按条件检索“103”条记录

已选条件: 数据来源: EI × 数据来源: WOS × 出版年: 2010 × 机构: 机械工程学院 × 文献类型: 期刊论文 ×
导出
  • 排序
  • 显示
21. Numerical simulation of laminar flow field in a stirred tank with a Rushton impeller and a pitch 4-bladed turbine EI SCOPUS

作者:Zhou, Shen-Jie ;Luan, De-Yu ;Chen, Song-Ying

作者机构:[Zhou, Shen-Jie ;Luan, De-Yu ;Chen, Song-Ying ] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[Luan, De-Yu ] School of Mechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061, China

来源:Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics,2010,Vol.31,Issue.SUPPL.,257-260

资源类型:期刊论文

22. Investigation on laminar flow field performance in a stirred tank with different dual-impeller combinations EI SCOPUS

作者:Luan, De-Yu ;Zhou, Shen-Jie ;Chen, Song-Ying

作者机构:[Luan, De-Yu ;Zhou, Shen-Jie ;Chen, Song-Ying ] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[Luan, De-Yu ] School of Mechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061, China

来源:Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics,2010,Vol.31,Issue.SUPPL.,209-212

资源类型:期刊论文

23. High energy milling method to prepare Al/WC composite coatings in Al-Si alloys EI SCOPUS SCIE

作者:Wu Yuying; Liu Xiangfa; Ma Guolong; Li Chong; Zhang Junqing

作者机构:[Wu Yuying; Liu Xiangfa; Ma Guolong; Li Chong; Zhang Junqing] Shandong Univ, Minist Educ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Jinan 250061, Shandong, Peoples R China.; [Wu Yuying] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:JOURNAL OF ALLOYS AND COMPOUNDS,2010,Vol.497,Issue.1-2,139-141

WOS被引数:9

资源类型:期刊论文

WOS:000278744600033

24. Failure analysis of the brittle fracture of a thick-walled 20 steel pipe in an ammonia synthesis unit EI SCOPUS SCIE

作者:Haoxuan Cui;Weiqiang Wang;Aiju Li

作者机构:[Cui, H] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China;[ Wang, W] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China;[ Li, A] Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China, School of Materials Science and Engineering, Shandong University, Jinan 250061, Shandong, China;[ Li, M] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China;[ Xu, S] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China;[ Liu, H] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, China, Research Center of Safety Guarantee and Assessment to Special Equipment, Shandong University, Jinan 250061, China

来源:Engineering failure analysis,ENGINEERING FAILURE ANALYSIS,2010,Vol.17,Issue.6,1359-1376

WOS被引数:6

资源类型:期刊论文

WOS:000280885100010

25. Research on material constitutive model at large range of strain and strain rate EI SCOPUS

作者:Fu, Xiu-Li ;Pan, Yong-Zhi ;Ai, Xing ;Wan, Yi

作者机构:[Fu, Xiu-Li ;Pan, Yong-Zhi ] Department of Mechanical Engineering, University of Jinan, Jinan 250022, China;[Ai, Xing ;Wan, Yi ] Department of Mechanical Engineering, Shandong University, Jinan 250061, China

来源:Journal of Harbin Institute of Technology (New Series),2010,Vol.17,Issue.SUPPL. 1,37-40

资源类型:期刊论文

26. Simulation and analysis of aerodynamics for high speed face milling cutters EI SCOPUS SCIE

作者:Ji ChunHui; Liu ZhanQiang; Liu LuNing

作者机构:[Ji, C] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Liu, Z] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Liu, L] School of Mechanical Engineering, Shandong University, Jinan 250061, China

来源:中国科学(技术科学)(英文版),SCIENCE CHINA-TECHNOLOGICAL SCIENCES,2010,Vol.53,Issue.9,2575-2580

WOS被引数:2

资源类型:期刊论文

WOS:000280810100037

27. Layered structures in ceramic nozzles for improved erosion wear resistance in industrial coal-water-slurry boilers EI SCOPUS SCIE

作者:Deng Jianxin;Yun Dongling;Zhou Houmin

作者机构:[Deng, J] School of Mechanical Engineering, Shandong University, Jinan, 250061 Shandong Province, China;[ Yun, D] School of Mechanical Engineering, Shandong University, Jinan, 250061 Shandong Province, China;[ Zhou, H] School of Mechanical Engineering, Xiangtan University, Xiangtan, 411105 Hunan Province, China;[ Tan, Y] School of Mechanical Engineering, Xiangtan University, Xiangtan, 411105 Hunan Province, China

来源:CERAMICS INTERNATIONAL,CERAMICS INTERNATIONAL,2010,Vol.36,Issue.1,299-306

WOS被引数:2

资源类型:期刊论文

WOS:000273120100043

28. 头部多角度的眼睛定位与状态分析 EI CSCD SCOPUS

作者:朱淑亮;王增才;王树梁;刘盛强

作者机构:[朱淑亮] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王增才] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王树梁] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[刘盛强] 中国重型汽车集团有限公司, 济南, 山东 250002, 中国

来源:重庆大学学报. 自然科学版,Chongqing Daxue Xuebao/Journal of Chongqing University,2010,Vol.33,Issue.11,20-26

资源类型:期刊论文

29. 锯齿形切屑变形表征与其形态演化研究 EI CSCD SCOPUS

作者:苏国胜;刘战强;杜劲;杨奇彪

作者机构:[苏国胜] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[刘战强] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[杜劲] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[杨奇彪] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:农业机械学报,Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery,2010,Vol.41,Issue.11,223-227

资源类型:期刊论文

30. Finite element simulation of machining of Ti-6Al-4V alloy with thermodynamical constitutive equation EI SCOPUS SCIE

作者:Shao, Fang; Liu, Zhanqiang; Wan, Yi; Shi, Zhenyu

作者机构:[Shao, Fang; Liu, Zhanqiang; Wan, Yi; Shi, Zhenyu] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Shao, Fang] Binzhou Vacat Coll, Binzhou 256603, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2010,Vol.49,Issue.5-8,431-439

WOS被引数:16

资源类型:期刊论文

WOS:000278625400002

31. Signal frequency and parameter estimation for power systems using the hierarchical identification principle EI SCOPUS SCIE

作者:Cao, Yinni; Liu, Zhanqiang

作者机构:[Cao, Yinni; Liu, Zhanqiang] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:MATHEMATICAL AND COMPUTER MODELLING,2010,Vol.52,Issue.5-6,854-861

WOS被引数:28

资源类型:期刊论文

WOS:000279436300019

32. 硬质合金钻头钻削碳纤维增强复合材料工艺 EI SCOPUS

作者:李桂玉;李剑峰;孙杰;李卫东;

作者机构:[李桂玉;李剑峰;孙杰;李卫东]山东大学机械工程学院;[李桂玉;李剑峰;孙杰;李卫东]山东大学高效洁净机械制造教育部重点实验室;[李桂玉;李剑峰;孙杰;李卫东]中航工业集团成都飞机工业(集团)有限责任公司

来源:粉末冶金材料科学与工程,Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy,2010,Vol.15,Issue.6,580-585

资源类型:期刊论文

33. Analysis of lubrication on hybrid high speed sleeve bearing considering pressure-viscosity effect EI SCOPUS

作者:Wang, Li-Li ;Lu, Chang-Hou

作者机构:[Wang, Li-Li ;Lu, Chang-Hou ] School of Mechanical Engineering, Shandong University, Jinan 250061, China

来源:Journal of Harbin Institute of Technology (New Series),2010,Vol.17,Issue.SUPPL. 1,23-26

资源类型:期刊论文

34. Al_2O_3-TiC复合陶瓷与Q235钢扩散连接界面组织结构 EI CSCD SCOPUS

作者:黄万群;李亚江;王娟;沈孝芹

作者机构:[黄万群] 山东大学, 材料液固结构演变与加工教育部重点实验室, 济南, 山东 250061, 中国.;[李亚江] 山东大学, 材料液固结构演变与加工教育部重点实验室, 济南, 山东 250061, 中国.;[王娟] 山东大学, 材料液固结构演变与加工教育部重点实验室, 济南, 山东 250061, 中国.;[沈孝芹] 山东大学, 材料液固结构演变与加工教育部重点实验室, 济南, 山东 250061, 中国

来源:焊接学报,Hanjie Xuebao/Transactions of the China Welding Institution,2010,Vol.31,Issue.8,101-104+118

资源类型:期刊论文

35. First-principles study of bulk and (001) surface of TiC SCIE

作者:Fang Li-hong; Wang Li; Gong Jian-hong; Dai Hong-shang; Miao De-zhuang

作者机构:[Fang Li-hong; Dai Hong-shang; Miao De-zhuang] Shandong Univ, Minist Educ, Key Lab Liquid Struct & Hered Mat, Jinan 250061, Peoples R China.; [Wang Li; Gong Jian-hong] Shandong Univ Weihai, Sch Mech & Elect Engn, Weihai 264209, Peoples R China.

来源:TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA,2010,Vol.20,Issue.5,857-862

WOS被引数:15

资源类型:期刊论文

WOS:000278013300022

36. 生物质颗粒成型机的环模特性研究 EI CSCD SCOPUS

作者:申树云;董玉平

作者机构:[申树云] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[董玉平] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:太阳能学报,Taiyangneng Xuebao/Acta Energiae Solaris Sinica,2010,Vol.31,Issue.1,132-136

资源类型:期刊论文

37. Empirical models and optimal cutting parameters for cutting forces and surface roughness in hard milling of AISI H13 steel EI SCOPUS SCIE

作者:Ding, Tongchao; Zhang, Song; Wang, Yuanwei; Zhu, Xiaoli

作者机构:[Ding, Tongchao; Zhang, Song; Wang, Yuanwei; Zhu, Xiaoli] Shandong Univ, Key Lab High Efficiency & Clean Mech Mfg, Minist Educ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2010,Vol.51,Issue.1-4,45-55

WOS被引数:45

资源类型:期刊论文

WOS:000283141100005

38. 振荡流热管换热器的数值模拟及场协同分析 EI CSCD SCOPUS

作者:柴本银;邵敏;李选友;周慎杰;史勇春

作者机构:[柴本银] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[周慎杰] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[邵敏] 山东省科学院工业节能研究中心, 济南, 山东 250014, 中国.;[李选友] 山东省科学院工业节能研究中心, 济南, 山东 250014, 中国.;[史勇春] 山东省科学院工业节能研究中心, 济南, 山东 250014, 中国

来源:工程热物理学报,Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics,2010,Vol.31,Issue.4,637-640

资源类型:期刊论文

39. In situ formation of nano-scale Cu–Cu2O composites EI SCOPUS SCIE

作者:Yuying Wu;Xiangfa Liu;Junqing Zhang;Jingyu Qin;Chong Li

作者机构:[Wu, Y] Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Shandong University, No. 73, Jingshi Road, Jinan, 250061, China, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Liu, X] Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Shandong University, No. 73, Jingshi Road, Jinan, 250061, China;[ Zhang, J] Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Shandong University, No. 73, Jingshi Road, Jinan, 250061, China;[ Qin, J] Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Shandong University, No. 73, Jingshi Road, Jinan, 250061, China;[ Li, C] Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Shandong University, No. 73, Jingshi Road, Jinan, 250061, China

来源:Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2010,Vol.527,Issue.6,1544-1547

WOS被引数:5

资源类型:期刊论文

WOS:000275778900032

40. VIBRATION CHARACTERISTICS OF FLUID-STRUCTURE INTERACTION OF CONICAL SPIRAL TUBE BUNDLE EI SCOPUS SCIE

作者:Yan Ke; Ge Pei-qi; Bi Wen-bo; Su Yan-cai; Hu Rui-rong

作者机构:[Yan Ke; Ge Pei-qi; Bi Wen-bo; Su Yan-cai; Hu Rui-rong] Shandong Univ, Sch Mech Engn, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Peoples R China.

来源:JOURNAL OF HYDRODYNAMICS,2010,Vol.22,Issue.1,121-128

WOS被引数:10

资源类型:期刊论文

WOS:000277067900016

共 6 页, 103 条记录

TOP