按条件检索“284”条记录

已选条件: 出版年: 2015 × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
1. Optimization of machining parameters for micro-machining nozzle based on characteristics of surface roughness EI SCOPUS SCIE

作者:Cai, Yukui; Liu, Zhanqiang; Shi, Zhenyu; Song, Qinghua; Wan, Yi

作者机构:[Cai, Yukui; Liu, Zhanqiang; Shi, Zhenyu; Song, Qinghua; Wan, Yi] Shandong Univ, Key Lab High Efficiency & Clean Mech Mfg, Minist Educ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,Vol.80,Issue.5-8,1403-1410

WOS被引数:6

资源类型:期刊论文

WOS:000360700900055

2. Frequency-specific functional connectivity revealed by wavelet-based coherence analysis in elderly subjects with cerebral infarction using NIRS method SCOPUS SCIE

作者:Tan, Qitao; Zhang, Ming; Wang, Yi; Zhang, Manyu; Wang, Yan; Xin, Qing; Wang, Bitan; Li, Zengyong

作者机构:[Tan, Qitao; Zhang, Manyu; Wang, Bitan; Li, Zengyong] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Peoples R China.; [Zhang, Ming; Wang, Yan] Hong Kong Polytech Univ, Fac Engn, Interdisciplinary Div Biomed Engn, Kowloon, Hong Kong, Peoples R China.; [Wang, Yi] Jinan Cent Hosp, Jinan 250013, Peoples R China.; [Xin, Qing] Hosp Shandong Univ, Jinan 250061, Peoples R China.

来源:MEDICAL PHYSICS,2015,Vol.42,Issue.9,5391-5403

WOS被引数:6

资源类型:期刊论文

WOS:000360645000039

3. Study on chip morphology and milling characteristics of laser cladding layer EI SCOPUS SCIE

作者:Zhao, Yanhua; Sun, Jie; Li, Jianfeng

作者机构:[Zhao, Yanhua; Sun, Jie; Li, Jianfeng] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Zhao, Yanhua; Sun, Jie; Li, Jianfeng] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,Vol.77,Issue.5-8,783-796

WOS被引数:8

资源类型:期刊论文

WOS:000350120000002

4. Tribological behaviors of two micro textured surfaces generated by vibrating milling under boundary lubricated sliding EI SCOPUS SCIE

作者:Shen, Xue-Hui; Tao, Guo-Can

作者机构:[Shen, Xue-Hui] Qilu Univ Technol, Dept Mech & Automot Engn, Jinan 250353, Peoples R China.; [Tao, Guo-Can] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,Vol.79,Issue.9-12,1995-2002

WOS被引数:8

资源类型:期刊论文

WOS:000358548700050

5. Study on crack sensitivity and tribological characterisation of functionally gradient material multi-layer by laser cladding with powder mixture of Ni-based alloy and tungsten carbide EI SCOPUS SCIE

作者:Zhao, Yanhua; Sun, Jie; Li, Jianfeng

作者机构:[Sun, Jie] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING,2015,Vol.9,Issue.4,370-383

资源类型:期刊论文

WOS:000364814800007

6. 金刚石框架锯锯切花岗岩的锯切力实验研究 SCOPUS

作者:许东;张进生;王志;张恒;孙芹;

作者机构:[许东;张进生;王志;张恒;孙芹]山东大学机械工程学院;[许东;张进生;王志;张恒;孙芹]山东大学高效洁净机械制造教育部重点实验室;[许东;张进生;王志;张恒;孙芹]山东省石材工程技术研究中心

来源:金刚石与磨料磨具工程,Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering,2015,Vol.35,Issue.2,21-25+32

资源类型:期刊论文

7. Microstructure of the (100) and (111) facets of Boron-doped diamonds under HPHT EI SCOPUS

作者:Gong, J.H. ;Chen, Q.L. ;Liu, S.N. ;Yang, L.M. ;Gao, J. ;Li, W. ;Bin, X.

作者机构:[Gong, J.H. ;Chen, Q.L. ;Liu, S.N. ;Yang, L.M. ;Gao, J. ;Li, W. ] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai; 264209, China;[Bin, X. ] School of Materials Science and Engineering, Shandong Jianzhu University, Jinan; 250101, China

来源:Materials Research Innovations,2015,Vol.19,S932-S936

资源类型:期刊论文

8. Evaluation of the performance of a passive-active vibration isolation system EI SCOPUS SCIE

作者:Sun, L. L.; Hansen, C. H.; Doolan, C.

作者机构:[Sun, L. L.] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Hansen, C. H.; Doolan, C.] Univ Adelaide, Sch Mech Engn, Adelaide, SA 5005, Australia.

来源:MECHANICAL SYSTEMS AND SIGNAL PROCESSING,2015,Vol.50-51,480-497

WOS被引数:7

资源类型:期刊论文

WOS:000343687200032

9. Effect of Gravity on the Hydrodynamics in an Unbaffled Stirred Vessel EI SCOPUS SCIE

作者:Yang, Feng L.; Zhou, Shen J.

作者机构:[Yang, Feng L.; Zhou, Shen J.] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Yang, Feng L.; Zhou, Shen J.] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan 250061, Peoples R China.

来源:CHEMICAL ENGINEERING & TECHNOLOGY,2015,Vol.38,Issue.5,819-826

WOS被引数:2

资源类型:期刊论文

WOS:000353515100008

10. 基于ANSYS圆锯片模态分析及谐响应分析 SCOPUS

作者:叶鲁浩;王志;张进生;黄波;鞠军伟;高丽君;高克祥;于家伟;

作者机构:[叶鲁浩;王志;张进生;黄波;鞠军伟;高丽君;高克祥;于家伟]山东大学机械工程学院;[叶鲁浩;王志;张进生;黄波;鞠军伟;高丽君;高克祥;于家伟]山东省石材工程技术研究中心;[叶鲁浩;王志;张进生;黄波;鞠军伟;高丽君;高克祥;于家伟]高效洁净机械制造教育部重点实验室(山东大学);[叶鲁浩;王志;张进生;黄波;鞠军伟;高丽君;高克祥;于家伟]日照海恩锯业有限公司

来源:金刚石与磨料磨具工程,Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering,2015,Vol.35,Issue.4,41-46

资源类型:期刊论文

11. 圆锯片–花岗石切割系统仿真研究 SCOPUS

作者:叶鲁浩;张进生;王志;黄波;鞠军伟;葛健煜;高丽君;

作者机构:[叶鲁浩;张进生;王志;黄波;鞠军伟;葛健煜;高丽君]山东大学机械工程学院;[叶鲁浩;张进生;王志;黄波;鞠军伟;葛健煜;高丽君]山东省石材工程技术研究中心;[叶鲁浩;张进生;王志;黄波;鞠军伟;葛健煜;高丽君]高效洁净机械制造教育部重点实验室(山东大学);[叶鲁浩;张进生;王志;黄波;鞠军伟;葛健煜;高丽君]山东大学海易研究院

来源:金刚石与磨料磨具工程,Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering,2015,Vol.35,Issue.3,35-39

资源类型:期刊论文

12. 多绳金刚石串珠锯机振动特性分析 SCOPUS

作者:王飞;黄波;张进生;牛军川;张恒;

作者机构:[王飞;黄波;张进生;牛军川;张恒]山东大学机械工程学院;[王飞;黄波;张进生;牛军川;张恒]山东大学高效洁净机械制造教育部重点实验室;[王飞;黄波;张进生;牛军川;张恒]山东省石材工程技术研究中心

来源:金刚石与磨料磨具工程,Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering,2015,Vol.35,Issue.3,1-5+9

资源类型:期刊论文

13. 基于二维条码质量的激光直接标刻工艺参量 EI SCOPUS

作者:李春玲[1,2];路长厚[1];李建美[1]

作者机构:[李春玲;路长厚;李建美]山东大学机械工程学院高效洁净机械制造教育部重点实验室,山东济南250061,中国.;[李春玲]齐鲁工业大学机械与汽车工程学院,山东济南250353,中国

来源:中南大学学报:自然科学版,Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology),2015,Vol.46,Issue.12,4488-4496

资源类型:期刊论文

14. All phase biorthogonal transform based on GPU EI SCOPUS

作者:Shan, Rongyang ;Wang, Chengyou ;Zhou, Xiao ;Wang, Liping

作者机构:[Shan, Rongyang ;Wang, Chengyou ;Zhou, Xiao ;Wang, Liping ] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, China

来源:International Journal of Multimedia and Ubiquitous Engineering,2015,Vol.10,Issue.7,295-304

资源类型:期刊论文

15. EFFECTS OF ACUTE GLOBAL ISCHEMIA ON RE-ENTRANT ARRHYTHMOGENESIS: A SIMULATION STUDY SCOPUS SCIE

作者:Lu, Weigang;Li, Jie;Yang, Fei;Luo, Cunjin;Wang, Kuanquan;Adeniran, Ismail;Zhang, Henggui

作者机构:[Lu, W] Department of Educational Technology, Ocean University of China, Qingdao, China;[ Li, J] School of Electrical Engineering, Yanshan University, Qinhuangdao, China;[ Yang, F] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, China;[ Luo, C] School of Computer Science and Technology, Harbin Institute of Technology, Harbin, China;[ Wang, K] School of Computer Science and Technology, Harbin Institute of Technology, Harbin, China;[ Adeniran, I] School of Physics and Astronomy, University of Manchester, Manchester, United Kingdom;[ Zhang, H] School of Physics and Astronomy, University of Manchester, Manchester, United Kingdom

来源:Journal of biological systems,JOURNAL OF BIOLOGICAL SYSTEMS,2015,Vol.23,Issue.2,213-230

WOS被引数:5

资源类型:期刊论文

WOS:000355379500003

16. Deformation control in micro-milling of thin-walled structures EI SCOPUS SCIE

作者:Kou, Zhaojun; Wan, Yi; Liu, Zhanqiang; Cai, Yukui; Liang, Xichang

作者机构:[Kou, Zhaojun; Wan, Yi; Liu, Zhanqiang; Cai, Yukui; Liang, Xichang] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,Vol.81,Issue.5-8,967-974

WOS被引数:6

资源类型:期刊论文

WOS:000363718600022

17. Role of tri-capped triangular prism (TTP) polyhedra in formation and destabilization of Fe-Y-B glassy alloys EI SCOPUS SCIE

作者:Ma, H. J.; Shen, K. C.; Pan, S. P.; Zhao, J.; Qin, J. Y.; Kim, K. B.; Wang, W. M.

作者机构:[Ma, H. J.; Shen, K. C.; Pan, S. P.; Qin, J. Y.; Wang, W. M.] Shandong Univ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Jinan 250061, Peoples R China.; [Ma, H. J.] Univ New S Wales, Sch Mat Sci & Engn, Sydney, NSW 2052, Australia.; [Ma, H. J.] Weifang Univ, Sch Mech & Elect Engn, Weifang 261061, Peoples R China.; [Zhao, J.] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Kim, K. B.] Sejong Univ, HMC, Seoul 143747, South Korea.

来源:JOURNAL OF NON-CRYSTALLINE SOLIDS,2015,Vol.425,67-73

WOS被引数:3

资源类型:期刊论文

WOS:000359958700009

18. Comparative research on MPPT methods of photovoltaic cells EI SCOPUS

作者:Hai, Liu ;Aqiang, Zhang ;Yong, Song ;Qingfu, Du ;Jitian, Han

作者机构:[Hai, Liu ;Jitian, Han ] School of Energy and Power Engineering, Shandong University, Jinan, China;[Hai, Liu ;Aqiang, Zhang ;Yong, Song ;Qingfu, Du ] School of Mechanical, Electrical and Information Engineering, Shandong University at Weihai, Weihai, China

来源:Metallurgical and Mining Industry,2015,Vol.7,Issue.9,104-112

资源类型:期刊论文

19. Modeling the spatial conformation and allosteric phenomenon of protein alpha helix\'s tertiary structure EI SCOPUS

作者:Yan, Yang ;Zhang, Chengjin ;Gao, Rui ;Wang, Chaoyang

作者机构:[Yan, Yang ;Gao, Rui ] School of Control Science and Engineering, Shandong University, Jinan, Shandong Province, China;[Wang, Chaoyang ] School of Mathematics and Systems Science, Shandong University of Science and Technology, Qingdao, Shandong Province, China;[Zhang, Chengjin ] School of Mechanical, Electrical and Information Engineering, Shandong University at Weihai, Weihai, Shandong Province, China

会议名称:2014 11th World Congress on Intelligent Control and Automation, WCICA 2014

会议日期:29 June 2014 through 4 July 2014

来源:Proceedings of the World Congress on Intelligent Control and Automation (WCICA),2015,Vol.2015-March,Issue.March,5506-5510

资源类型:会议论文;期刊论文

20. Research on thermoplastic starch and different fiber reinforced biomass composites EI SCOPUS SCIE

作者:Wang, Cheng-zhao;Li, Fang-yi;Wang, Li-ming;Li, Jian-feng;Guo, An-fu;Zhang, Chuan-wei;Liu, Peng

作者机构:[Wang, C.-Z] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Li, F.-Y] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Wang, L.-M] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Li, J.-F] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Guo, A.-F] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Zhang, C.-W] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China;[ Liu, P] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), Shandong University, Jinan, 250061, China

来源:RSC Advances,RSC ADVANCES,2015,Vol.5,Issue.62,49824-49830

WOS被引数:5

资源类型:期刊论文

WOS:000355987900001

共 15 页, 284 条记录

TOP