按条件检索“2,739”条记录

已选条件: 数据来源: EI × 机构: 机械工程学院 × 文献类型: 期刊论文 × 文献类型: proceedingspaper ×
导出
  • 排序
  • 显示
1. Robust fixture design of compliant assembly process based on a support vector regression model EI SCOPUS SCIE

作者:Yu, Kuigang

作者机构:[Yu, Kuigang] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Yu, Kuigang] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.; [Yu, Kuigang] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.103,Issue.1-4,111-126

资源类型:期刊论文

WOS:000475921300010

2. Experimental investigation of tool wear in cryogenically treated insert during end milling of hard Ti alloy EI SCOPUS SCIE

作者:Sivalingam, Vinothkumar; Sun, Jie; Selvam, Baskaran; Murugasen, Pradeep Kumar; Yang, Bin; Waqar, Saad

作者机构:[Sivalingam, Vinothkumar; Sun, Jie; Yang, Bin; Waqar, Saad] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Sivalingam, Vinothkumar; Sun, Jie; Yang, Bin; Waqar, Saad] Res Ctr Aeronaut Component Mfg Technol & Equipmen, Jinan, Shandong, Peoples R China.; [Selvam, Baskaran] Madanapalle Inst Technol & Sci, Dept Mech Engn, Angallu 517325, Andhra Pradesh, India.; [Murugasen, Pradeep Kumar] Anna Univ, Dept Mech Engn, Chennai 600025, India.

来源:JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING,2019,Vol.41,Issue.2

资源类型:期刊论文

WOS:000457547200007

3. A simulation model for predicting surface integrity coupled thermal-mechanical effect in turning of Inconel 718 super alloy EI SCOPUS SCIE

作者:Ren, Xiaoping; Liu, Zhanqiang

作者机构:[Ren, Xiaoping; Liu, Zhanqiang] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Ren, Xiaoping; Liu, Zhanqiang] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.100,Issue.5-8,1825-1837

资源类型:期刊论文

WOS:000458000100059

4. 考虑产品故障特征的目标选择性拆卸序列规划 EI CSCD SCOPUS

作者:杨得玉; 徐志刚; 朱建峰; 苏开远; 刘维民

作者机构:[杨得玉]山东大学机械工程学院, 济南, 山东 250061, 中国;[徐志刚]山东大学机械工程学院, 济南, 山东 250061, 中国;[朱建峰]山东大学机械工程学院, 济南, 山东 250061, 中国;[苏开远]山东大学机械工程学院, 济南, 山东 250061, 中国;[刘维民]山东大学深圳研究院, 深圳, 广东 518057, 中国.

来源:哈尔滨工业大学学报,Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology,2019,Vol.51,Issue.7,160-170

资源类型:期刊论文

5. High-speed intermittent turning of GH2132 alloy with Si3N4/(W, Ti)C/Co graded ceramic tool EI SCOPUS SCIE

作者:Tian, Xianhua; Zhao, Jun; Yang, Haifeng; Wang, Zhongbin; Liu, Hao

作者机构:[Tian, Xianhua; Yang, Haifeng; Wang, Zhongbin; Liu, Hao] China Univ Min & Technol, Sch Mech Engn, Xuzhou 221116, Jiangsu, Peoples R China.; [Tian, Xianhua; Yang, Haifeng; Wang, Zhongbin; Liu, Hao] China Univ Min & Technol, Jiangsu Key Lab Mine Mech & Elect Equipment, Xuzhou 221116, Jiangsu, Peoples R China.; [Zhao, Jun] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.100,Issue.1-4,401-408

资源类型:期刊论文

WOS:000455946000035

6. Lead zirconate titanate and barium titanate bi-layer ferroelectric films on Si EI SCOPUS SCIE

作者:Wang, Yingying; Yan, Jing; Cheng, Hongbo; Chen, Ning; Yan, Peng; Yang, Feng; Ouyang, Jun

作者机构:[Wang, Yingying; Yan, Jing; Cheng, Hongbo; Ouyang, Jun] Shandong Univ, Sch Mat Sci & Engn, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Shandong, Peoples R China.; [Wang, Yingying; Chen, Ning; Yan, Peng] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Wang, Yingying; Ouyang, Jun] Shandong Univ, Suzhou Inst, Suzhou 215123, Peoples R China.; [Cheng, Hongbo] Nanjing Univ Posts & Telecommun, Coll Elect & Opt Engn, Nanjing 210023, Jiangsu, Peoples R China.; [Yang, Feng] Univ Jinan, Sch Mat Sci & Engn, Jinan 250022, Shandong, Peoples R China.

来源:CERAMICS INTERNATIONAL,2019,Vol.45,Issue.7,9032-9037

资源类型:期刊论文

WOS:000463688500119

7. Sustainability assessment of dry turning Ti-6Al-4V employing uncoated cemented carbide tools as clean manufacturing process EI SCOPUS SCIE

作者:Liang, Xiaoliang; Liu, Zhanqiang; Liu, Wentao; Li, Xiaojun

作者机构:[Liang, Xiaoliang; Liu, Zhanqiang; Liu, Wentao; Li, Xiaojun] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Liang, Xiaoliang; Liu, Zhanqiang; Liu, Wentao; Li, Xiaojun] Key Natl Demonstrat Ctr Expt Mech Engn Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:JOURNAL OF CLEANER PRODUCTION,2019,Vol.214,279-289

资源类型:期刊论文

WOS:000458228300027

8. A dynamic parameter identification method of industrial robots considering joint elasticity EI SCOPUS SCIE

作者:Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao

作者机构:[Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Ni, Hepeng; Zhang, Chengrui; Hu, Tianliang; Wang, Teng; Chen, Qizhi; Chen, Chao] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS,2019,Vol.16,Issue.1

资源类型:期刊论文

WOS:000458755700001

9. Hydraulic system elaboration and simulation for single-drive light-load monorail locomotive in fully mechanized coal mining applications CPCI-S EI

作者:Song, Z. A.; Jiang, F.

作者机构:[Song, Z. A.; Jiang, F.] Shandong Univ Sci & Technol, Coll Mech & Elect Engn, Qingdao, Shandong, Peoples R China.

会议名称:7th Global Conference on Materials Science and Engineering (CMSE)

会议日期:NOV 01-04, 2018

来源:7TH GLOBAL CONFERENCE ON MATERIALS SCIENCE AND ENGINEERING (CMSE2018),2019,Vol.474,Issue.1

资源类型:会议论文

WOS:000462360700006

10. 成熟度驱动的开发过程耦合活动迭代模型 EI CSCD SCOPUS

作者:殷复鹏;高琦;纪雪

作者机构:[殷复鹏;高琦;纪雪]山东大学机械工程学院,山东济南250061,中国.;[殷复鹏;纪雪]山东大学高效洁净机械制造教育部重点实验室,山东济南250061,中国.;[高琦]山东大学深圳研究院,广东深圳518057,中国

来源:计算机集成制造系统,Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS,2019,Vol.25,Issue.2,277-283

资源类型:期刊论文

11. 石墨烯纳米片增韧Al_2O_3基纳米复合陶瓷刀具材料 EI CSCD SCOPUS

作者:孟祥龙;衣明东;肖光春;陈照强;许崇海

作者机构:[孟祥龙;衣明东;肖光春;陈照强;许崇海]齐鲁工业大学机械与汽车工程学院.;[孟祥龙;衣明东;肖光春;陈照强;许崇海]齐鲁工业大学山东省高校轻工装备先进制造与测控技术重点实验室.;[孟祥龙;衣明东;肖光春;陈照强;许崇海]山东大学机械工程学院

来源:材料工程,Journal of Materials Engineering,2019,Vol.47,Issue.1,25-31

资源类型:期刊论文

12. 基于绿色特征及质量功能配置技术的机电产品绿色性能优化 EI CSCD SCOPUS

作者:王黎明; 李龙; 付岩; 李方义; 彭鑫; 王耿

作者机构:[王黎明]山东大学;;山东大学机械工程学院, 高效洁净机械制造教育部重点实验室;;, 济南;;济南, ;; 250061;;250061;[李龙]山东大学;;山东大学机械工程学院, 高效洁净机械制造教育部重点实验室;;, 济南;;济南, ;; 250061;;250061;[付岩]山东大学;;山东大学机械工程学院, 高效洁净机械制造教育部重点实验室;;, 济南;;济南, ;; 250061;;250061;[李方义]山东大学;;山东大学机械工程学院, 高效洁净机械制造教育部重点实验室;;, 济南;;济南, ;; 250061;;250061;[彭鑫]山东大学;;山东大学机械工程学院, 高效洁净机械制造教育部重点实验室;;, 济南;;济南, ;; 250061;;250061;[王耿]山东大学;;山东大学机械工程学院, 高效洁净机械制造教育部重点实验室;;, 济南;;济南, ;; 250061;;250061.

来源:中国机械工程,Zhongguo Jixie Gongcheng/China Mechanical Engineering,2019,Vol.30,Issue.19,2349-2355

资源类型:期刊论文

13. A signal period detection algorithm based on morphological self-complementary Top-Hat transform and AMDF EI SCOPUS

作者:Han, Zhao ;Wang, Xiaoli

作者机构:[Han, Zhao ;Wang, Xiaoli ] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai; 264209, China

来源:Information (Switzerland),2019,Vol.10,Issue.1

资源类型:期刊论文

14. Modeling and Analysis of the Process Energy for Cylindrical Drawing EI SCOPUS SCIE

作者:Li, Lei; Huang, Haihong; Zhao, Fu; Zou, Xiang; Mendis, Gamini P.; Luan, Xiaona; Liu, Zhifeng; Sutherland, John W.

作者机构:[Li, Lei; Huang, Haihong; Zou, Xiang; Liu, Zhifeng] Hefei Univ Technol, Sch Mech Engn, Hefei 230009, Anhui, Peoples R China.; [Zhao, Fu] Purdue Univ, Sch Mech Engn, W Lafayette, IN 47907 USA.; [Zhao, Fu; Mendis, Gamini P.; Sutherland, John W.] Purdue Univ, Environm & Ecol Engn, W Lafayette, IN 47907 USA.; [Luan, Xiaona] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Luan, Xiaona] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan 250061, Shandong, Peoples R China.

来源:JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2019,Vol.141,Issue.2

资源类型:期刊论文

WOS:000455219600002

15. Dynamic response of ceramic material subjected to impact of hard particle EI SCOPUS SCIE

作者:Lv, Zhe; Hou, Rongguo; Tian, Yebing; Huang, Chuanzhen; Zhu, Hongtao; Wang, Jun

作者机构:[Lv, Zhe; Hou, Rongguo; Tian, Yebing] Shandong Univ Technol, Sch Mech Engn, Zibo 255000, Peoples R China.; [Huang, Chuanzhen; Zhu, Hongtao] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Ctr Adv Jet Engn Technol CaJET,Minist Educ, Jinan 250061, Shandong, Peoples R China.; [Wang, Jun] Univ New South Wales, Sch Mech & Mfg Engn, Sydney, NSW 2052, Australia.

来源:MATERIALS RESEARCH EXPRESS,2019,Vol.6,Issue.4

资源类型:期刊论文

WOS:000455869400002

16. A parametric interpolation method based on prediction and iterative compensation EI SCOPUS SCIE

作者:Ni, Hepeng; Zhang, Chengrui; Chen, Chao; Hu, Tianliang; Liu, Yanan

作者机构:[Ni, Hepeng; Zhang, Chengrui; Chen, Chao; Hu, Tianliang] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Ni, Hepeng; Zhang, Chengrui; Chen, Chao; Hu, Tianliang] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Ni, Hepeng; Zhang, Chengrui; Chen, Chao; Hu, Tianliang] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.; [Liu, Yanan] Univ Bristol, Bristol Robot Lab, Bristol, Avon, England.

来源:INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS,2019,Vol.16,Issue.1

资源类型:期刊论文

WOS:000458755300001

17. The grinding force modeling and experimental study of ZrO2 ceramic materials in ultrasonic vibration assisted grinding EI SCIE

作者:Yang, Zhichao; Zhu, Lida; Lin, Bin; Zhang, Guixiang; Ni, Chenbing; Sui, Tianyi

作者机构:[Yang, Zhichao; Zhu, Lida; Ni, Chenbing] Northeastern Univ, Sch Mech Engn & Automat, Shenyang 110819, Liaoning, Peoples R China.; [Lin, Bin; Sui, Tianyi] Tianjing Univ, Key Lab Adv Ceram & Machining Technol, Tianjin 300072, Peoples R China.; [Zhang, Guixiang] Shandong Univ Technol, Sch Mech Engn, Zibo 255000, Peoples R China.

来源:CERAMICS INTERNATIONAL,2019,Vol.45,Issue.7,8873-8889

资源类型:期刊论文

WOS:000463688500102

18. Microstructure and properties of Al alloy ER5183 deposited by variable polarity cold metal transfer EI SCOPUS SCIE

作者:Zhang, Bowen; Wang, Chao; Wang, Zhaohui; Zhang, Laiqi; Gao, Qiang

作者机构:[Zhang, Bowen; Zhang, Laiqi; Gao, Qiang] Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 100083, Peoples R China.; [Wang, Chao] Inner Mongolia Univ Sci & Technol, Sch Mat & Met, Baotou 014010, Peoples R China.; [Wang, Zhaohui] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2019,Vol.267,167-176

资源类型:期刊论文

WOS:000458225600017

19. A novel implementation of asymptotic homogenization for viscoelastic composites with periodic microstructures EI SCOPUS SCIE

作者:Li, Quhao; Chen, Wenjiong; Liu, Shutian; Wang, Jiaxing

作者机构:[Li, Quhao; Chen, Wenjiong; Liu, Shutian] Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China.; [Li, Quhao] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Wang, Jiaxing] AVIC Shenyang Aircraft Design Res Inst, Shenyang 110035, Liaoning, Peoples R China.

来源:COMPOSITE STRUCTURES,2019,Vol.208,276-286

资源类型:期刊论文

WOS:000451025300024

20. Size-dependent responses of micro-end mill based on strain gradient elasticity theory EI SCOPUS SCIE

作者:Du, Yicong; Song, Qinghua; Liu, Zhanqiang; Wang, Bing; Wan, Yi

作者机构:[Du, Yicong; Song, Qinghua; Liu, Zhanqiang; Wang, Bing; Wan, Yi] Shandong Univ, Sch Mech Engn, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Song, Qinghua; Liu, Zhanqiang; Wan, Yi] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.100,Issue.5-8,1839-1854

资源类型:期刊论文

WOS:000458000100060

共 137 页, 2,739 条记录

TOP