按条件检索“80”条记录

已选条件: 数据来源: EI × 出版年: 2011 × 机构: 机械工程学院 × 文献类型: 期刊论文 ×
导出
  • 排序
  • 显示
1. 驾驶员疲劳状态监测中的彩色图像光照补偿技术 EI CSCD SCOPUS

作者:朱淑亮;王增才;王保平

作者机构:[朱淑亮] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王增才] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王保平] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:重庆大学学报. 自然科学版,Chongqing Daxue Xuebao/Journal of Chongqing University,2011,Vol.34,Issue.1,42-46

资源类型:期刊论文

2. 基于傅里叶展开的电动力绳系卫星最优控制 EI SCOPUS

作者:潘伟;路长厚;李吉栋;孔令敏;

作者机构:[潘伟;路长厚;李吉栋;孔令敏]山东大学机械工程学院

来源:航空学报,Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica,2011,Vol.32,Issue.9,1714-1721

资源类型:期刊论文

3. Study on finish-turning of NiCr20TiAl nickel-based alloy using Al2O3/TiN-coated carbide tools EI SCOPUS SCIE

作者:Zou, Bin; Chen, Ming; Li, Shasha

作者机构:[Zou, Bin] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Peoples R China.; [Zou, Bin] Shandong Univ, Sch Mech Engn, Ctr Adv Jet Engn Technol CaJET, Jinan 250061, Peoples R China.; [Chen, Ming] Shanghai Jiao Tong Univ, Sch Mech Engn, Shanghai 200240, Peoples R China.; [Li, Shasha] Lute Technol Dev Co, Shandong Special Equipment Inspect Inst, Jinan 250013, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2011,Vol.53,Issue.1-4,81-92

WOS被引数:8

资源类型:期刊论文

WOS:000287756500007

4. 多组元碳化物Ti_xV_(1-x)C弹性性能与稳定性的第一性原理研究 EI CSCD SCOPUS SCIE

作者:王新洪[1];张敏[2];阮立群[3];邹增大[1]

作者机构:[王新洪] 山东大学材料液固结构演变与加工教育部重点实验室, 济南, 山东 250061, 中国.;[邹增大] 山东大学材料液固结构演变与加工教育部重点实验室, 济南, 山东 250061, 中国.;[张敏] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[阮立群] 熊本大学机械系统工程系, 熊本8, 0-8555

来源:中国有色金属学报:英文版,TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA,2011,Vol.21,Issue.6,1373-1377

WOS被引数:9

资源类型:期刊论文

WOS:000293005400027

5. Y-Ce-ZrO2-TiC-A12O3复合陶瓷材料的制备及其摩擦磨损特性研究 SCOPUS EI SCOPUS

作者:许崇海;张永莲;吴光永;赵诗奎;方斌

作者机构:山东轻工业学院机械工程学院,济南250353;山东大学机械工程学院,济南250061;山东轻工业学院机械工程学院,济南,250353;浙江大学机械工程系,杭州,310027

来源:人工晶体学报,Rengong Jingti Xuebao/Journal of Synthetic Crystals,2011,Vol.40,Issue.3,752-757

资源类型:期刊论文

6. 新型滚子链的设计方法及其啮合分析 EI SCOPUS

作者:李兆文;王勇;

作者机构:[李兆文]山东大学机械工程学院高效洁净机械制造教育部重点实验室;[王勇]山东轻工业学院机械工程学院

来源:江苏大学学报(自然科学版),Jiangsu Daxue Xuebao (Ziran Kexue Ban)/Journal of Jiangsu University (Natural Science Edition),2011,Vol.32,Issue.1,11-15

资源类型:期刊论文

7. Numerical simulation for abrasive water jet machining based on ALE algorithm EI SCOPUS SCIE

作者:Gong Wenjun; Wang Jianming; Gao Na

作者机构:[Gong Wenjun; Wang Jianming; Gao Na] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2011,Vol.53,Issue.1-4,247-253

WOS被引数:9

资源类型:期刊论文

WOS:000287756500022

8. An edge-based smoothed finite element method for adaptive analysis EI SCOPUS SCIE

作者:Chen, L.; Zhang, J.; Zang, K. Y.; Jiao, P. G.

作者机构:[Zhang, J.] Natl Univ Singapore, Dept Civil & Environm Engn, Singapore 117576, Singapore.; [Chen, L.] Natl Univ Singapore, Ctr Adv Computat Engn Sci ACES, Singapore 117576, Singapore.; [Chen, L.] Inst High Performance Comp, Singapore 138632, Singapore.; [Zang, K. Y.] Natl Univ Singapore, Dept Mech Engn, Singapore 117576, Singapore.; [Jiao, P. G.] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:STRUCTURAL ENGINEERING AND MECHANICS,2011,Vol.39,Issue.6,767-793

资源类型:期刊论文

WOS:000294793900002

9. 压疮易患组织的血氧参量近红外光谱法监测及压力影响分析 EI CSCD SCOPUS SCIE

作者:李增勇[1];王岩[1];辛青[2];路长厚[1];李建平[1];张亮亮[1]

作者机构:[李增勇] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王岩] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[路长厚] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[李建平] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[张亮亮] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[辛青] 山东大学校医院, 济南, 山东 250012, 中国

来源:光谱学与光谱分析,SPECTROSCOPY AND SPECTRAL ANALYSIS,2011,Vol.31,Issue.6,1490-1493

WOS被引数:2

资源类型:期刊论文

WOS:000291227800011

10. CUTTING PERFORMANCE AND WEAR MECHANISM OF Si_3N_4-BASED NANOCOMPOSITE CERAMIC CUTTING TOOL IN MACHINING OF CAST IRON EI SCOPUS SCIE

作者:Bin Zou;Chuanzhen Huang;Jinpeng Song;Hanlian Liu;Hongtao Zhu

作者机构:[Zou, B] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, China;[ Huang, C] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, China;[ Song, J] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, China;[ Liu, H] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, China;[ Zhu, H] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan, China

来源:Machining Science and Technology,MACHINING SCIENCE AND TECHNOLOGY,2011,Vol.15,Issue.2,192-205

WOS被引数:3

资源类型:期刊论文

WOS:000291273100003

11. Research on product conceptual design based on case-based reasoning EI SCOPUS

作者:Li, Peigang ;Feng, Xianying ;Song, Yaqing

作者机构:[Li, Peigang ;Feng, Xianying ;Song, Yaqing ] School of Mechanical Engineering, Shandong University, Jinan, Shandong, 250061, China

来源:Journal of Convergence Information Technology,2011,Vol.6,Issue.3,173-180

资源类型:期刊论文

12. Size-dependent pull-in instability of electrostatically actuated microbeam-based MEMS EI SCOPUS SCIE

作者:Wang, Binglei; Zhou, Shenjie; Zhao, Junfeng; Chen, Xi

作者机构:[Wang, Binglei; Zhou, Shenjie; Zhao, Junfeng] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Wang, Binglei; Chen, Xi] Columbia Univ, Dept Earth & Environm Engn, New York, NY 10027 USA.; [Chen, Xi] Xi An Jiao Tong Univ, Sch Aerosp, Xian 710049, Peoples R China.; [Chen, Xi] Hanyang Univ, Dept Civil & Environm Engn, Seoul 133791, South Korea.

来源:JOURNAL OF MICROMECHANICS AND MICROENGINEERING,2011,Vol.21,Issue.2

WOS被引数:37

资源类型:期刊论文

WOS:000286630000029

13. Case reuse based product fuzzy configuration EI SCOPUS SCIE

作者:Sisi Xuanyuan;Zhaoliang Jiang;Yan Li;Zhaoqian Li

作者机构:[Xuanyuan, S] Shandong Academy of Information and Communication Technology, Jinan 250101, China;[ Jiang, Z] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Li, Y] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Li, Z] School of Mechanical Engineering, Shandong University, Jinan 250061, China

来源:Advanced engineering informatics,ADVANCED ENGINEERING INFORMATICS,2011,Vol.25,Issue.2,193-197

WOS被引数:8

资源类型:期刊论文

WOS:000290193700008

14. Numerical simulation on heat transfer characteristic of conical spiral tube bundle EI SCOPUS SCIE

作者:Yan Ke; Ge Pei-qi; Su Yan-cai; Meng Hai-tao

作者机构:[Yan Ke; Ge Pei-qi; Su Yan-cai; Meng Hai-tao] Shandong Univ, Sch Mech Engn, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan 250061, Peoples R China.

来源:APPLIED THERMAL ENGINEERING,2011,Vol.31,Issue.2-3,284-292

WOS被引数:8

资源类型:期刊论文

WOS:000284668200017

15. A cutting force model considering influence of radius of curvature for sculptured surface machining EI SCOPUS SCIE

作者:Cao, Qingyuan; Xue, Deyi; Zhao, Jun; Li, Yueen

作者机构:[Cao, Qingyuan; Xue, Deyi] Univ Calgary, Dept Mech & Mfg Engn, Calgary, AB T2N 1N4, Canada.; [Cao, Qingyuan; Zhao, Jun; Li, Yueen] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2011,Vol.54,Issue.5-8,821-835

WOS被引数:13

资源类型:期刊论文

WOS:000290164500036

16. 全可变液压气门机构的气门运动特性 EI CSCD SCOPUS

作者:谢宗法;王岩;王志明;马希利;顾珂韬;常英杰;刘力

作者机构:[谢宗法] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王岩] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[马希利] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[顾珂韬] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[常英杰] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王志明] 山东大学能源与动力工程学院, 济南, 山东 250061, 中国.;[刘力] 山东康达集团有限公司, 烟台, 山东 265701, 中国

来源:内燃机学报,Neiranji Xuebao/Transactions of CSICE (Chinese Society for Internal Combustion Engines),2011,Vol.29,Issue.2,169-174

资源类型:期刊论文

17. Inventory-shortage driven optimisation for product configuration variation EI SCOPUS SCIE

作者:Jiang, Zhaoliang; Sisi Xuanyuan; Li, Lin; Li, Zhaoqian

作者机构:[Jiang, Zhaoliang; Li, Lin] Univ Michigan, Dept Mech Engn, Ann Arbor, MI 48109 USA.; [Jiang, Zhaoliang; Sisi Xuanyuan; Li, Zhaoqian] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH,2011,Vol.49,Issue.4,1045-1060

WOS被引数:12

资源类型:期刊论文

WOS:000285199300006

18. Antifriction characteristics of quasi-nano alumina reinforced with Zr-O-B compounds against cemented carbides EI SCOPUS SCIE

作者:Bin Li;Hong Wang;Jianxin Deng

作者机构:[Li, B] Department of Mechanical Engineering, Luoyang Institute of Science and Technology, Luoyang 471023, Henan Province, China;[ Wang, H] Luoyang Institute of Science and Technology, Luoyang 471023, Henan Province, China;[ Deng, J] School of Mechanical Engineering, Shandong University, Jinan 250061, Shandong Province, China;[ Chang, J] Department of Mechanical Engineering, Luoyang Institute of Science and Technology, Luoyang 471023, Henan Province, China;[ Zhang, H] Department of Mechanical Engineering, Luoyang Institute of Science and Technology, Luoyang 471023, Henan Province, China

来源:International Journal of Refractory Metals & Hard Materials,INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS,2011,Vol.29,Issue.2,177-183

WOS被引数:7

资源类型:期刊论文

WOS:000287429700006

19. Influence of cutting speed on surface integrity for powder metallurgy nickel-based superalloy FGH95 EI SCOPUS SCIE

作者:Jin, Du; Liu, Zhanqiang; Yi, Wan; Su, Guosheng

作者机构:[Jin, Du; Liu, Zhanqiang; Yi, Wan; Su, Guosheng] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2011,Vol.56,Issue.5-8,553-559

WOS被引数:11

资源类型:期刊论文

WOS:000294683800012

20. 海量光谱中激变变星候选体的数据挖掘 EI SCOPUS SCIE

作者:姜斌;罗阿理;赵永恒;

作者机构:[姜斌;罗阿理;赵永恒]中国科学院天文光学重点实验室(国家天文台);[姜斌;罗阿理;赵永恒]山东大学威海分校机电与信息工程学院

来源:光谱学与光谱分析,SPECTROSCOPY AND SPECTRAL ANALYSIS,2011,Vol.31,Issue.8,2278-2282

WOS被引数:1

资源类型:期刊论文

WOS:000293681300059

共 4 页, 80 条记录

TOP