按条件检索“276”条记录

已选条件: 数据来源: EI × 数据来源: CNKI × 出版年: 2014 × 机构: 机械工程学院 × 文献类型: 期刊论文 × 文献类型: proceedingspaper ×
导出
  • 排序
  • 显示
81. The optimization of slotting based on the power drive-through rack CPCI-S EI SCOPUS

作者:Yang, Shuai; Shi, Mengzhu; Zhang, Qiang; Yu, Yang; Zhou, Yamei; Li, Xueying

作者机构:[Yang, Shuai; Shi, Mengzhu; Zhang, Qiang; Zhou, Yamei; Li, Xueying] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ, Jinan 250061, Peoples R China.; [Yu, Yang] Dalian vocat Tech Coll, Sch automobile Engn, Dalian 116000, Peoples R China.

会议名称:2nd International Conference on Applied Mechanics and Materials (ICAMM 2013)

会议日期:NOV 23-24, 2013

来源:APPLIED MECHANICS AND MATERIALS II, PTS 1 AND 2,2014,Vol.477-478,1537-1540

资源类型:会议论文;期刊论文

WOS:000337852700301

82. 滚压工艺对EA4T车轴表面质量完整性的影响及预测模型建立 CSCD

作者:于鑫;孙杰;李世涛;李剑峰

作者机构:[于鑫] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[孙杰] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[李剑峰] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[李世涛] 南车青岛四方机车车辆股份有限公司, 青岛, 山东 266111, 中国

来源:中国表面工程,China Surface Engineering,2014,Vol.27,Issue.5,87-95

资源类型:期刊论文

83. Numerical simulation ultrahigh waterjet (WJ) flow field with the high-frequency velocity vibration at the nozzle inlet EI SCOPUS SCIE

作者:Hou, Rongguo; Huang, Chuanzhen; Zhu, Hongtao

作者机构:[Hou, Rongguo; Huang, Chuanzhen; Zhu, Hongtao] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ, CAJET,Sch Mech Engn, Jinan 250061, Peoples R China.; [Hou, Rongguo] Shandong Univ Technol, Sch Mech Engn, Zibo 255049, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2014,Vol.71,Issue.5-8,1087-1092

WOS被引数:7

资源类型:期刊论文

WOS:000331985000024

84. 基于ZigBee的高压开关SF_6气体泄漏监测系统设计

作者:续文浩;宿筱;

作者机构:[续文浩]山东大学机械工程学院;[宿筱]山东理工大学电气与电子工程学院

来源:自动化与仪器仪表,Automation & Instrumentation,2014,Issue.01,59-61

资源类型:期刊论文

85. A STEP Compliant Framework for Cutting Force Prediction for NC Turning Operations CPCI-S EI SCOPUS

作者:Liu, Riliang; Zhu, Haiguang

作者机构:[Liu, Riliang; Zhu, Haiguang] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

会议名称:4th International Conference on Advances in Materials and Manufacturing (ICAMMP 2013)

会议日期:DEC 18-19, 2013

来源:ENGINEERING SOLUTIONS FOR MANUFACTURING PROCESSES IV, PTS 1 AND 2,2014,Vol.889-890,1009-1013

资源类型:会议论文;期刊论文

WOS:000339125200199

86. Progress in Surface Corrosion-Resistance Coatings of Titanium and Its Alloys CPCI-S EI SCOPUS

作者:Yu, Huijun; Yang, Han; Chen, Chuanzhong

作者机构:[Yu, Huijun] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Yang, Han; Chen, Chuanzhong] Shandong Univ, Sch Mat Sci & Engn, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Shandong, Peoples R China.

会议名称:4th Annual Meeting on Testing and Evaluation of Inorganic Materials

会议日期:JUN 07-09, 2013

来源:TESTING AND EVALUATION OF INORGANIC MATERIALS IV,2014,Vol.591,172-175

WOS被引数:1

资源类型:会议论文;期刊论文

WOS:000336552700038

87. Effect of fiber treatment/starch plasticization on structure and mechanical properties of biomass cushion packaging material CPCI-S EI SCOPUS

作者:Li, Fang-yi; Guan, Kai-kai; Liu, Peng; Li, Jian-feng; Li, Gang

作者机构:[Li, Fang-yi; Guan, Kai-kai; Liu, Peng; Li, Jian-feng] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Li, Gang] Shandong Kerui Holding Grp Co LTD, Dongying 257067, Peoples R China.

会议名称:8th China National Conference on Functional Materials and Applications (NCFMA 2013)

会议日期:AUG 23-26, 2013

来源:EIGHTH CHINA NATIONAL CONFERENCE ON FUNCTIONAL MATERIALS AND APPLICATIONS,2014,Vol.873,669-675

资源类型:会议论文;期刊论文

WOS:000336337000107

88. 产品装配体模型的空间结构相似性检索方法 EI SCOPUS

作者:伍英杰;高琦;

作者机构:[伍英杰]山东大学机械工程学院;[高琦]高效洁净机械制造教育部重点实验室(山东大学)

来源:计算机辅助设计与图形学学报,Jisuanji Fuzhu Sheji Yu Tuxingxue Xuebao/Journal of Computer-Aided Design and Computer Graphics,2014,Vol.26,Issue.1,113-120

资源类型:期刊论文

89. Investigation on delamination morphology during drilling composite laminates EI SCOPUS SCIE

作者:Wang, Haijin; Sun, Jie; Li, Jianfeng; Li, Weidong

作者机构:[Wang, Haijin; Sun, Jie; Li, Jianfeng] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Li, Weidong] CAC Chengdu Aircraft Ind Grp Co Ltd, Chengdu 610092, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2014,Vol.74,Issue.1-4,257-266

WOS被引数:10

资源类型:期刊论文

WOS:000340675500022

90. ECG quality assessment based on a kernel support vector machine and genetic algorithm with a feature matrix

作者:Ya-tao ZHANG;Cheng-yu LIU;Shou-shui WEI;Chang-zhi WEI;Fei-fei LIU;

作者机构:[Ya-tao ZHANG;Cheng-yu LIU;Shou-shui WEI;Chang-zhi WEI;Fei-fei LIU]School of Control Science and Engineering, Shandong University;[Ya-tao ZHANG;Cheng-yu LIU;Shou-shui WEI;Chang-zhi WEI;Fei-fei LIU]School of Mechanical, Electrical & Information Engineering, Shandong University;[Ya-tao ZHANG;Cheng-yu LIU;Shou-shui WEI;Chang-zhi WEI;Fei-fei LIU]Institute of Cellular Medicine, Newcastle University

来源:Journal of Zhejiang University-Science C(Computers & Electronics),2014,Issue.07,564-573

资源类型:期刊论文

91. 双层桨搅拌假塑性流体混合特性的数值模拟 CSCD SCOPUS

作者:栾德玉;段虎;周慎杰;陈颂英

作者机构:[栾德玉] 青岛科技大学机电工程学院, 青岛, 山东 266061, 中国.;[段虎] 青岛科技大学机电工程学院, 青岛, 山东 266061, 中国.;[周慎杰] 山东大学机电工程学院, 济南, 山东 250061, 中国.;[陈颂英] 山东大学机电工程学院, 济南, 山东 250061, 中国

来源:化学工程,Huaxue Gongcheng/Chemical Engineering (China),2014,Vol.42,Issue.3,39-43

资源类型:期刊论文

92. 跨接双联斜齿轮非线性振动及功率分流特性研究

作者:杨富春;

作者机构:[杨富春]山东大学机械工程学院

来源:新型工业化,2014,Issue.10,53-61

资源类型:期刊论文

93. An Experimental Investigation of Cutting Forces in Hard Milling of H13 Steel under Different Cooling/Lubrication Conditions CPCI-S EI SCOPUS

作者:Zhang, Song; Li, Jianfeng; Lv, Honggang; Chen, Weidong

作者机构:[Zhang, Song; Li, Jianfeng; Lv, Honggang] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Zhang, Song; Li, Jianfeng; Lv, Honggang] Shandong Univ, Key Lab High Efficiency & Clean Mech Manfacture, Minist Educ, Jinan, Peoples R China.; [Chen, Weidong] Shandong Transport Vocat Coll, Weifang 261201, Peoples R China.

会议名称:12th Conference on Machining and Advanced Manufacturing Technology

会议日期:JUL 24-27, 2013

来源:ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY XII,2014,Vol.589-590,13-18

资源类型:会议论文;期刊论文

WOS:000336075100003

94. The Motion Attitude Analysis of High-speed Tracked Vehicle Climbing Over Vertical Wall CPCI-S EI SCOPUS

作者:Chen Ning; Han Yunpeng; Liu Peipei; Yang Shuai

作者机构:[Chen Ning; Han Yunpeng; Liu Peipei; Yang Shuai] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

会议名称:3rd International Conference on Materials Science and Engineering (ICMSE 2014)

会议日期:JAN 24-26, 2014

来源:MATERIAL SCIENCE AND ADVANCED TECHNOLOGIES IN MANUFACTURING,2014,Vol.852,515-519

资源类型:会议论文;期刊论文

WOS:000336633800101

95. On critical conditions for chip transformation from continuous to serrated in high-speed machining CPCI-S EI SCOPUS

作者:Su, Guosheng; Liu, Zhanqiang

作者机构:[Su, Guosheng] Shandong Polytech Univ, Sch Mech & Automot Engn, Jinan 250353, Shandong, Peoples R China.; [Liu, Zhanqiang] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

会议名称:12th Conference on Machining and Advanced Manufacturing Technology

会议日期:JUL 24-27, 2013

来源:ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY XII,2014,Vol.589-590,232-237

资源类型:会议论文;期刊论文

WOS:000336075100042

96. 基于切削力与振动特性钛合金铣削工艺参数研究

作者:贾兴民;李剑峰;孙杰;姜振喜;

作者机构:[贾兴民;李剑峰;孙杰;姜振喜]山东大学机械工程学院;[贾兴民;李剑峰;孙杰;姜振喜]山东大学高效洁净机械制造教育部重点实验室

来源:机械设计与制造,2014,Issue.12,204-208

资源类型:期刊论文

97. Effect of Different Machining Parameters on time-dependent flatness CPCI-S EI SCOPUS

作者:Yi, Wei; Jiang, Zhaoliang; Li, Zhi

作者机构:[Yi, Wei; Jiang, Zhaoliang] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Yi, Wei] Shandong Univ, Engn Training Ctr, Jinan 250002, Peoples R China.; [Jiang, Zhaoliang] Shandong Univ, Minist Educ, Key Lab High efficiency & Clean Mech Mfg, Jinan 250061, Peoples R China.; [Li, Zhi] Qilu Univ Technol, Sch Mech Automot Engn, Jinan 250353, Peoples R China.

会议名称:4th International Conference on Applied Mechanics, Materials and Manufacturing (ICAMMM)

会议日期:AUG 23-24, 2014

来源:APPLIED MECHANICS, MATERIALS AND MANUFACTURING IV,2014,Vol.670-671,502-505

WOS被引数:1

资源类型:会议论文;期刊论文

WOS:000348385100101

98. 基于多属性特性检索与推理的产品MFBS本体映射 CSCD

作者:陈继文;杨红娟;于复生;王晓伟;张进生

作者机构:[陈继文] 山东建筑大学机电工程学院, 济南, 山东 250101, 中国.;[于复生] 山东建筑大学机电工程学院, 济南, 山东 250101, 中国.;[王晓伟] 山东建筑大学机电工程学院, 济南, 山东 250101, 中国.;[杨红娟] 山东建筑大学信息与电气工程学院, 济南, 山东 250101, 中国.;[张进生] 山东大学机械工程学院, 济南, 山东 250062, 中国

来源:机械设计与研究,Machine Design and Research,2014,Vol.30,Issue.3,8-14

资源类型:期刊论文

99. Study on the machined surface geometry generated by multi-axis ball end milling process CPCI-S EI SCOPUS

作者:Chen Xiaoxiao; Zhao Jun; Dong Yongwang; Liu Shuai; Zhao Jiabang

作者机构:[Chen Xiaoxiao; Zhao Jun; Dong Yongwang; Liu Shuai; Zhao Jiabang] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg, MOE, Jinan 250061, Peoples R China.

会议名称:15th International Manufacturing Conference in China

会议日期:OCT 16-18, 2013

来源:ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XV,2014,Vol.770,370-375

资源类型:会议论文;期刊论文

WOS:000336633400078

100. A new method to evaluate the machinability of difficult-to-cut materials EI SCOPUS SCIE

作者:Wang, Xiangyu; Huang, Chuanzhen; Zou, Bin; Liu, Hanlian; Zhu, Hongtao; Wang, Jun

作者机构:[Wang, Xiangyu; Huang, Chuanzhen; Zou, Bin; Liu, Hanlian; Zhu, Hongtao; Wang, Jun] Shandong Univ, Sch Mech Engn, Ctr Adv Jet Engn Technol CaJET, Jinan 250061, Peoples R China.; [Wang, Xiangyu; Huang, Chuanzhen; Zou, Bin; Liu, Hanlian; Zhu, Hongtao; Wang, Jun] Shandong Univ, Key Lab High Efficiency & Clean Mech Mfg, Minist Educ, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2014,Vol.75,Issue.1-4,91-96

WOS被引数:5

资源类型:期刊论文

WOS:000343722400008

共 14 页, 276 条记录

TOP