按条件检索“51”条记录

已选条件: 出版年: 2018 × 机构: 机械工程学院 × 文献类型: conferencepaper ×
导出
  • 排序
  • 显示
1. Decoupling design based on power dispatching management cloud computing platform EI SCOPUS

作者:Xu, Zheng ;Guan, Ti ;Li, Huicong ;Ma, Qiang ;Geng, Yujie ;Zhang, Pei ;Wang, Yanling

作者机构:[Xu, Zheng ;Guan, Ti ;Li, Huicong ;Ma, Qiang ;Geng, Yujie ] State Grid Dispatching Control Center, Shandong Electric Power Company, No. 150, Jinger Road, Jinan, Shandong, China;[Zhang, Pei ;Wang, Yanling ] School of Mechanical, Electrical and Information Engineering, Shandong University, Shandong, Weihai, China

会议名称:2nd International Conference on Big Data Research, ICBDR 2018

会议日期:27 October 2018 through 29 October 2018

来源:ACM International Conference Proceeding Series,2018206-210

资源类型:会议论文;期刊论文

2. A novel ambulance stretcher based on parallel mechanism and its vibration isolation per-formace analysis EI SCOPUS

作者:Xiang, Gao ;Junchuan, Niu ;Ze, Li

作者机构:[Xiang, Gao ;Junchuan, Niu ;Ze, Li ] School of Mechanical Engineering, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Jinan, China

会议名称:25th International Congress on Sound and Vibration 2018: Hiroshima Calling, ICSV 2018

会议日期:8 July 2018 through 12 July 2018

来源:25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling,2018,Vol.2,1064-1071

资源类型:会议论文;期刊论文

3. Motion model of fish-like underwater vehicle and its effect on hydrodynamic performance EI SCOPUS

作者:Xuel, Gang ;Liu, Yanjun ;Chen, Zhi ;Li, Shizhen

作者机构:[Xuel, Gang ;Liu, Yanjun ;Chen, Zhi ] Key Laboratory of High-efficiency and Clean Mechanical Manufacture, School of Mechanical Engineering, Shandong University, Jinan, China;[Xuel, Gang ;Liu, Yanjun ;Li, Shizhen ] Institute of Marine Science and Technology, Shandong University, Jinan, China

会议名称:11th International Symposium on Mechatronics and its Applications, ISMA 2018

会议日期:4 March 2018 through 6 March 2018

来源:11th International Symposium on Mechatronics and its Applications, ISMA 2018,2018,Vol.2018-January,1-5

资源类型:会议论文;期刊论文

4. Development of a Compact XYZ Nanopositioner Supporting Optical Scanning EI SCOPUS

作者:Wang, Yue ;Yan, Peng

作者机构:[Wang, Yue ;Yan, Peng ] Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China;[Wang, Yue ;Yan, Peng ] Suzhou Institute of Shandong University, Suzhou, China

会议名称:8th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2018

会议日期:13 August 2018 through 17 August 2018

来源:2018 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2018 - Proceedings,2018288-293

资源类型:会议论文;期刊论文

5. Robust Techniques for Sequential Signal Separation EI SCOPUS

作者:Zhao, Yongjian ;Jiang, Bin

作者机构:[Zhao, Yongjian ;Jiang, Bin ] School of Mechanical, Electrical and Information Engineering, Shandong University, Shandong; 264209, China

会议名称:11th International Conference on Intelligent Computation Technology and Automation, ICICTA 2018

会议日期:22 September 2018 through 23 September 2018

来源:Proceedings - 11th International Conference on Intelligent Computation Technology and Automation, ICICTA 2018,2018120-124

资源类型:会议论文;期刊论文

6. Study the effect of heat treatment on the relative density of SLM built parts of alsi10mg alloy EI SCOPUS

作者:Majeed, A. ;Zhang, Y.F. ;Lv, J.X. ;Peng, T. ;Waqar, S. ;Atta, Z.

作者机构:[Majeed, A. ;Zhang, Y.F. ;Lv, J.X. ;Atta, Z. ] Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University, Shaanxi; 710072, China;[Waqar, S. ] School of Mechanical Engineering, Shandong University, Jinan, China;[Peng, T. ] Key Laboratory of 3D Printing Process and Equipment of Zhejiang Province, Institute of Industrial Engineering, School of Mechanical Engineering, Zhejiang University, Hangzhou; 310027, China

会议名称:48th International Conference on Computers and Industrial Engineering, CIE 2018

会议日期:2 December 2018 through 5 December 2018

来源:Proceedings of International Conference on Computers and Industrial Engineering, CIE,2018,Vol.2018-December

资源类型:会议论文;期刊论文

7. Investigation on the Precision Loss of Ball Screw Considering the Full Ball Load Distribution EI SCOPUS

作者:Zhao, Jiajia ;Lin, Mingxing ;Song, Xianchun ;Jiang, Hongkui ;Wu, Xiaojian

作者机构:[Zhao, Jiajia ;Lin, Mingxing ;Wu, Xiaojian ] National Demonstration Center for Experimental Mechanical Engineering Education, Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Ministry of Eduction, School of Mechanical Engineering, Shandong University, Jinan, Shandong; 250061, China;[Song, Xianchun ;Jiang, Hongkui ] Key Laboratory of Mechanical Engineering Innovation Technology, School of Mechanical and Electrical Engineering, Shandong Jianzhu University, Jinan, Shandong; 250101, China

会议名称:2018 International Conference on Smart Materials Applications, ICSMA 2018

会议日期:26 January 2018 through 28 January 2018

来源:IOP Conference Series: Materials Science and Engineering,2018,Vol.422,Issue.1

资源类型:会议论文;期刊论文

8. Design of a PC-based Open Industrial Robot Control System Integrated with Real-Time Machine Vision* EI SCOPUS

作者:Liu, Yanan ;Hu, Tianliang ;Ni, Hepeng ;Zhang, Chengrui ;Lin, Bao ;Judd, Euan

作者机构:[Liu, Yanan ;Judd, Euan ] Bristol Robotics Laboratory, University of Bristol, Bristol; BS16 1QY, United Kingdom;[Zhang, Chengrui ] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan; 250061, China;[Hu, Tianliang ;Ni, Hepeng ;Zhang, Chengrui ;Lin, Bao ] School of Mechanical Engineering, Shan-dong University, China

会议名称:1st WRC Symposium on Advanced Robotics and Automation, WRC SARA 2018

会议日期:2018-08-16 00:00:00

来源:2018 WRC Symposium on Advanced Robotics and Automation, WRC SARA 2018 - Proceeding,2018289-295

资源类型:会议论文;期刊论文

9. Precision Marketing Scheme based on Integrating Spatio-temporal Data Clustering and Neural Network EI SCOPUS

作者:Liu, Su Ying

作者机构:[Liu, Su Ying ] School of Mechanical Engineering, Shandong University, Jinan Shandong; 250002, China

会议名称:1st International Conference on Advanced Algorithms and Control Engineering, ICAACE 2018

会议日期:10 August 2018 through 12 August 2018

来源:Journal of Physics: Conference Series,2018,Vol.1087,Issue.3

资源类型:会议论文;期刊论文

10. Analyzing the performance of self-developed cermet micro end mills in machining of TC4 alloy micro-grooves EI SCOPUS

作者:Wang, Yishun ;Zou, Bin ;Wang, Zhe ;Huang, Chuanzhen ;Liu, Zhanqiang

作者机构:[Wang, Yishun ;Zou, Bin ;Wang, Zhe ;Huang, Chuanzhen ;Liu, Zhanqiang ] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan; 250061, China;[Wang, Yishun ;Zou, Bin ;Wang, Zhe ;Huang, Chuanzhen ;Liu, Zhanqiang ] National Demonstration Center for Experimental Mechanical Engineering Education, China;[Wang, Yishun ;Zou, Bin ;Wang, Zhe ;Huang, Chuanzhen ;Liu, Zhanqiang ] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China

会议名称:4th CIRP Conference on Surface Integrity, CIRP CSI 2018

会议日期:11 July 2018 through 13 July 2018

来源:Procedia CIRP,2018,Vol.71,424-428

资源类型:会议论文;期刊论文

11. Center of mass and friction coefficient exploration of unknown object for a robotic grasping manipulation EI SCOPUS

作者:Zhao, Zhongqiu ;Li, Xueyong ;Lu, Changhou ;Wang, Yonghui

作者机构:[Zhao, Zhongqiu ;Li, Xueyong ;Lu, Changhou ] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, China;[Wang, Yonghui ] Department of Physical Medicine and Rehabilitation, Qilu Hospital, Shandong University, Jinan, China

会议名称:15th IEEE International Conference on Mechatronics and Automation, ICMA 2018

会议日期:5 August 2018 through 8 August 2018

来源:Proceedings of 2018 IEEE International Conference on Mechatronics and Automation, ICMA 2018,20182352-2357

资源类型:会议论文;期刊论文

12. Improving Structural Change Detection using a Differential Equation-based Prediction Model for Condition Monitoring of Rotating Machines EI SCOPUS

作者:Wen, Xin ;Lu, Guoliang ;Yan, Peng

作者机构:[Wen, Xin ;Lu, Guoliang ;Yan, Peng ] Key Laboratory of High Efficiency and Clean Mechanical Manufacturing of MOE, National Demonstration Center for Experimental Mechanical Engineering Education, School of Mechanical Engineering, Shandong University, Jinan; 250061, China

会议名称:2018 IEEE International Conference on Prognostics and Health Management, ICPHM 2018

会议日期:11 June 2018 through 13 June 2018

来源:2018 IEEE International Conference on Prognostics and Health Management, ICPHM 2018,2018

资源类型:会议论文;期刊论文

13. The Process of Engine Reliability Fuzzy Prediction EI SCOPUS

作者:Zhang, Chuan ;Wang, Shaokun ;Zhang, Qiang ;Liu, Zhongzheng

作者机构:[Zhang, Chuan ;Wang, Shaokun ;Zhang, Qiang ;Liu, Zhongzheng ] School of Mechanical Engineering, Shandong University, Jinan; 250061, China;[Zhang, Chuan ;Wang, Shaokun ;Zhang, Qiang ;Liu, Zhongzheng ] Shandong Labor Vocational and Technical College, China

会议名称:5th International Conference on Mechanics and Mechatronics Research, ICMMR 2018

会议日期:19 July 2018 through 21 July 2018

来源:IOP Conference Series: Materials Science and Engineering,2018,Vol.417,Issue.1

资源类型:会议论文;期刊论文

14. Study on improving accuracy in robotic milling of aluminum alloy EI SCOPUS

作者:Sui, Shaochun ;Guo, Kai ;Sun, Jie ;Zhang, Yiran

作者机构:[Sui, Shaochun ] CAC Chengdu Aircraft Industrial (Group) Co., Ltd., Chengdu; 610000, China;[Guo, Kai ;Sun, Jie ;Zhang, Yiran ] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan; 250061, China

会议名称:ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018

会议日期:18 June 2018 through 22 June 2018

来源:ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018,2018,Vol.3

资源类型:会议论文;期刊论文

15. Analysis on the DTR of transmission lines to improve the utilization of wind power EI SCOPUS

作者:Wang, Yanling ;Yang, Ming ;Liang, Likai ;Mo, Yang ;Wu, Mengmeng

作者机构:[Wang, Yanling ;Liang, Likai ;Mo, Yang ;Wu, Mengmeng ] School of Mechanical, Electrical and Information Engineering Shandong University (Weihai, Weihai, China;[Yang, Ming ] Key Laboratory of Power System Intelligent Dispatch and Control Shandong University, Jinan, China

会议名称:2018 IEEE Industry Applications Society Annual Meeting, IAS 2018

会议日期:23 September 2018 through 27 September 2018

来源:2018 IEEE Industry Applications Society Annual Meeting, IAS 2018,2018

资源类型:会议论文;期刊论文

16. Smith Predictor Based ∞ Control for Piezoelectric Nano Stages with Time Delays SCOPUS

作者:Zhang Z.; Yan P.

作者机构:[Zhang, Z] Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan 250061, China Suzhou Institute of Shandong University, Suzhou 215123, China;[ Yan, P] Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan 250061, China Suzhou Institute of Shandong University, Suzhou 215123, China, School of Automation Science and Electrical Engineering, Beihang University, Beijing, China

来源:2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018,2018

资源类型:期刊论文

17. A Large Range X-Y Parallel Micro-motion System with Optical Encoder Displacement Feedback EI SCOPUS

作者:Zhang, Zhiming ;Hao, Guangbo ;Yan, Peng

作者机构:[Zhang, Zhiming ;Yan, Peng ] Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China;[Hao, Guangbo ] School of Engineering-Electrical and Electronic Engineering, University College Cork, Cork, Ireland;[Yan, Peng ] Suzhou Institute of Shandong University, Suzhou, China

会议名称:8th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2018

会议日期:13 August 2018 through 17 August 2018

来源:2018 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2018 - Proceedings,2018283-287

资源类型:会议论文;期刊论文

18. Dynamic model and natural frequencies analysis for improved 3-RR^U parallel mechanism SCOPUS

作者:Li Z.; Niu J.; Tian J.

作者机构:[Li, Z] Shandong University, School of Mechanical Engineering, Key Laboratory of High-Efficiency and Clean Mechanical Manufacture, Jinan, China;[ Niu, J] Shandong University, School of Mechanical Engineering, Key Laboratory of High-Efficiency and Clean Mechanical Manufacture, Jinan, China;[ Tian, J] Shandong University, School of Mechanical Engineering, Key Laboratory of High-Efficiency and Clean Mechanical Manufacture, Jinan, China

来源:25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling,2018,Vol.2,1072-1078

资源类型:期刊论文

19. Vibration of thin cylindrical shells on an elastic foundation coupled with multiple discrete stiffnesses EI SCOPUS

作者:Yang, Fuchun ;Qiu, Wenlei

作者机构:[Yang, Fuchun ;Qiu, Wenlei ] School of Mechanical Engineering, Shandong University, Jinan; 250061, China;[Yang, Fuchun ] Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan; 250061, China

会议名称:3rd International Conference on Design, Mechanical and Material Engineering, D2ME 2018

会议日期:27 September 2018 through 29 September 2018

来源:MATEC Web of Conferences,2018,Vol.237

资源类型:会议论文;期刊论文

20. Inherent characteristics analysis of compound planetary gear set EI SCOPUS

作者:Li, G. ;Xiong, X. ;Niu, L. ;Zhang, X. ;Zhao, B.

作者机构:[Li, G. ;Xiong, X. ;Niu, L. ;Zhang, X. ;Zhao, B. ] Ministry of Education, Taiyuan University of Technology, Key Laboratory of Advance Transducers and Intelligent Control System, Taiyuan; 030024, China;[Li, G. ] Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, School of Mechanical Engineering, Jinan; 250061, China

会议名称:15th International Conference on Ubiquitous Robots, UR 2018

会议日期:27 June 2018 through 30 June 2018

来源:2018 15th International Conference on Ubiquitous Robots, UR 2018,2018914-919

资源类型:会议论文;期刊论文

共 3 页, 51 条记录

TOP