按条件检索“7,421”条记录

已选条件: 数据来源: EI × 数据来源: CNKI × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
1. 1SZL-420型智能深松整地联合作业机的设计与试验

作者:沈景新;焦伟;孙永佳;王钦祥;孙宜田;李青龙;陈刚

作者机构:[沈景新;焦伟;孙永佳;王钦祥;孙宜田;李青龙;陈刚]山东省农业机械科学研究院.;[沈景新;焦伟;孙永佳;王钦祥;孙宜田;李青龙;陈刚]山东大学机械工程学院

来源:农机化研究,2020,Issue.02,85-90

资源类型:期刊论文

2. 基于割台升降系统电液比例多路阀特性研究

作者:张振华;李瑞川;杨俊茹;徐继康;刘延俊;

作者机构:[张振华]山东科技大学机械电子工程学院,中国.;[李瑞川]山东海卓电液控制工程技术研究院,中国.;[杨俊茹]日照海卓液压有限公司,中国.;[徐继康]山东大学机械工程学院,中国.;[刘延俊]山东大学海洋研究院,中国

来源:农机化研究,2020,Issue.01,31-36

资源类型:期刊论文

3. A hybrid multi-objective optimization approach for energy-absorbing structures in train collisions EI SCOPUS SCIE

作者:Zhang, Honghao; Peng, Yong; Hou, Lin; Tian, Guangdong; Li, Zhiwu

作者机构:[Zhang, Honghao; Peng, Yong; Hou, Lin] Cent S Univ, Sch Traff & Transportat Engn, Key Lab Traff Safety Track, Minist Educ, Changsha 410000, Hunan, Peoples R China.; [Zhang, Honghao; Peng, Yong] Cent S Univ, Joint Int Res Lab Key Technol Rail Traff Safety, Changsha 410000, Hunan, Peoples R China.; [Hou, Lin] Cent S Univ, Natl & Local Joint Engn Res Ctr Safety Technol Ra, Changsha 410000, Hunan, Peoples R China.; [Tian, Guangdong] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Li, Zhiwu] Macau Univ Sci & Technol, Inst Syst Engn, Taipa 999078, Macao, Peoples R China.; [Li, Zhiwu] Xidian Univ, Sch Electromech Engn, Xian 710071, Shaanxi, Peoples R China.

来源:INFORMATION SCIENCES,2019,Vol.481,491-506

WOS被引数:1

资源类型:期刊论文

WOS:000459846300031

4. Energy harvesting properties of the functionally graded flexoelectric microbeam energy harvesters EI SCOPUS SCIE

作者:Qi, Lu

作者机构:[Qi, Lu] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Qi, Lu] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.

来源:ENERGY,2019,Vol.171,721-730

资源类型:期刊论文

WOS:000461534400058

5. 超临界流体染色及其装备研究(四)

作者:瞿德浩;王威强;孙发玉;胡德栋;袁淑英

作者机构:[瞿德浩;王威强;孙发玉;胡德栋;袁淑英]山东大学机械工程学院山大鲁南超临界流体技术研究所.;[瞿德浩;王威强;孙发玉;胡德栋;袁淑英]青岛科技大学机电工程学院

来源:印染,2019,Issue.16,47-50

资源类型:期刊论文

6. A comparative study on uniaxial tensile property calculation models in spherical indentation tests (SITs) EI SCOPUS SCIE

作者:Zhang, Tairui; Wang, Shang; Wang, Weiqiang

作者机构:[Zhang, Tairui; Wang, Shang; Wang, Weiqiang] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Zhang, Tairui; Wang, Shang; Wang, Weiqiang] Engn & Technol Res Ctr Special Equipment Safety S, Jinan 250061, Shandong, Peoples R China.; [Zhang, Tairui; Wang, Shang; Wang, Weiqiang] Res Ctr Safety Guarantee & Assessment Special Equ, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2019,Vol.155,159-169

资源类型:期刊论文

WOS:000468721800013

7. Evaluation of specific cutting energy considering effects of cutting tool geometry during micro-machining process EI SCOPUS SCIE

作者:Cui, P.; Shi, Z. Y.; Li, X.; Duan, N. M.

作者机构:[Cui, P.; Shi, Z. Y.; Li, X.; Duan, N. M.] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Cui, P.; Shi, Z. Y.; Li, X.; Duan, N. M.] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.102,Issue.5-8,1127-1139

资源类型:期刊论文

WOS:000469002200007

8. CNN特征与BOF相融合的水下目标识别算法 CSCD

作者:权稳稳; 林明星

作者机构:[权稳稳]山东大学机械工程学院, 济南, 山东 250061, 中国;[林明星]山东大学机械工程学院, 济南, 山东 250061, 中国.

来源:山东大学学报. 工学版,Journal of Shandong University. Engineering Science,2019,Vol.49,Issue.1,107-113

资源类型:期刊论文

9. 开放的设计=更多的可能

作者:王震亚;

作者机构:[王震亚]山东大学机械工程学院,中国

来源:设计,2019,Issue.18,64-68

资源类型:期刊论文

10. 基于遗传算法的一对一与多行设施布置设计 CSCD

作者:于俊甫; 于珍; 魏连兴

作者机构:[于俊甫]山东大学机械工程学院, 济南, 山东 250061, 中国;[于珍]山东大学机械工程学院, 济南, 山东 250061, 中国;[魏连兴]山东大学机械工程学院, 济南, 山东 250061, 中国.

来源:现代制造工程,Modern Manufacturing Engineering,2019,Issue.8,108-113

资源类型:期刊论文

11. Influence of surface integrity on fatigue behavior of Inconel 718 and Ti6Al4V workpieces with CBN electroplated wheel EI SCIE

作者:Li, Xun; Wang, Yixuan; Xu, Rufeng; Yang, Shenliang; Guan, Chunming; Zhou, Yongxin

作者机构:[Li, Xun; Wang, Yixuan; Yang, Shenliang; Guan, Chunming] Beihang Univ, Sch Mech Engn & Automat, Beijing 100083, Peoples R China.; [Xu, Rufeng; Zhou, Yongxin] Shandong Univ Technol, Sch Mech Engn, Zibo 255000, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.102,Issue.5-8

资源类型:期刊论文

WOS:000469002200095

12. ZL109硅铝合金车削加工表面质量研究

作者:孙虎;李安海;周咏辉;侯冠明;

作者机构:[孙虎]山东大学高效洁净机械制造教育部重点实验室,中国.;[李安海]山东大学机械工程学院,中国.;[周咏辉]高效洁净机械制造教育部重点实验室,中国.;[侯冠明]机械工程国家级试验教学示范中心(山东大学),中国

来源:工具技术,2019,Issue.04,6-11

资源类型:期刊论文

13. Optimum selection of tool materials for machining of high-strength steels based on fuzzy comprehensive evaluation method EI SCOPUS SCIE

作者:Xu, Qingzhong; Zhao, Jun; Ai, Xing; Huang, Weimin; Wang, Guijie

作者机构:[Xu, Qingzhong; Zhao, Jun; Ai, Xing; Huang, Weimin; Wang, Guijie] Shandong Univ, Sch Mech Engn, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2019,Vol.233,Issue.1,145-153

资源类型:期刊论文

WOS:000454115700013

14. Surface quality evaluation of single crystal 4H-SiC wafer machined by hybrid laser-waterjet: Comparing with laser machining EI SCOPUS SCIE

作者:Feng, Shaochuan; Huang, Chuanzhen; Wang, Jun; Jia, Zhixin

作者机构:[Feng, Shaochuan; Jia, Zhixin] Univ Sci & Technol Beijing, Sch Mech Engn, Beijing 100083, Peoples R China.; [Huang, Chuanzhen] Shandong Univ, Sch Mech Engn, Minist Educ, Ctr Adv Jet Engn Technol CaJET,Key Lab High Effic, Jinan 250061, Shandong, Peoples R China.; [Wang, Jun] UNSW, Sch Mech & Mfg Engn, Sydney, NSW 2052, Australia.

来源:MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING,2019,Vol.93,238-251

资源类型:期刊论文

WOS:000457727300029

15. 矿物复合材料机床支承件动静态特性研究

作者:田昆;张松;李剑峰;范磊;牛春峰

作者机构:[田昆;张松;李剑峰;范磊;牛春峰]山东大学机械工程学院高效洁净机械制造教育部重点实验室.;[田昆;张松;李剑峰;范磊;牛春峰]山东永华机械有限公司

来源:制造技术与机床,2019,Issue.04,106-111

资源类型:期刊论文

16. Ontology-Based Noise Source Identification and Key Feature Selection: A Case Study on Tractor Cab EI SCOPUS SCIE

作者:Han, Su; Zhou, Yiqi; Chen, Yanzhao; Wei, Chenglong; Li, Rui; Zhu, Bo

作者机构:[Han, Su; Zhou, Yiqi; Wei, Chenglong; Li, Rui] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Han, Su; Zhou, Yiqi; Wei, Chenglong; Li, Rui] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Chen, Yanzhao] Qilu Univ Technol, Sch Mech & Automot Engn, Shandong Acad Sci, Jinan, Shandong, Peoples R China.; [Zhu, Bo] Shandong Univ, Sch Mat Sci & Engn, Jinan 250000, Shandong, Peoples R China.

来源:SHOCK AND VIBRATION,2019,Vol.2019

资源类型:期刊论文

WOS:000459099400001

17. 视觉SLAM中图像特征点提取与匹配算法研究 CSCD

作者:陈庆伟; 李民东; 罗川; 周军; 皇攀凌; 李蕾

作者机构:[陈庆伟]山东大学机械工程学院, 济南, 山东 250061, 中国;[李民东]山东大学机械工程学院, 济南, 山东 250061, 中国;[罗川]山东大学机械工程学院, 济南, 山东 250061, 中国;[周军]山东大学, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国;[皇攀凌]山东大学, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国;[李蕾]齐鲁工业大学(山东省科学院)机械与汽车工程学院, 济南, 山东 250353, 中国.

来源:现代制造工程,Modern Manufacturing Engineering,2019,Issue.10,135-139+134

资源类型:期刊论文

18. 微织构对钢制导轨表面摩擦性能的影响

作者:张赟;邓建新;岳鸿志;李学木;

作者机构:[张赟;邓建新;岳鸿志;李学木]山东大学机械工程学院,中国

来源:制造技术与机床,2019,Issue.11,17-23

资源类型:期刊论文

19. A Data-Driven-Based Wavelet Support Vector Approach for Passenger Flow Forecasting of the Metropolitan Hub EI SCOPUS SCIE

作者:Tang, Ming; Li, Zhiwu; Tian, Guangdong

作者机构:[Tang, Ming; Tian, Guangdong] Jilin Univ, Transportat Coll, Changchun 130022, Jilin, Peoples R China.; [Tang, Ming] Jilin Univ, Sch Management, Changchun 130022, Jilin, Peoples R China.; [Li, Zhiwu] Macau Univ Sci & Technol, Inst Syst Engn, Macau 999078, Peoples R China.; [Li, Zhiwu] Xidian Univ, Sch Electromech Engn, Xian 710071, Shaanxi, Peoples R China.; [Tian, Guangdong] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:IEEE ACCESS,2019,Vol.7,7176-7183

资源类型:期刊论文

WOS:000456771400001

20. A helical interpolation precision truing and error compensation for arc-shaped diamond grinding wheel EI SCOPUS SCIE

作者:Zhu, Jiahao; Yao, Peng; Wang, Wei; Huang, Chuanzhen; Zhu, Hongtao; Zou, Bin; Liu, Hanlian

作者机构:[Zhu, Jiahao; Yao, Peng; Huang, Chuanzhen; Zhu, Hongtao; Zou, Bin; Liu, Hanlian] Shandong Univ, Sch Mech Engn, Ctr Adv Jet Engn Technol CaJET, Jinan 250061, Shandong, Peoples R China.; [Zhu, Jiahao; Yao, Peng; Huang, Chuanzhen; Zhu, Hongtao; Zou, Bin; Liu, Hanlian] Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.; [Wang, Wei] China Univ Petr East China, Coll Mechan & Elect Engn, Qingdao 266580, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.100,Issue.1-4,167-177

资源类型:期刊论文

WOS:000455946000015

共 372 页, 7,421 条记录

TOP