按条件检索“567”条记录

已选条件: 数据来源: EI × 数据来源: WOS × 数据来源: 万方 × 出版年: 2013 × 机构: 机械工程学院 × 机构: 土建与水利学院 × 机构: 岩土与结构工程... × 文献类型: 期刊论文 × 文献类型: proceedingspaper ×
导出
  • 排序
  • 显示
1. 随机性存储模型在水量调度中的应用研究

作者:韩春;王振;高祀敏;王延梅;

作者机构:[韩春;王振;高祀敏;王延梅]山东大学土建与水利学院;[韩春;王振;高祀敏;王延梅]青岛胶州水利勘测设计院

来源:水资源与水工程学报,Journal of Water Resources and Water Engineering,2013,Issue.05,128-130

资源类型:期刊论文

2. 地下水对节理岩体隧洞围岩稳定性的影响

作者:王振;贾超;韩春;

作者机构:[王振;贾超;韩春]山东大学土建与水利学院

来源:人民黄河,Yellow River,2013,Issue.06,119-120+123

资源类型:期刊论文

3. Bidirectional construction process mechanics for tunnels in dipping layered formation EI SCOPUS SCIE

作者:Li, Shu-cai; Hu, Cong; Li, Li-ping; Song, Shu-guang; Zhou, Yi; Shi, Shao-shuai

作者机构:[Li, Shu-cai; Hu, Cong; Li, Li-ping; Song, Shu-guang; Zhou, Yi; Shi, Shao-shuai] Shandong Univ, Geotech & Struct Engn Res Ctr, Jinan 250061, Shandong, Peoples R China.

来源:TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY,2013,Vol.36,57-65

WOS被引数:7

资源类型:期刊论文

WOS:000317872100007

4. 不同断面形式节理岩体隧洞位移响应模拟

作者:王振;韩春;李亚非;边易达;

作者机构:[王振;韩春;李亚非;边易达]山东大学土建与水利学院;[王振;韩春;李亚非;边易达]南水北调东线山东干线有限责任公司

来源:人民黄河,Yellow River,2013,Issue.09,139-140

资源类型:期刊论文

5. 论纳米碳酸钙和粉煤灰掺量对混凝土凝结时间的影响

作者:赵志钦;魏姗姗;黄大伟;

作者机构:[赵志钦;魏姗姗;黄大伟]山东大学土建与水利学院交通系

来源:建材发展导向,Development Guide to Building Materials,2013,Issue.04,66-68

资源类型:期刊论文

6. Numerical investigation on weld residual stresses in tube to tube sheet joint of a heat exchanger EI SCOPUS SCIE

作者:Xu, Shugen; Wang, Weiqiang

作者机构:[Xu, Shugen] China Univ Petr Huadong, Coll Chem Engn, Qingdao 266555, Peoples R China.; [Xu, Shugen] China Univ Petr Huadong, State Key Lab Heavy Oil Proc, Qingdao 266555, Peoples R China.; [Wang, Weiqiang] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING,2013,Vol.101,37-44

WOS被引数:25

资源类型:期刊论文

WOS:000314388000005

7. Optimization of Bubble Amount in Resin Mineral Composite based Vacuum pouring procedure CPCI-S EI SCOPUS

作者:Wang, Tao; Zhang, JianHua; Zhang, Yi; Ren, XiuHua

作者机构:[Wang, Tao; Zhang, JianHua; Zhang, Yi; Ren, XiuHua] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ China, Jinan 250061, Peoples R China.

会议名称:3rd International Conference on Advanced Design and Manufacturing Engineering (ADME 2013)

会议日期:JUL 13-14, 2013

来源:ADVANCED MATERIALS AND PROCESSES III, PTS 1 AND 2,2013,Vol.395-396,60-63

WOS被引数:4

资源类型:会议论文;期刊论文

WOS:000338973200014

8. 基于ANSYS分析的减速器输出轴设计

作者:雒晓兵;许可芳;王均刚;

作者机构:[雒晓兵;许可芳;王均刚]兰州交通大学博文学院;[雒晓兵;许可芳;王均刚]山东大学机械工程学院

来源:机械研究与应用,Mechanical Research & Application,2013,Issue.06,34-36

资源类型:期刊论文

9. Assessment of cerebral oxygenation oscillations in subjects with hypertension SCOPUS SCIE

作者:Li, Zengyong; Zhang, Ming; Xin, Qing; Luo, Site; Zhou, Weiei; Cui, Ruofei; Lu, Liqian

作者机构:[Li, Zengyong; Luo, Site; Zhou, Weiei; Cui, Ruofei; Lu, Liqian] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Zhang, Ming] Hong Kong Polytech Univ, Fac Engn, Interdisciplinary Div Biomed Engn, Kowloon, Hong Kong, Peoples R China.; [Xin, Qing] Hosp Shandong Univ, Jinan 250061, Peoples R China.; [Li, Zengyong] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Peoples R China.

来源:MICROVASCULAR RESEARCH,2013,Vol.88,32-41

WOS被引数:8

资源类型:期刊论文

WOS:000326007600005

10. Research on material removal rate of powder mixed near dry electrical discharge machining EI SCOPUS SCIE

作者:Bai, Xue; Zhang, Qin-He; Yang, Ting-Yi; Zhang, Jian-Hua

作者机构:[Bai, Xue; Zhang, Qin-He; Yang, Ting-Yi; Zhang, Jian-Hua] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Bai, Xue; Zhang, Qin-He; Yang, Ting-Yi; Zhang, Jian-Hua] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2013,Vol.68,Issue.5-8,1757-1766

WOS被引数:16

资源类型:期刊论文

WOS:000324276600068

11. Analytical and experimental study on formation of concentrated shear band of saw tooth chip in high-speed machining EI SCOPUS SCIE

作者:Su, Guosheng; Liu, Zhanqiang

作者机构:[Su, Guosheng] Shandong Polytech Univ, Sch Mech & Automot Engn, Jinan 250353, Shandong, Peoples R China.; [Liu, Zhanqiang] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2013,Vol.65,Issue.9-12,1735-1740

WOS被引数:7

资源类型:期刊论文

WOS:000316364000043

12. An improved fluid convection solution in conventional grinding EI SCOPUS SCIE

作者:Lei Zhang;W. Brian Rowe;Michael N. Morgan

作者机构:[Zhang, L] Key Laboratory of High-efficiency and Clean Mechanical Manufacture at Shandong University, Ministry of Education, Shandong University, Jingshi Road 17923#, Jinan, 250061, China;[ Rowe, W.B] Advanced Manufacturing Technology Research Laboratory, General Engineering Research Institute, Liverpool John Moores University, Liverpool, United Kingdom;[ Morgan, M.N] Advanced Manufacturing Technology Research Laboratory, General Engineering Research Institute, Liverpool John Moores University, Liverpool, United Kingdom

来源:Proceedings of the Institution of Mechanical Engineers, Part B. Journal of engineering manufacture,PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2013,Vol.227,Issue.6,832-838

WOS被引数:6

资源类型:期刊论文

WOS:000329576700006

13. Study on Frequency Tuning of Parallel Mechanism for Reducing Vibration CPCI-S EI SCOPUS

作者:Yang, Feng; Niu, Junchuan; Li, Kunpeng; Li, Yong

作者机构:[Yang, Feng; Niu, Junchuan; Li, Kunpeng; Li, Yong] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

会议名称:International Conference on Applied Mechanics and Materials (ICAMM 2012)

会议日期:NOV 24-25, 2012

来源:APPLIED MECHANICS AND MATERIALS I, PTS 1-3,2013,Vol.275-277,905-908

资源类型:会议论文;期刊论文

WOS:000320899900166

14. 微型流化床反应器液相冷态进样停留时间分布模拟与实验

作者:张彤辉;董玉平;郭飞强;吕兆川;范鹏飞;景元琢;

作者机构:[张彤辉;董玉平;郭飞强;吕兆川;范鹏飞;景元琢]山东大学机械工程学院;[张彤辉;董玉平;郭飞强;吕兆川;范鹏飞;景元琢]山东百川同创能源有限公司

来源:化工机械,Chemical Engineering & Machinery,2013,Issue.06,796-800

资源类型:期刊论文

15. Computational fluid dynamics analyzing to optimize tangential-inlet swirl nozzle for preparing nano-drug during a SEDS process EI SCOPUS

作者:Xiao, Kefeng ;Hao, Zhihui

作者机构:[Xiao, Kefeng ;Hao, Zhihui ] Laboratory of Bio-pharmacy of Agricultural, College of Chemistry and Pharmacy, Qingdao Agricultural University, Qingdao, China;[Xiao, Kefeng ] School of Mechanical Engineering, Shandong University, Jinan, China

来源:Journal of Chemical and Pharmaceutical Research,2013,Vol.5,Issue.6,43-49

资源类型:期刊论文

16. 极坐标系下弹性问题的重心插值配点法 EI SCOPUS

作者:李树忱;王兆清;袁超;

作者机构:[李树忱;王兆清;袁超]山东大学岩土与结构工程研究中心;[李树忱;王兆清;袁超]山东建筑大学工程力学研究所

来源:中南大学学报(自然科学版),Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology),2013,Vol.44,Issue.5,2031-2040

资源类型:期刊论文

17. The effects of cutting parameters on tool life and wear mechanisms of CBN tool in high-speed face milling of hardened steel EI SCOPUS SCIE

作者:Cui, Xiaobin; Zhao, Jun; Dong, Yongwang

作者机构:[Cui, Xiaobin; Zhao, Jun; Dong, Yongwang] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg MOE, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2013,Vol.66,Issue.5-8,955-964

WOS被引数:9

资源类型:期刊论文

WOS:000317970300029

18. A Gabor Filter Based Image Acquisition Method for Raised Characters CPCI-S EI SCOPUS

作者:Li, Xueyong; Lu, Changhou

作者机构:[Li, Xueyong] Shandong Univ, Sch Mech Engn, Jinan, Peoples R China.; Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Peoples R China.

会议名称:International Conference on Mechatronics, Robotics and Automation (ICMRA 2013)

会议日期:JUN 13-14, 2013

来源:MECHATRONICS, ROBOTICS AND AUTOMATION, PTS 1-3,2013,Vol.373-375,459-463

WOS被引数:1

资源类型:会议论文;期刊论文

WOS:000339362300085

19. 考虑磁头表面高度不连续性气膜润滑的数值模拟与有效算法 SCOPUS

作者:杨廷毅;史宝军;葛培琪;白雪;

作者机构:[杨廷毅;史宝军;葛培琪;白雪]山东大学机械工程学院高效洁净机械制造教育部重点实验室;[杨廷毅;史宝军;葛培琪;白雪]山东建筑大学机电工程学院

来源:计算力学学报,Jisuan Lixue Xuebao/Chinese Journal of Computational Mechanics,2013,Vol.30,Issue.3,376-380+405

资源类型:期刊论文

20. Forming process and mechanical properties of fibers-reinforced polymer concrete EI SCOPUS SCIE

作者:Tao Wang;Jianhua Zhang;Wenfeng Bai

作者机构:[Wang, T] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan, 250061, China;[ Zhang, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan, 250061, China;[ Bai, W] Department of Electronic Science and Engineering, Huanghuai University, Henan Provence, China;[ Hao, S] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan, 250061, China

来源:Journal of Reinforced Plastics and Composites,JOURNAL OF REINFORCED PLASTICS AND COMPOSITES,2013,Vol.32,Issue.12,907-911

WOS被引数:6

资源类型:期刊论文

WOS:000319814800005

共 29 页, 567 条记录

TOP