按条件检索“5,384”条记录

已选条件: 资源类型: 期刊论文 × 资源类型: 会议论文 × 数据来源: EI × 数据来源: CSCD × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
1. Robust fixture design of compliant assembly process based on a support vector regression model EI SCOPUS SCIE

作者:Yu, Kuigang

作者机构:[Yu, Kuigang] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Yu, Kuigang] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.; [Yu, Kuigang] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.103,Issue.1-4,111-126

资源类型:期刊论文

WOS:000475921300010

2. Material Ductile Failure-Based Finite Element Simulations of Chip Serration in Orthogonal Cutting of Titanium Alloy Ti-6Al-4V EI SCOPUS SCIE

作者:Liu, Guoliang; Shah, Suril; Ozel, Tugrul

作者机构:[Liu, Guoliang; Shah, Suril; Ozel, Tugrul] Rutgers State Univ, Mfg & Automat Res Lab, Dept Ind & Syst Engn, Piscataway, NJ 08854 USA.; [Liu, Guoliang] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2019,Vol.141,Issue.4

资源类型:期刊论文

WOS:000460839400018

3. Evaluation of scale effect of micro electrical discharge machining system EI SCOPUS SCIE

作者:Wang, Kan; Zhang, Qinhe; Zhang, Jianhua

作者机构:[Wang, Kan] Shandong Univ, Associated Engn Res Ctr Mech & Mechatron Equipmen, Weihai City 264209, Peoples R China.; [Zhang, Qinhe; Zhang, Jianhua] Shandong Univ, Sch Mech Engn, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.; [Zhang, Qinhe; Zhang, Jianhua] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.

来源:JOURNAL OF MANUFACTURING PROCESSES,2019,Vol.38,174-178

资源类型:期刊论文

WOS:000461409800018

4. Structural Integrity Analysis of Two Over-Temperature Methanation Furnaces EI SCOPUS

作者:Zhang, Ming ;Wang, Weiqiang ;Wang, Pengfei

作者机构:[Zhang, M] School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), 3501 Daxue Road, Jinan, 250353, China;[ Wang, W] School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan, 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, 17923 Jingshi Road, Jinan, 250061, China;[ Wang, P] School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan, 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, 17923 Jingshi Road, Jinan, 250061, China

来源:Journal of Failure Analysis and Prevention,2019,Vol.19,Issue.1,230-236

资源类型:期刊论文

5. Meshfree analysis on dynamic behavior of hard brittle material in abrasive flow machining EI SCOPUS SCIE

作者:Lv, Zhe; Hou, Rongguo; Huang, Chuanzhen; Zhu, Hongtao; Qi, Huan

作者机构:[Lv, Zhe; Hou, Rongguo] Shandong Univ Technol, Sch Mech Engn, Zibo 255000, Peoples R China.; [Huang, Chuanzhen; Zhu, Hongtao] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg, Ctr Adv Jet Engn Technol CaJET,Minist Educ, Jinan 250061, Shandong, Peoples R China.; [Qi, Huan] Zhejiang Univ Technol, Minist Educ, Key Lab Special Purpose Equipment & Adv Proc Tech, Hangzhou 310014, Zhejiang, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.100,Issue.5-8,2021-2030

资源类型:期刊论文

WOS:000458000100074

6. Influence of tool material and geometry on micro-textured surface in radial ultrasonic vibration-assisted turning EI SCOPUS SCIE

作者:Liu, Xianfu; Zhang, Jianhua; Hu, Xiangyi; Wu, Debao

作者机构:[Liu, Xianfu; Zhang, Jianhua; Hu, Xiangyi; Wu, Debao] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ China, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Liu, Xianfu; Zhang, Jianhua; Hu, Xiangyi; Wu, Debao] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2019,Vol.152,545-557

资源类型:期刊论文

WOS:000459837400041

7. Influence of cutting parameters on surface roughness and strain hardening during milling NiTi shape memory alloy EI SCOPUS SCIE

作者:Wang, Guijie; Liu, Zhanqiang; Huang, Weimin; Wang, Bing; Niu, Jintao

作者机构:[Wang, Guijie; Liu, Zhanqiang; Huang, Weimin; Wang, Bing; Niu, Jintao] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Wang, Guijie; Liu, Zhanqiang; Huang, Weimin; Wang, Bing; Niu, Jintao] MOE, Key Natl Demonstrat Ctr Expt Mech Engn Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.102,Issue.5-8,2211-2221

资源类型:期刊论文

WOS:000469002200083

8. Modeling and characteristic analysis of fouling in a wet cooling tower based on wavelet neural networks EI SCIE

作者:Guo, Qianjian; Qi, Xiaoni; Wei, Zheng; Yin, Qiang; Sun, Peng; Guo, Pengjiang; Liu, Jingcheng

作者机构:[Guo, Qianjian; Wei, Zheng; Liu, Jingcheng] Shandong Univ Technol, Coll Mech Engn, 266 West Xincun Rd, Zibo 255049, Peoples R China.; [Qi, Xiaoni; Yin, Qiang; Sun, Peng; Guo, Pengjiang] Shandong Univ Technol, Coll Traff & Vehicle Engn, 266 West Xincun Rd, Zibo 255049, Peoples R China.

来源:APPLIED THERMAL ENGINEERING,2019,Vol.152,907-916

资源类型:期刊论文

WOS:000465058700081

9. 石墨烯纳米片增韧Al_2O_3基纳米复合陶瓷刀具材料 EI CSCD SCOPUS

作者:孟祥龙;衣明东;肖光春;陈照强;许崇海

作者机构:[孟祥龙;衣明东;肖光春;陈照强;许崇海]齐鲁工业大学机械与汽车工程学院.;[孟祥龙;衣明东;肖光春;陈照强;许崇海]齐鲁工业大学山东省高校轻工装备先进制造与测控技术重点实验室.;[孟祥龙;衣明东;肖光春;陈照强;许崇海]山东大学机械工程学院

来源:材料工程,Journal of Materials Engineering,2019,Vol.47,Issue.1,25-31

资源类型:期刊论文

10. Investigation of surface topography and its deterioration resulting from tool wear evolution when dry turning of titanium alloy Ti-6Al-4V EI SCOPUS SCIE

作者:Liang, Xiaoliang; Liu, Zhanqiang; Yao, Gonghou; Wang, Bing; Ren, Xiaoping

作者机构:[Liang, Xiaoliang; Liu, Zhanqiang; Yao, Gonghou; Wang, Bing; Ren, Xiaoping] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Liang, Xiaoliang; Liu, Zhanqiang; Yao, Gonghou; Wang, Bing; Ren, Xiaoping] Key Natl Demonstrat Ctr Expt Mech Engn Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:TRIBOLOGY INTERNATIONAL,2019,Vol.135,130-142

资源类型:期刊论文

WOS:000469157500014

11. Influence of Prior Martensite on Bainite Transformation, Microstructures, and Mechanical Properties in Ultra-Fine Bainitic Steel EI SCOPUS SCIE

作者:Guo, Hui; Feng, Xianying; Zhao, Aimin; Li, Qiang; Ma, Jun

作者机构:[Guo, Hui; Li, Qiang; Ma, Jun] Weifang Univ Sci & Technol, Facil Hort Lab Univ Shandong, Weifang 262700, Peoples R China.; [Guo, Hui; Feng, Xianying] Shandong Univ, Sch Mech Engn, Jinan 250012, Shandong, Peoples R China.; [Zhao, Aimin] Univ Sci & Technol Beijing, Collaborat Innovat Ctr Steel Technol, Beijing 100083, Peoples R China.

来源:MATERIALS,2019,Vol.12,Issue.3

资源类型:期刊论文

WOS:000460768000196

12. Energy harvesting properties of the functionally graded flexoelectric microbeam energy harvesters EI SCOPUS SCIE

作者:Qi, Lu

作者机构:[Qi, Lu] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Qi, Lu] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.

来源:ENERGY,2019,Vol.171,721-730

资源类型:期刊论文

WOS:000461534400058

13. The grinding force modeling and experimental study of ZrO2 ceramic materials in ultrasonic vibration assisted grinding EI SCIE

作者:Yang, Zhichao; Zhu, Lida; Lin, Bin; Zhang, Guixiang; Ni, Chenbing; Sui, Tianyi

作者机构:[Yang, Zhichao; Zhu, Lida; Ni, Chenbing] Northeastern Univ, Sch Mech Engn & Automat, Shenyang 110819, Liaoning, Peoples R China.; [Lin, Bin; Sui, Tianyi] Tianjing Univ, Key Lab Adv Ceram & Machining Technol, Tianjin 300072, Peoples R China.; [Zhang, Guixiang] Shandong Univ Technol, Sch Mech Engn, Zibo 255000, Peoples R China.

来源:CERAMICS INTERNATIONAL,2019,Vol.45,Issue.7,8873-8889

资源类型:期刊论文

WOS:000463688500102

14. A generalized cutting force model for five-axis milling processes EI SCOPUS SCIE

作者:Song, Qinghua; Liu, Zhanqiang; Ju, Ganggang; Wan, Yi

作者机构:[Song, Qinghua; Liu, Zhanqiang; Ju, Ganggang; Wan, Yi] Shandong Univ, Sch Mech Engn, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, 17923 Jingshi Rd, Jinan 250061, Shandong, Peoples R China.

来源:PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2019,Vol.233,Issue.1,3-17

资源类型:期刊论文

WOS:000454115700001

15. Tool wear mechanisms and micro-channels quality in micro-machining of Ti-6Al-4V alloy using the Ti(C7N3)-based cermet micro-mills EI

作者:Wang, Yishun ;Zou, Bin ;Huang, Chuanzhen

作者机构:[Wang, Yishun ;Zou, Bin ;Huang, Chuanzhen ] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan; 250061, China;[Wang, Yishun ;Zou, Bin ;Huang, Chuanzhen ] National Demonstration Center for Experimental Mechanical Engineering Education, (Shandong University), China;[Wang, Yishun ;Zou, Bin ;Huang, Chuanzhen ] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China

来源:Tribology International,201960-76

资源类型:期刊论文

16. 基于改进S变换和ICA的相关源分离方法 EI CSCD

作者:韦成龙; 周以齐; 李瑞; 于刚

作者机构:[韦成龙]山东大学机械工程学院, 济南, 山东 250061, 中国;[周以齐]山东大学机械工程学院, 济南, 山东 250061, 中国;[李瑞]山东大学机械工程学院, 济南, 山东 250061, 中国;[于刚]济南大学自动化与电气工程学院, 济南, 山东 250061, 中国.

来源:振动、测试与诊断,Journal of Vibration, Measurement and Diagnosis,2019,Vol.39,Issue.4,852-859+910

资源类型:期刊论文

17. 钛合金表面激光熔覆技术的研究进展 CSCD SCOPUS

作者:刘家奇; 宋明磊; 陈传忠; 于慧君

作者机构:[刘家奇]山东大学机械工程学院;;山东大学;;山东大学机械工程国家级实验教学示范中心, ;;高效洁净机械制造教育部重点实验室;;, 济南;;济南;;济南, 山东;;山东;;山东 250061;;250061;;250061, 中国;[于慧君]山东大学机械工程学院;;山东大学;;山东大学机械工程国家级实验教学示范中心, ;;高效洁净机械制造教育部重点实验室;;, 济南;;济南;;济南, 山东;;山东;;山东 250061;;250061;;250061, 中国;[宋明磊]山东大学材料科学与工程学院, 济南, 山东 250061, 中国;[陈传忠]山东大学材料科学与工程学院, 济南, 山东 250061, 中国.

来源:金属热处理,Jinshu Rechuli/Heat Treatment of Metals,2019,Vol.44,Issue.5,87-96

资源类型:期刊论文

18. 考虑产品故障特征的目标选择性拆卸序列规划 EI CSCD SCOPUS

作者:杨得玉; 徐志刚; 朱建峰; 苏开远; 刘维民

作者机构:[杨得玉]山东大学机械工程学院, 济南, 山东 250061, 中国;[徐志刚]山东大学机械工程学院, 济南, 山东 250061, 中国;[朱建峰]山东大学机械工程学院, 济南, 山东 250061, 中国;[苏开远]山东大学机械工程学院, 济南, 山东 250061, 中国;[刘维民]山东大学深圳研究院, 深圳, 广东 518057, 中国.

来源:哈尔滨工业大学学报,Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology,2019,Vol.51,Issue.7,160-170

资源类型:期刊论文

19. 考虑尺度效应的微振动能量采集器建模 EI CSCD SCOPUS

作者:李创业; 霍睿; 王伟科; 赵辰

作者机构:[李创业]山东大学机械工程学院;;山东大学, ;;高效洁静机械制造教育部重点实验室, 济南;;济南, ;;山东 250061;;250061;[霍睿]山东大学机械工程学院;;山东大学, ;;高效洁静机械制造教育部重点实验室, 济南;;济南, ;;山东 250061;;250061;[王伟科]山东大学机械工程学院;;山东大学, ;;高效洁静机械制造教育部重点实验室, 济南;;济南, ;;山东 250061;;250061;[赵辰]中国人民解放军32145部队机要科, 新乡, 河南 453000, 中国.

来源:振动与冲击,Zhendong yu Chongji/Journal of Vibration and Shock,2019,Vol.38,Issue.12,148-152

资源类型:期刊论文

20. 高温高应变速率下H13钢的动态再结晶行为 CSCD SCOPUS

作者:张静;张松;李斌训;陈杰

作者机构:[张静;张松;李斌训;陈杰]山东大学机械工程学院高效洁净机械制造教育部重点实验室,山东济南250061,中国.;[张静;张松;李斌训;陈杰]山东大学机械工程国家级实验教学示范中心,山东济南250061,中国

来源:金属热处理,Jinshu Rechuli/Heat Treatment of Metals,2019,Vol.44,Issue.4,39-45

资源类型:期刊论文

共 270 页, 5,384 条记录

TOP