按条件检索“489”条记录

已选条件: 数据来源: EI × 数据来源: WOS × 数据来源: 万方 × 数据来源: 维普 × 出版年: 2013 × 机构: 机械工程学院 × 机构: 土建与水利学院 × 文献类型: 期刊论文 × 文献类型: proceedingspaper ×
导出
  • 排序
  • 显示
1. 随机性存储模型在水量调度中的应用研究

作者:韩春;王振;高祀敏;王延梅;

作者机构:[韩春;王振;高祀敏;王延梅]山东大学土建与水利学院;[韩春;王振;高祀敏;王延梅]青岛胶州水利勘测设计院

来源:水资源与水工程学报,Journal of Water Resources and Water Engineering,2013,Issue.05,128-130

资源类型:期刊论文

2. 地下水对节理岩体隧洞围岩稳定性的影响

作者:王振;贾超;韩春;

作者机构:[王振;贾超;韩春]山东大学土建与水利学院

来源:人民黄河,Yellow River,2013,Issue.06,119-120+123

资源类型:期刊论文

3. 不同断面形式节理岩体隧洞位移响应模拟

作者:王振;韩春;李亚非;边易达;

作者机构:[王振;韩春;李亚非;边易达]山东大学土建与水利学院;[王振;韩春;李亚非;边易达]南水北调东线山东干线有限责任公司

来源:人民黄河,Yellow River,2013,Issue.09,139-140

资源类型:期刊论文

4. 论纳米碳酸钙和粉煤灰掺量对混凝土凝结时间的影响

作者:赵志钦;魏姗姗;黄大伟;

作者机构:[赵志钦;魏姗姗;黄大伟]山东大学土建与水利学院交通系

来源:建材发展导向,Development Guide to Building Materials,2013,Issue.04,66-68

资源类型:期刊论文

5. Numerical investigation on weld residual stresses in tube to tube sheet joint of a heat exchanger EI SCOPUS SCIE

作者:Xu, Shugen; Wang, Weiqiang

作者机构:[Xu, Shugen] China Univ Petr Huadong, Coll Chem Engn, Qingdao 266555, Peoples R China.; [Xu, Shugen] China Univ Petr Huadong, State Key Lab Heavy Oil Proc, Qingdao 266555, Peoples R China.; [Wang, Weiqiang] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING,2013,Vol.101,37-44

WOS被引数:25

资源类型:期刊论文

WOS:000314388000005

6. 石材行业清洁生产技术概论(三)——面向石材加工过程清洁生产评价体系的研究

作者:白硕玮;王志;张进生;刘召龙;黄波;

作者机构:[白硕玮;王志;张进生;刘召龙;黄波]山东大学机械工程学院

来源:石材,2013,Issue.10,35-39

资源类型:期刊论文

7. Optimization of Bubble Amount in Resin Mineral Composite based Vacuum pouring procedure CPCI-S EI SCOPUS

作者:Wang, Tao; Zhang, JianHua; Zhang, Yi; Ren, XiuHua

作者机构:[Wang, Tao; Zhang, JianHua; Zhang, Yi; Ren, XiuHua] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ China, Jinan 250061, Peoples R China.

会议名称:3rd International Conference on Advanced Design and Manufacturing Engineering (ADME 2013)

会议日期:JUL 13-14, 2013

来源:ADVANCED MATERIALS AND PROCESSES III, PTS 1 AND 2,2013,Vol.395-396,60-63

WOS被引数:4

资源类型:会议论文;期刊论文

WOS:000338973200014

8. 基于ANSYS分析的减速器输出轴设计

作者:雒晓兵;许可芳;王均刚;

作者机构:[雒晓兵;许可芳;王均刚]兰州交通大学博文学院;[雒晓兵;许可芳;王均刚]山东大学机械工程学院

来源:机械研究与应用,Mechanical Research & Application,2013,Issue.06,34-36

资源类型:期刊论文

9. Assessment of cerebral oxygenation oscillations in subjects with hypertension SCOPUS SCIE

作者:Li, Zengyong; Zhang, Ming; Xin, Qing; Luo, Site; Zhou, Weiei; Cui, Ruofei; Lu, Liqian

作者机构:[Li, Zengyong; Luo, Site; Zhou, Weiei; Cui, Ruofei; Lu, Liqian] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Zhang, Ming] Hong Kong Polytech Univ, Fac Engn, Interdisciplinary Div Biomed Engn, Kowloon, Hong Kong, Peoples R China.; [Xin, Qing] Hosp Shandong Univ, Jinan 250061, Peoples R China.; [Li, Zengyong] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Peoples R China.

来源:MICROVASCULAR RESEARCH,2013,Vol.88,32-41

WOS被引数:8

资源类型:期刊论文

WOS:000326007600005

10. Research on material removal rate of powder mixed near dry electrical discharge machining EI SCOPUS SCIE

作者:Bai, Xue; Zhang, Qin-He; Yang, Ting-Yi; Zhang, Jian-Hua

作者机构:[Bai, Xue; Zhang, Qin-He; Yang, Ting-Yi; Zhang, Jian-Hua] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Bai, Xue; Zhang, Qin-He; Yang, Ting-Yi; Zhang, Jian-Hua] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2013,Vol.68,Issue.5-8,1757-1766

WOS被引数:16

资源类型:期刊论文

WOS:000324276600068

11. Analytical and experimental study on formation of concentrated shear band of saw tooth chip in high-speed machining EI SCOPUS SCIE

作者:Su, Guosheng; Liu, Zhanqiang

作者机构:[Su, Guosheng] Shandong Polytech Univ, Sch Mech & Automot Engn, Jinan 250353, Shandong, Peoples R China.; [Liu, Zhanqiang] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2013,Vol.65,Issue.9-12,1735-1740

WOS被引数:7

资源类型:期刊论文

WOS:000316364000043

12. An improved fluid convection solution in conventional grinding EI SCOPUS SCIE

作者:Lei Zhang;W. Brian Rowe;Michael N. Morgan

作者机构:[Zhang, L] Key Laboratory of High-efficiency and Clean Mechanical Manufacture at Shandong University, Ministry of Education, Shandong University, Jingshi Road 17923#, Jinan, 250061, China;[ Rowe, W.B] Advanced Manufacturing Technology Research Laboratory, General Engineering Research Institute, Liverpool John Moores University, Liverpool, United Kingdom;[ Morgan, M.N] Advanced Manufacturing Technology Research Laboratory, General Engineering Research Institute, Liverpool John Moores University, Liverpool, United Kingdom

来源:Proceedings of the Institution of Mechanical Engineers, Part B. Journal of engineering manufacture,PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2013,Vol.227,Issue.6,832-838

WOS被引数:6

资源类型:期刊论文

WOS:000329576700006

13. Study on Frequency Tuning of Parallel Mechanism for Reducing Vibration CPCI-S EI SCOPUS

作者:Yang, Feng; Niu, Junchuan; Li, Kunpeng; Li, Yong

作者机构:[Yang, Feng; Niu, Junchuan; Li, Kunpeng; Li, Yong] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

会议名称:International Conference on Applied Mechanics and Materials (ICAMM 2012)

会议日期:NOV 24-25, 2012

来源:APPLIED MECHANICS AND MATERIALS I, PTS 1-3,2013,Vol.275-277,905-908

资源类型:会议论文;期刊论文

WOS:000320899900166

14. 微型流化床反应器液相冷态进样停留时间分布模拟与实验

作者:张彤辉;董玉平;郭飞强;吕兆川;范鹏飞;景元琢;

作者机构:[张彤辉;董玉平;郭飞强;吕兆川;范鹏飞;景元琢]山东大学机械工程学院;[张彤辉;董玉平;郭飞强;吕兆川;范鹏飞;景元琢]山东百川同创能源有限公司

来源:化工机械,Chemical Engineering & Machinery,2013,Issue.06,796-800

资源类型:期刊论文

15. Computational fluid dynamics analyzing to optimize tangential-inlet swirl nozzle for preparing nano-drug during a SEDS process EI SCOPUS

作者:Xiao, Kefeng ;Hao, Zhihui

作者机构:[Xiao, Kefeng ;Hao, Zhihui ] Laboratory of Bio-pharmacy of Agricultural, College of Chemistry and Pharmacy, Qingdao Agricultural University, Qingdao, China;[Xiao, Kefeng ] School of Mechanical Engineering, Shandong University, Jinan, China

来源:Journal of Chemical and Pharmaceutical Research,2013,Vol.5,Issue.6,43-49

资源类型:期刊论文

16. The effects of cutting parameters on tool life and wear mechanisms of CBN tool in high-speed face milling of hardened steel EI SCOPUS SCIE

作者:Cui, Xiaobin; Zhao, Jun; Dong, Yongwang

作者机构:[Cui, Xiaobin; Zhao, Jun; Dong, Yongwang] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg MOE, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2013,Vol.66,Issue.5-8,955-964

WOS被引数:9

资源类型:期刊论文

WOS:000317970300029

17. A Gabor Filter Based Image Acquisition Method for Raised Characters CPCI-S EI SCOPUS

作者:Li, Xueyong; Lu, Changhou

作者机构:[Li, Xueyong] Shandong Univ, Sch Mech Engn, Jinan, Peoples R China.; Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Peoples R China.

会议名称:International Conference on Mechatronics, Robotics and Automation (ICMRA 2013)

会议日期:JUN 13-14, 2013

来源:MECHATRONICS, ROBOTICS AND AUTOMATION, PTS 1-3,2013,Vol.373-375,459-463

WOS被引数:1

资源类型:会议论文;期刊论文

WOS:000339362300085

18. Mining unusual and rare stellar spectra from large spectroscopic survey data sets using the outlier-detection method SCOPUS SCIE

作者:Wei, P.;Luo, A.;Li, Y.;Pan, J.;Tu, L.;Jiang, B.;Kong, X.;Shi, Z.;Yi, Z.;Wang, F.;Liu, J.;Zhao, Y.

作者机构:[Wei, P] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China, University of Chinese Academy of Sciences, Beijing 100049, China;[ Luo, A] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China, School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China;[ Li, Y] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China;[ Pan, J] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China;[ Tu, L] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China, School of Science, Liaoning University of Science and Technology, Anshan 144051, China;[ Jiang, B] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China, University of Chinese Academy of Sciences, Beijing 100049, China, School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China;[ Kong, X] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China;[ Shi, Z] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China, University of Chinese Academy of Sciences, Beijing 100049, China, Institute of Automation, Chinese Academy of Sciences, Beijing 100190, China;[ Yi, Z] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China, University of Chinese Academy of Sciences, Beijing 100049, China, School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China;[ Wang, F] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China, University of Chinese Academy of Sciences, Beijing 100049, China;[ Liu, J] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China;[ Zhao, Y] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China

来源:Monthly notices of the Royal Astronomical Society,MONTHLY NOTICES OF THE ROYAL ASTRONOMICAL SOCIETY,2013,Vol.431,Issue.2,1800-1811

WOS被引数:15

资源类型:期刊论文

WOS:000318345200062

19. 考虑磁头表面高度不连续性气膜润滑的数值模拟与有效算法 SCOPUS

作者:杨廷毅;史宝军;葛培琪;白雪;

作者机构:[杨廷毅;史宝军;葛培琪;白雪]山东大学机械工程学院高效洁净机械制造教育部重点实验室;[杨廷毅;史宝军;葛培琪;白雪]山东建筑大学机电工程学院

来源:计算力学学报,Jisuan Lixue Xuebao/Chinese Journal of Computational Mechanics,2013,Vol.30,Issue.3,376-380+405

资源类型:期刊论文

20. Forming process and mechanical properties of fibers-reinforced polymer concrete EI SCOPUS SCIE

作者:Tao Wang;Jianhua Zhang;Wenfeng Bai

作者机构:[Wang, T] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan, 250061, China;[ Zhang, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan, 250061, China;[ Bai, W] Department of Electronic Science and Engineering, Huanghuai University, Henan Provence, China;[ Hao, S] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan, 250061, China

来源:Journal of Reinforced Plastics and Composites,JOURNAL OF REINFORCED PLASTICS AND COMPOSITES,2013,Vol.32,Issue.12,907-911

WOS被引数:6

资源类型:期刊论文

WOS:000319814800005

共 25 页, 489 条记录

TOP