重点实验室(山东大学)

来源:工具技术,TOOL ENGINEERING,2010,Issue.08,24-28

资源类型:期刊论文

55. Study on the hot pressing technology of ZrO2-TiC-Al2O3 nanocomposite ceramic tool and die material SCOPUS EI SCOPUS

作者:Zhao, Shi-Kui ;Xu, Chong-Hai

作者机构:[Zhao, Shi-Kui ;Xu, Chong-Hai ] School of Mechanical Engineering, Shandong Institute of Light Industry, Jinan, China;[Xu, Chong-Hai ] School of Mechanical Engineering, Shandong University, Jinan, China

来源:Journal of Harbin Institute of Technology (New Series),2010,Vol.17,Issue.SUPPL. 1,51-54

资源类型:期刊论文

56. 金刚石圆盘锯锯解系统的分析与研究

作者:谢东朋;张进生;王志;

作者机构:[谢东朋;张进生;王志]山东大学机械工程学院;[谢东朋;张进生;王志]山东省石材工程技术研究中心;[谢东朋;张进生;王志]高效洁净机械制造教育部重点实验室(山东大学);[谢东朋;张进生;王志]山东大学高效洁净机械制造教育部重点实验室

来源:工具技术,TOOL ENGINEERING,2010,Issue.09,33-36

资源类型:期刊论文

57. Study on the dynamics peculiarity of the gasoline mixing with rotary jet system EI SCOPUS

作者:Chen, Song-Ying ;Xie, Fu-Chao ;Qu, Yan-Peng ;Mao, Jun-Jie ;Shi, Guang-Qing

作者机构:[Chen, Song-Ying ;Xie, Fu-Chao ;Qu, Yan-Peng ;Mao, Jun-Jie ;Shi, Guang-Qing ] School of Mechanical Engineering, Shandong University, Jinan 250061, China

来源:Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics,2010,Vol.31,Issue.SUPPL.,229-232

资源类型:期刊论文

58. Nonlocal Stress Theory for Buckling Instability of Nanotubes: New Predictions on Stiffness Strengthening Effects of Nanoscales EI SCOPUS SCIE

作者:C. W. Lim;J. C. Niu;Y. M. Yu

作者机构:[Lim, C.W] Department of Building and Construction, City University of HK, Hong Kong, Hong Kong;[ Niu, J.C] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Yu, Y.M] Department of Building and Construction, City University of HK, Hong Kong, Hong Kong

来源:Journal of computational and theoretical nanoscience,JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE,2010,Vol.7,Issue.10,2104-2111

WOS被引数:37

资源类型:期刊论文

WOS:000280960300041

59. Simulation and Optimal Selection of Pitch Angles Distribution for Variable Pitch Angles Helix End Mills CPCI-S EI SCOPUS

作者:Huang, Panling; Li, Jianfeng; Sun, Jie

作者机构:[Huang, Panling; Li, Jianfeng; Sun, Jie] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

会议名称:9th Asia-Pacific Conference on Materials Processing

会议日期:JUN 07-10, 2010

来源:ADVANCES IN MATERIALS PROCESSING IX,2010,Vol.443,285-290

资源类型:会议论文;期刊论文

WOS:000283804900047

60. 基于CATIA的齿轮装配体的CAE分析

作者:汪宗兵;刘日良;廖希亮;吕志富;

作者机构:[汪宗兵;刘日良;廖希亮;吕志富]山东淄博陆骏电动车有限公司;[汪宗兵;刘日良;廖希亮;吕志富]山东大学机械学院

来源:机械制造与自动化,JIANGSU MACHINE BUILDING & AUTOMATION,2010,Issue.06,103-104

资源类型:期刊论文

共 24 页, 473 条记录

TOP