按条件检索“95”条记录

已选条件: 数据来源: EI × 出版年: 2019 × 机构: 机械工程学院 × 文献类型: 期刊论文 ×
导出
  • 排序
  • 显示
1. 3D FEM simulation of the turning process of stainless steel 17-4PH with differently texturized cutting tools EI SCOPUS SCIE

作者:Liu, Guoliang; Huang, Chuanzhen; Su, Rui; Ozel, Tugrul; Liu, Yue; Xu, Longhua

作者机构:[Liu, Guoliang; Huang, Chuanzhen; Su, Rui; Liu, Yue; Xu, Longhua] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, CaJET,Sch Mech Engn, Minist Educ,Natl Demonstrat Ctr Expt Mech Engn Ed, Jinan 250061, Shandong, Peoples R China.; [Liu, Guoliang; Ozel, Tugrul] Rutgers State Univ, Mfg & Automat Res Lab, Dept Ind & Syst Engn, Piscataway, NJ 08854 USA.

来源:INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2019,Vol.155,417-429

资源类型:期刊论文

WOS:000468721800034

2. Investigation on the milling performance of amputating clamping supports for machining with industrial robot EI SCOPUS SCIE

作者:Zhang, Yiran; Guo, Kai; Sun, Jie

作者机构:[Zhang, Yiran; Guo, Kai; Sun, Jie] Shandong Univ, Res Ctr Aeronaut Component Mfg Technol & Equipmen, Jinan 250061, Shandong, Peoples R China.; [Zhang, Yiran; Guo, Kai; Sun, Jie] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech, Minist Educ, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.102,Issue.9-12,3573-3586

资源类型:期刊论文

WOS:000469060700060

3. A high order scheme for unsteady heat conduction equations EI SCOPUS SCIE

作者:Xu, Mingtian

作者机构:[Xu, Mingtian] Shandong Univ, Sch Civil Engn, Dept Engn Mech, Jinan 250061, Shandong, Peoples R China.

来源:APPLIED MATHEMATICS AND COMPUTATION,2019,Vol.348,565-574

资源类型:期刊论文

WOS:000456796600039

4. A hybrid multi-objective optimization approach for energy-absorbing structures in train collisions EI SCOPUS SCIE

作者:Zhang, Honghao; Peng, Yong; Hou, Lin; Tian, Guangdong; Li, Zhiwu

作者机构:[Zhang, Honghao; Peng, Yong; Hou, Lin] Cent S Univ, Sch Traff & Transportat Engn, Key Lab Traff Safety Track, Minist Educ, Changsha 410000, Hunan, Peoples R China.; [Zhang, Honghao; Peng, Yong] Cent S Univ, Joint Int Res Lab Key Technol Rail Traff Safety, Changsha 410000, Hunan, Peoples R China.; [Hou, Lin] Cent S Univ, Natl & Local Joint Engn Res Ctr Safety Technol Ra, Changsha 410000, Hunan, Peoples R China.; [Tian, Guangdong] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Li, Zhiwu] Macau Univ Sci & Technol, Inst Syst Engn, Taipa 999078, Macao, Peoples R China.; [Li, Zhiwu] Xidian Univ, Sch Electromech Engn, Xian 710071, Shaanxi, Peoples R China.

来源:INFORMATION SCIENCES,2019,Vol.481,491-506

WOS被引数:1

资源类型:期刊论文

WOS:000459846300031

5. Surface integrity analysis for high-pressure jet assisted machined Ti-6Al-4V considering cooling pressures and injection positions EI SCOPUS SCIE

作者:Liang, Xiaoliang; Liu, Zhanqiang; Liu, Wentao; Wang, Bing; Yao, Gonghou

作者机构:[Liang, Xiaoliang; Liu, Zhanqiang; Liu, Wentao; Wang, Bing; Yao, Gonghou] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Liang, Xiaoliang; Liu, Zhanqiang; Liu, Wentao; Wang, Bing; Yao, Gonghou] Key Natl Demonstrat Ctr Expt Mech Engn Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.; [Wang, Bing] Georgia Inst Technol, George W Woodruff Sch Mech Engn, Atlanta, GA 30332 USA.

来源:JOURNAL OF MANUFACTURING PROCESSES,2019,Vol.40,149-159

资源类型:期刊论文

WOS:000465057600016

6. Optimal control simulation of elliptical shaft center orbit with the hydraulic servo system EI SCOPUS SCIE

作者:Liang, Peng; Lu, Changhou; Yang, Fazhan

作者机构:[Liang, Peng; Yang, Fazhan] Qingdao Univ Technol, Sch Mech Engn, Qingdao 266033, Peoples R China.; [Lu, Changhou] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Lu, Changhou] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.

来源:PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2019,Vol.233,Issue.2,610-624

资源类型:期刊论文

WOS:000454404900022

7. Visualization analysis of the working process and dynamic characteristics comparison of a hydraulically damped rubber mount with resonant column channel EI SCOPUS SCIE

作者:He, Xin; Wang, Yanan; Lian, Chen; Li, Qingfeng

作者机构:[He, Xin; Wang, Yanan; Lian, Chen; Li, Qingfeng] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [He, Xin; Wang, Yanan; Lian, Chen; Li, Qingfeng] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [He, Xin; Wang, Yanan; Lian, Chen; Li, Qingfeng] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.

来源:JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING,2019,Vol.41,Issue.2

资源类型:期刊论文

WOS:000457211000001

8. Investigation on chip formation and surface integrity in micro end milling of maraging steel EI SCOPUS SCIE

作者:Yao, Yang; Zhu, Hongtao; Huang, Chuanzhen; Wang, Jun; Zhang, Pu; Yao, Peng

作者机构:[Yao, Yang; Zhu, Hongtao; Huang, Chuanzhen; Zhang, Pu; Yao, Peng] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Natl Demonstrat Ctr Expt Mech Engn Educ, Ctr Adv Jet Engn Technol CaJET,Minist Educ,Sch Me, Jinan 250061, Shandong, Peoples R China.; [Wang, Jun] Univ New South Wales, Sch Mech & Mfg Engn, Sydney, NSW 2052, Australia.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.102,Issue.5-8,1973-1984

资源类型:期刊论文

WOS:000469002200064

9. A helical interpolation precision truing and error compensation for arc-shaped diamond grinding wheel EI SCOPUS SCIE

作者:Zhu, Jiahao; Yao, Peng; Wang, Wei; Huang, Chuanzhen; Zhu, Hongtao; Zou, Bin; Liu, Hanlian

作者机构:[Zhu, Jiahao; Yao, Peng; Huang, Chuanzhen; Zhu, Hongtao; Zou, Bin; Liu, Hanlian] Shandong Univ, Sch Mech Engn, Ctr Adv Jet Engn Technol CaJET, Jinan 250061, Shandong, Peoples R China.; [Zhu, Jiahao; Yao, Peng; Huang, Chuanzhen; Zhu, Hongtao; Zou, Bin; Liu, Hanlian] Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.; [Wang, Wei] China Univ Petr East China, Coll Mechan & Elect Engn, Qingdao 266580, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.100,Issue.1-4,167-177

资源类型:期刊论文

WOS:000455946000015

10. Level set-based heterogeneous object modeling and optimization EI SCOPUS SCIE

作者:Liu, Jikai; Chen, Qian; Zheng, Yufan; Ahmad, Rafiq; Tang, Jinyuan; Ma, Yongsheng

作者机构:[Liu, Jikai] Shandong Univ, Sch Mech Engn, Ctr Adv Jet Engn Technol CaJET, Jinan, Shandong, Peoples R China.; [Liu, Jikai] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Chen, Qian] Univ Pittsburgh, Dept Mech Engn & Mat Sci, Pittsburgh, PA 15261 USA.; [Tang, Jinyuan] Cent S Univ, State Key Lab High Performance Complex Mfg, Changsha, Hunan, Peoples R China.; [Zheng, Yufan; Ahmad, Rafiq; Ma, Yongsheng] Univ Alberta, Dept Mech Engn, Edmonton, AB, Canada.

来源:COMPUTER-AIDED DESIGN,2019,Vol.110,50-68

资源类型:期刊论文

WOS:000461264400005

11. Multi-sensors based condition monitoring of rotary machines: An approach of multidimensional time-series analysis EI SCOPUS SCIE

作者:Wang, Teng; Lu, Guoliang; Yan, Peng

作者机构:[Wang, Teng; Lu, Guoliang; Yan, Peng] Shandong Univ, Sch Mech Engn, Natl Demonstrat Ctr Expt Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:MEASUREMENT,2019,Vol.134,326-335

资源类型:期刊论文

WOS:000468223900029

12. 基于公理设计和多色集合的拆卸设备方案设计 EI CSCD SCOPUS

作者:杨得玉; 徐志刚; 朱建峰; 苏开远; 朱卓悦

作者机构:[杨得玉]山东大学机械工程学院, 济南, 山东 250061, 中国;[徐志刚]山东大学机械工程学院, 济南, 山东 250061, 中国;[朱建峰]山东大学机械工程学院, 济南, 山东 250061, 中国;[苏开远]山东大学机械工程学院, 济南, 山东 250061, 中国;[朱卓悦]山东大学深圳研究院, 深圳, 广东 518057, 中国.

来源:计算机集成制造系统,Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS,2019,Vol.25,Issue.10,2476-2486

资源类型:期刊论文

13. Experimental investigation of tool wear in cryogenically treated insert during end milling of hard Ti alloy EI SCOPUS SCIE

作者:Sivalingam, Vinothkumar; Sun, Jie; Selvam, Baskaran; Murugasen, Pradeep Kumar; Yang, Bin; Waqar, Saad

作者机构:[Sivalingam, Vinothkumar; Sun, Jie; Yang, Bin; Waqar, Saad] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Sivalingam, Vinothkumar; Sun, Jie; Yang, Bin; Waqar, Saad] Res Ctr Aeronaut Component Mfg Technol & Equipmen, Jinan, Shandong, Peoples R China.; [Selvam, Baskaran] Madanapalle Inst Technol & Sci, Dept Mech Engn, Angallu 517325, Andhra Pradesh, India.; [Murugasen, Pradeep Kumar] Anna Univ, Dept Mech Engn, Chennai 600025, India.

来源:JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING,2019,Vol.41,Issue.2

资源类型:期刊论文

WOS:000457547200007

14. Preparation and degradation property of magnetic FePBCSi amorphous alloy powder EI SCOPUS SCIE

作者:Li, Xuelian; Wu, Yuying; Yang, Songtao; Cha, Xingjian; Shao, Pengcheng; Wang, Li

作者机构:[Li, Xuelian; Wu, Yuying; Yang, Songtao; Cha, Xingjian; Shao, Pengcheng; Wang, Li] Shandong Univ Weihai, Sch Mech & Elect Engn, Wenhuaxi Rd 180, Weihai 264209, Peoples R China.

来源:JOURNAL OF NON-CRYSTALLINE SOLIDS,2019,Vol.503,284-287

资源类型:期刊论文

WOS:000454381100039

15. A comparison of TIG-MIG hybrid welding with conventional MIG welding in the behaviors of arc, droplet and weld pool EI SCOPUS SCIE

作者:Zong, Ran; Chen, Ji; Wu, Chuansong

作者机构:[Zong, Ran] Shandong Univ Technol, Sch Mech Engn, 266 Xincun Rd, Zibo 255000, Peoples R China.; [Chen, Ji; Wu, Chuansong] Shandong Univ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Shandong, Peoples R China.

来源:JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2019,Vol.270,345-355

资源类型:期刊论文

WOS:000468712800031

16. A dynamic parameter identification method of industrial robots considering joint elasticity EI SCOPUS SCIE

作者:Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao

作者机构:[Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS,2019,Vol.16,Issue.1

资源类型:期刊论文

WOS:000458755700001

17. A simulation model for predicting surface integrity coupled thermal-mechanical effect in turning of Inconel 718 super alloy EI SCOPUS SCIE

作者:Ren, Xiaoping; Liu, Zhanqiang

作者机构:[Ren, Xiaoping; Liu, Zhanqiang] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Ren, Xiaoping; Liu, Zhanqiang] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.100,Issue.5-8,1825-1837

资源类型:期刊论文

WOS:000458000100059

18. A novel implementation of asymptotic homogenization for viscoelastic composites with periodic microstructures EI SCOPUS SCIE

作者:Li, Quhao; Chen, Wenjiong; Liu, Shutian; Wang, Jiaxing

作者机构:[Li, Quhao; Chen, Wenjiong; Liu, Shutian] Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China.; [Li, Quhao] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Wang, Jiaxing] AVIC Shenyang Aircraft Design Res Inst, Shenyang 110035, Liaoning, Peoples R China.

来源:COMPOSITE STRUCTURES,2019,Vol.208,276-286

资源类型:期刊论文

WOS:000451025300024

19. 数字孪生五维模型及十大领域应用 EI CSCD SCOPUS

作者:陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民

作者机构:[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]北京航空航天大学自动化科学与电气工程学院.;[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]山东大学机械工程学院.;[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]北自所(北京)科技发展有限公司.;[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]国家机床质量监督检验中心.;[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]沈阳飞机设计研究所.;[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]中国空间技术研究院北京卫星环境工程研究所.;[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]机械工业第六设计研究院有限公司.;[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]中国兵器工业集团第五五研究所.;[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]北京航天拓扑高科技有限公司.;[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]北京航天万源科技有限公司.;[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]北京必可测科技股份有限公司.;[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]上海航天设备制造总厂.;[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]国网电力科学研究院.;[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]国网电子商务有限公司光伏云事业部.;[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]中国电子科技集团第十研究所.;[陶飞;刘蔚然;张萌;胡天亮;戚庆林;张贺;隋芳媛;王田;徐慧;黄祖广;马昕;张连超;程江峰;姚念奎;易旺民;朱恺真;张新生;孟凡军;金小辉;刘中兵;何立荣;程辉;周二专;李洋;吕倩;罗椅民]国家康复辅具研究中心发展战略研究所

来源:计算机集成制造系统,Computer Integrated Manufacturing Systems,2019,Vol.25,Issue.1,1-18

资源类型:期刊论文

20. 基于由粗到精定位的列车驾驶员瞳孔和眼角点检测 EI CSCD SCOPUS

作者:王增才; 赵磊; 房素素; 张国新; 齐亚州

作者机构:[王增才]山东大学机械工程学院;;高效洁净机械制造教育部重点实验室, ;;高效洁净机械制造教育部重点实验室, 济南;;济南, 山东;;山东 250061;;250061, 中国;[赵磊]山东大学机械工程学院;;高效洁净机械制造教育部重点实验室, ;;高效洁净机械制造教育部重点实验室, 济南;;济南, 山东;;山东 250061;;250061, 中国;[房素素]山东大学机械工程学院;;高效洁净机械制造教育部重点实验室, ;;高效洁净机械制造教育部重点实验室, 济南;;济南, 山东;;山东 250061;;250061, 中国;[张国新]山东大学机械工程学院;;高效洁净机械制造教育部重点实验室, ;;高效洁净机械制造教育部重点实验室, 济南;;济南, 山东;;山东 250061;;250061, 中国;[齐亚州]山东大学机械工程学院;;高效洁净机械制造教育部重点实验室, ;;高效洁净机械制造教育部重点实验室, 济南;;济南, 山东;;山东 250061;;250061, 中国.

来源:铁道学报,Tiedao Xuebao/Journal of the China Railway Society,2019,Vol.41,Issue.10,61-67

资源类型:期刊论文

共 5 页, 95 条记录

TOP