按条件检索“6,353”条记录

已选条件: 数据来源: EI × 数据来源: 万方 × 数据来源: CSSCI × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
1. Surface quality evaluation of single crystal 4H-SiC wafer machined by hybrid laser-waterjet: Comparing with laser machining EI SCOPUS SCIE

作者:Feng, Shaochuan; Huang, Chuanzhen; Wang, Jun; Jia, Zhixin

作者机构:[Feng, Shaochuan; Jia, Zhixin] Univ Sci & Technol Beijing, Sch Mech Engn, Beijing 100083, Peoples R China.; [Huang, Chuanzhen] Shandong Univ, Sch Mech Engn, Minist Educ, Ctr Adv Jet Engn Technol CaJET,Key Lab High Effic, Jinan 250061, Shandong, Peoples R China.; [Wang, Jun] UNSW, Sch Mech & Mfg Engn, Sydney, NSW 2052, Australia.

来源:MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING,2019,Vol.93,238-251

资源类型:期刊论文

WOS:000457727300029

2. A dynamic parameter identification method of industrial robots considering joint elasticity EI SCOPUS SCIE

作者:Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao

作者机构:[Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS,2019,Vol.16,Issue.1

资源类型:期刊论文

WOS:000458755700001

3. Investigation on the milling performance of amputating clamping supports for machining with industrial robot EI SCOPUS SCIE

作者:Zhang, Yiran; Guo, Kai; Sun, Jie

作者机构:[Zhang, Yiran; Guo, Kai; Sun, Jie] Shandong Univ, Res Ctr Aeronaut Component Mfg Technol & Equipmen, Jinan 250061, Shandong, Peoples R China.; [Zhang, Yiran; Guo, Kai; Sun, Jie] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech, Minist Educ, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.102,Issue.9-12,3573-3586

资源类型:期刊论文

WOS:000469060700060

4. A comparison of TIG-MIG hybrid welding with conventional MIG welding in the behaviors of arc, droplet and weld pool EI SCOPUS SCIE

作者:Zong, Ran; Chen, Ji; Wu, Chuansong

作者机构:[Zong, Ran] Shandong Univ Technol, Sch Mech Engn, 266 Xincun Rd, Zibo 255000, Peoples R China.; [Chen, Ji; Wu, Chuansong] Shandong Univ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Shandong, Peoples R China.

来源:JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2019,Vol.270,345-355

资源类型:期刊论文

WOS:000468712800031

5. Inter-sample output predictor based sampled-data ADRC supporting high precision control of VCM servo systems EI SCOPUS SCIE

作者:Tian, Chuan; Yan, Peng; Zhang, Zhen

作者机构:[Tian, Chuan; Yan, Peng] Beihang Univ, Sch Automat Sci & Elect Engn, Xueyuan Rd 37, Beijing 100191, Peoples R China.; [Yan, Peng] Shandong Univ, Minist Educ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg, 17923 Jingshi Rd, Jinan 250061, Shandong, Peoples R China.; [Zhang, Zhen] Tsinghua Univ, Dept Mech Engn, Beijing 100084, Peoples R China.

来源:CONTROL ENGINEERING PRACTICE,2019,Vol.85,138-148

资源类型:期刊论文

WOS:000463312400014

6. Translocation, biotransformation-related degradation, and toxicity assessment of polyvinylpyrrolidone-modified 2H-phase nano-MoS2 EI SCIE

作者:Mei, Linqiang; Zhang, Xiao; Yin, Wenyan; Dong, Xinghua; Guo, Zhao; Fu, Wenhui; Su, Chunjian; Gu, Zhanjun; Zhao, Yuliang

作者机构:[Mei, Linqiang; Su, Chunjian] Shandong Univ Sci & Technol, Coll Mech & Elect Engn, Qingdao 266590, Shandong, Peoples R China.; [Mei, Linqiang; Zhang, Xiao; Yin, Wenyan; Dong, Xinghua; Guo, Zhao; Fu, Wenhui; Gu, Zhanjun; Zhao, Yuliang] Chinese Acad Sci, Key Lab Biomed Effects Nanomat & Nanosafety, Inst High Energy Phys, Beijing 100049, Peoples R China.; [Mei, Linqiang; Zhang, Xiao; Yin, Wenyan; Dong, Xinghua; Guo, Zhao; Fu, Wenhui; Gu, Zhanjun; Zhao, Yuliang] Chinese Acad Sci, CAS Ctr Excellence Nanosci, Natl Ctr Nanosci & Technol China, Beijing 100049, Peoples R China.

来源:NANOSCALE,2019,Vol.11,Issue.11,4767-4780

资源类型:期刊论文

WOS:000462669600011

7. Ontology-Based Noise Source Identification and Key Feature Selection: A Case Study on Tractor Cab EI SCOPUS SCIE

作者:Han, Su; Zhou, Yiqi; Chen, Yanzhao; Wei, Chenglong; Li, Rui; Zhu, Bo

作者机构:[Han, Su; Zhou, Yiqi; Wei, Chenglong; Li, Rui] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Han, Su; Zhou, Yiqi; Wei, Chenglong; Li, Rui] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Chen, Yanzhao] Qilu Univ Technol, Sch Mech & Automot Engn, Shandong Acad Sci, Jinan, Shandong, Peoples R China.; [Zhu, Bo] Shandong Univ, Sch Mat Sci & Engn, Jinan 250000, Shandong, Peoples R China.

来源:SHOCK AND VIBRATION,2019,Vol.2019

资源类型:期刊论文

WOS:000459099400001

8. Free vibration analysis of bilayered circular micro-plate including surface effects EI SCOPUS SCIE

作者:Zhou, Shasha; Zhang, Rongmin; Zhou, Shenjie; Li, Anqing

作者机构:[Zhou, Shasha; Zhang, Rongmin; Li, Anqing] Qilu Univ Technol, Shandong Acad Sci, Sch Mech & Automot Engn, Daxue Rd 3501, Jinan 250353, Shandong, Peoples R China.; [Zhou, Shenjie] Shandong Univ, Sch Mech Engn, Jingshi Rd 17923, Jinan 250061, Shandong, Peoples R China.

来源:APPLIED MATHEMATICAL MODELLING,2019,Vol.70,54-66

资源类型:期刊论文

WOS:000468714000004

9. Nucleation location and propagation direction of radial and median cracks for brittle material in scratching EI SCOPUS SCIE

作者:Li, Xinying; Gao, Yufei; Ge, Peiqi; Zhang, Lei; Bi, Wenbo; Meng, Jianfeng

作者机构:[Li, Xinying; Gao, Yufei; Ge, Peiqi; Zhang, Lei; Bi, Wenbo; Meng, Jianfeng] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Gao, Yufei; Ge, Peiqi; Zhang, Lei] Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Beijing, Peoples R China.

来源:CERAMICS INTERNATIONAL,2019,Vol.45,Issue.6,7524-7536

资源类型:期刊论文

WOS:000460492200118

10. 基于AMESim拖拉机负载敏感液压提升系统研究

作者:张振华;李瑞川;杨俊茹;徐继康;刘延俊

作者机构:[张振华;李瑞川;杨俊茹;徐继康;刘延俊]山东科技大学机械电子工程学院.;[张振华;李瑞川;杨俊茹;徐继康;刘延俊]山东五征集团有限公司.;[张振华;李瑞川;杨俊茹;徐继康;刘延俊]日照海卓液压有限公司.;[张振华;李瑞川;杨俊茹;徐继康;刘延俊]山东大学机械工程学院

来源:农机化研究,2019,Issue.02,242-247

资源类型:期刊论文

11. Simulation and optimization of overlapped iteration process with multi-coupled activities based on value analysis EI SCOPUS SCIE

作者:Yin, Fupeng; Gao, Qi; Ji, Xue

作者机构:[Yin, Fupeng; Gao, Qi; Ji, Xue] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Yin, Fupeng; Ji, Xue] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.

来源:CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS,2019,Vol.27,Issue.1,57-67

资源类型:期刊论文

WOS:000461561100005

12. Feasibility study of the Ti(C7N3)-based cermet micro-mill based on dynamic fatigue behavior and modeling of the contact stress distribution on the round cutting edge EI

作者:Wang, Yishun ;Zou, Bin ;Huang, Chuanzhen ;Qi, Huan ;Song, Jinpeng

作者机构:[Wang, Yishun ;Zou, Bin ;Huang, Chuanzhen ] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, 17923 Jing Shi Road, Jinan; 250061, China;[Wang, Yishun ;Zou, Bin ;Huang, Chuanzhen ] National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, China;[Wang, Yishun ;Zou, Bin ;Huang, Chuanzhen ] Key Laboratory of High-Efficiency and Clean Mechanical Manufacture at Shandong University, Ministry of Education, China;[Song, Jinpeng ] School of Mechanical Engineering, Taiyuan University of Technology, Taiyuan; 030024, China;[Qi, Huan ] Key Laboratory of Special Purpose Equipment and Advanced Processing Technology, Ministry of Education and Zhejiang Province, Zhejiang University of Technology, Hangzhou; 310014, China

来源:International Journal of Mechanical Sciences,2019,Vol.155,143-158

资源类型:期刊论文

13. Fabrication of a low adhesive superhydrophobic surface on Ti6Al4V alloys using TiO2/Ni composite electrodeposition EI

作者:Meng, Jianbing ;Dong, Xiaojuan ;Zhao, Yugang ;Xu, Rufeng ;Bai, Xue ;Zhou, Haian

作者机构:[Meng, Jianbing ;Dong, Xiaojuan ;Zhao, Yugang ;Xu, Rufeng ;Bai, Xue ;Zhou, Haian ] School of Mechanical Engineering, Shandong University of Technology, Zibo, Shandong; 255000, China

来源:Micromachines,2019,Vol.10,Issue.2

资源类型:期刊论文

14. A high order scheme for unsteady heat conduction equations EI SCOPUS SCIE

作者:Xu, Mingtian

作者机构:[Xu, Mingtian] Shandong Univ, Sch Civil Engn, Dept Engn Mech, Jinan 250061, Shandong, Peoples R China.

来源:APPLIED MATHEMATICS AND COMPUTATION,2019,Vol.348,565-574

资源类型:期刊论文

WOS:000456796600039

15. Exploring the effects of crystal facet in Bi2WO6/BiOCl heterostructures on photocatalytic properties: A first-principles theoretical study EI

作者:Sun, Honggang ;Tian, Zhixue ;Zhou, Guoli ;Zhang, Junmeng ;Li, Pan

作者机构:[Sun, Honggang ] School of Mechanical, Electrical & Information Engineering, Shandong University, Weihai; 264209, China;[Tian, Zhixue ;Zhou, Guoli ;Zhang, Junmeng ;Li, Pan ] College of Physics and Information Engineering, Hebei Advanced Thin Films Laboratory, Hebei Normal University, Shijiazhuang; 050024, China

来源:Applied Surface Science,2019,Vol.469,125-134

资源类型:期刊论文

16. Material Ductile Failure-Based Finite Element Simulations of Chip Serration in Orthogonal Cutting of Titanium Alloy Ti-6Al-4V EI SCOPUS SCIE

作者:Liu, Guoliang; Shah, Suril; Ozel, Tugrul

作者机构:[Liu, Guoliang; Shah, Suril; Ozel, Tugrul] Rutgers State Univ, Mfg & Automat Res Lab, Dept Ind & Syst Engn, Piscataway, NJ 08854 USA.; [Liu, Guoliang] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2019,Vol.141,Issue.4

资源类型:期刊论文

WOS:000460839400018

17. 悬浮上砂金刚石线锯的锯切性能试验分析

作者:郑楚夕;马晓宾;谢乾;毕文波;葛培琪;龚洋;柳廷全

作者机构:[郑楚夕;马晓宾;谢乾;毕文波;葛培琪;龚洋;柳廷全]山东大学机械工程学院.;[郑楚夕;马晓宾;谢乾;毕文波;葛培琪;龚洋;柳廷全]山东大学高效洁净机械制造教育部重点实验室.;[郑楚夕;马晓宾;谢乾;毕文波;葛培琪;龚洋;柳廷全]山田研磨材料有限公司

来源:金刚石与磨料磨具工程,2019,Issue.01,76-79

资源类型:期刊论文

18. Visualization analysis of the working process and dynamic characteristics comparison of a hydraulically damped rubber mount with resonant column channel EI SCOPUS SCIE

作者:He, Xin; Wang, Yanan; Lian, Chen; Li, Qingfeng

作者机构:[He, Xin; Wang, Yanan; Lian, Chen; Li, Qingfeng] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [He, Xin; Wang, Yanan; Lian, Chen; Li, Qingfeng] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [He, Xin; Wang, Yanan; Lian, Chen; Li, Qingfeng] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.

来源:JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING,2019,Vol.41,Issue.2

资源类型:期刊论文

WOS:000457211000001

19. The size-dependent static bending of a partially covered laminated microbeam EI SCOPUS SCIE

作者:Fu, Guangyang; Zhou, Shenjie; Qi, Lu

作者机构:[Fu, Guangyang; Zhou, Shenjie; Qi, Lu] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Fu, Guangyang; Zhou, Shenjie; Qi, Lu] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2019,Vol.152,411-419

资源类型:期刊论文

WOS:000459837400030

20. Optimum selection of tool materials for machining of high-strength steels based on fuzzy comprehensive evaluation method EI SCOPUS SCIE

作者:Xu, Qingzhong; Zhao, Jun; Ai, Xing; Huang, Weimin; Wang, Guijie

作者机构:[Xu, Qingzhong; Zhao, Jun; Ai, Xing; Huang, Weimin; Wang, Guijie] Shandong Univ, Sch Mech Engn, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2019,Vol.233,Issue.1,145-153

资源类型:期刊论文

WOS:000454115700013

共 318 页, 6,353 条记录

TOP