按条件检索“81”条记录

已选条件: 数据来源: EI × 出版年: 2011 × 机构: 机械工程学院 × 文献类型: 期刊论文 ×
导出
  • 排序
  • 显示
1. Three dimensional simulation of microstructure evolution for ceramic tool materials EI SCOPUS SCIE

作者:Hao, S.;Huang, C.;Zou, B.;Wang, J.;Liu, H.;Zhu, H.

作者机构:[Hao, S] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China;[ Huang, C] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China;[ Zou, B] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China;[ Wang, J] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China;[ Liu, H] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China;[ Zhu, H] Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High-Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China

来源:Computational Materials Science,COMPUTATIONAL MATERIALS SCIENCE,2011,Vol.50,Issue.12,3334-3341

WOS被引数:5

资源类型:期刊论文

WOS:000295242100009

2. Research on product conceptual design based on case-based reasoning EI SCOPUS

作者:Li, Peigang ;Feng, Xianying ;Song, Yaqing

作者机构:[Li, Peigang ;Feng, Xianying ;Song, Yaqing ] School of Mechanical Engineering, Shandong University, Jinan, Shandong, 250061, China

来源:Journal of Convergence Information Technology,2011,Vol.6,Issue.3,173-180

资源类型:期刊论文

3. Study on the tribological properties between the aluminum alloy 7050-T7451 and the YG8 cemented carbide EI SCOPUS SCIE

作者:Li, Guiyu; Li, Jianfeng; Sun, Jie; Jiang, Feng

作者机构:[Li, Guiyu; Li, Jianfeng; Sun, Jie; Jiang, Feng] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Li, Guiyu; Li, Jianfeng; Sun, Jie; Jiang, Feng] Shandong Univ, Key Lab High Efficiency & Clean Mech Mfg, Jinan 250061, Peoples R China.

来源:JOURNAL OF MATERIALS SCIENCE,2011,Vol.46,Issue.3,723-726

资源类型:期刊论文

WOS:000286064600020

4. Cutting force modelling considering cutter deflection for sculptured surface milling EI SCOPUS

作者:Cao, Qingyuan ;Zhao, Jun ;Li, Yueen

作者机构:[Cao, Qingyuan ;Zhao, Jun ;Li, Yueen ] School of Mechanical Engineering, Shandong University, Jinan, Shandong 250061, China

来源:International Journal of Manufacturing Technology and Management,2011,Vol.22,Issue.4,362-375

资源类型:期刊论文

5. Conceptual design and analysis of the 2T1R mechanism for a cooking robot EI SCOPUS SCIE

作者:Li, Bing; Chen, Yuan; Deng, Zongquan; Xu, Wenfu

作者机构:[Deng, Zongquan] Harbin Inst Technol, Sch Mechatron Engn, Harbin 150001, Peoples R China.; [Li, Bing; Chen, Yuan; Xu, Wenfu] Harbin Inst Technol, Shenzhen Grad Sch, Shenzhen 518055, Peoples R China.; [Chen, Yuan] Shandong Univ, Sch Mech & Elect Engn, Weihai 264209, Peoples R China.

来源:ROBOTICS AND AUTONOMOUS SYSTEMS,2011,Vol.59,Issue.2,74-83

WOS被引数:3

资源类型:期刊论文

WOS:000287625400003

6. Modal analysis on fluid-structure interaction system of a large-scale gas control valve EI SCOPUS

作者:Cao, Fang ;Wang, Yong

作者机构:[Cao, Fang ] School of Mechanical Engineering, Shandong University, Jinan, Shandong, China;[Wang, Yong ] School of Mechanical Engineering, Shandong Polytechnic University, Jinan, Shandong, China

来源:Advanced Materials Research,2011,Vol.305,15-18

资源类型:期刊论文

7. Prediction of simultaneous dynamic stability limit of time-variable parameters system in thin-walled workpiece high-speed milling processes EI SCOPUS SCIE

作者:Song, Qinghua; Ai, Xing; Tang, Weixiao

作者机构:[Song, Qinghua; Ai, Xing; Tang, Weixiao] Shandong Univ, Sch Mech Engn, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250100, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2011,Vol.55,Issue.9-12,883-889

WOS被引数:41

资源类型:期刊论文

WOS:000292162300004

8. Size-dependent pull-in instability of electrostatically actuated microbeam-based MEMS EI SCOPUS SCIE

作者:Wang, Binglei; Zhou, Shenjie; Zhao, Junfeng; Chen, Xi

作者机构:[Wang, Binglei; Zhou, Shenjie; Zhao, Junfeng] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Wang, Binglei; Chen, Xi] Columbia Univ, Dept Earth & Environm Engn, New York, NY 10027 USA.; [Chen, Xi] Xi An Jiao Tong Univ, Sch Aerosp, Xian 710049, Peoples R China.; [Chen, Xi] Hanyang Univ, Dept Civil & Environm Engn, Seoul 133791, South Korea.

来源:JOURNAL OF MICROMECHANICS AND MICROENGINEERING,2011,Vol.21,Issue.2

WOS被引数:37

资源类型:期刊论文

WOS:000286630000029

9. Numerical simulation for shot-peening based on sph-coupled fem EI SCOPUS SCIE

作者:Wang, J.;Liu, F.

作者机构:[Wang, J] School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan, 250061, China;[ Liu, F] School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan, 250061, China

来源:International journal of computational methods,INTERNATIONAL JOURNAL OF COMPUTATIONAL METHODS,2011,Vol.8,Issue.4,731-745

WOS被引数:2

资源类型:期刊论文

WOS:000296781200007

10. Research of relations between microstructure and properties of biomass biodegradable materials EI SCOPUS

作者:Lv, Yu ;Jia, Xiu-Jie ;Li, Fang-Yi ;Li, Jian-Feng ;Guo, An-Fu ;Zhang, Hong

作者机构:[Lv, Yu ;Jia, Xiu-Jie ;Li, Fang-Yi ;Li, Jian-Feng ;Guo, An-Fu ] Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Ji'nan 250061, China;[Zhang, Hong ] Jiufa Biomass Degradation Project Co. Ltd., Yantai 264100, China

来源:Gongneng Cailiao/Journal of Functional Materials,2011,Vol.42,Issue.SUPPL. 5,855-858

资源类型:期刊论文

11. A novel iteration-based controller for hybrid machine systems for trajectory tracking at the end-effector level EI SCOPUS SCIE

作者:Chen, Z. H.; Wang, Y.; Ouyang, P.; Huang, J.; Zhang, W. J.

作者机构:[Chen, Z. H.; Huang, J.; Zhang, W. J.] E China Univ Sci & Technol, Coll Mech & Power Engn, Shanghai 200237, Peoples R China.; [Chen, Z. H.] Shandong Jiaotong Univ, Dept Engn Machinery, Jinan 250023, Shandong, Peoples R China.; [Wang, Y.] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Ouyang, P.] Ryerson Univ, Dept Airspace Engn, Ctr Comp & Engn, ENG170, Toronto, ON M5B 2K3, Canada.; [Huang, J.; Zhang, W. J.] Univ Saskatchewan, Dept Mech Engn, Saskatoon, SK S7N 5A9, Canada.

来源:ROBOTICA,2011,Vol.29,Issue.2,317-324

WOS被引数:6

资源类型:期刊论文

WOS:000287623500010

12. Numerical simulation for abrasive water jet machining based on ALE algorithm EI SCOPUS SCIE

作者:Gong Wenjun; Wang Jianming; Gao Na

作者机构:[Gong Wenjun; Wang Jianming; Gao Na] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2011,Vol.53,Issue.1-4,247-253

WOS被引数:9

资源类型:期刊论文

WOS:000287756500022

13. Fabrication In Situ TiB_2-TiC-Al_2O_3 Multiple Ceramic Particles Reinforced Fe-Based Composite Coatings by Gas Tungsten Arc Welding EI SCOPUS SCIE

作者:X. H. Wang;M. Zhang;B. S. Du

作者机构:[Wang, X.H] Key Laboratory of Liquid Structure and Heredity of Materials, Shandong University, Ministry of Education, Jinan 250061, China;[ Zhang, M] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Du, B.S] Key Laboratory of Liquid Structure and Heredity of Materials, Shandong University, Ministry of Education, Jinan 250061, China

来源:Tribology letters,TRIBOLOGY LETTERS,2011,Vol.41,Issue.1,171-176

WOS被引数:18

资源类型:期刊论文

WOS:000285926100019

14. 生物质冷压成型模具摩擦热分析 EI CSCD SCOPUS

作者:杜红光;董玉平;王慧;郭飞强

作者机构:[杜红光] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[董玉平] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[王慧] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[郭飞强] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:农业工程学报,Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering,2011,Vol.27,Issue.9,58-62

资源类型:期刊论文

15. Friction and wear behavior of polycrystalline diamond at temperatures up to 700 °C EI SCOPUS SCIE

作者:Deng Jianxin;Zhang Hui;Wu Ze

作者机构:[Jianxin, D] School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, Hunan Province, China, School of Mechanical Engineering, Shandong University, Jinan 250061, Shandong Province, China;[ Hui, Z] School of Mechanical Engineering, Shandong University, Jinan 250061, Shandong Province, China;[ Ze, W] School of Mechanical Engineering, Shandong University, Jinan 250061, Shandong Province, China;[ Aihua, L] School of Mechanical Engineering, Shandong University, Jinan 250061, Shandong Province, China

来源:International Journal of Refractory Metals & Hard Materials,INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS,2011,Vol.29,Issue.5,631-638

WOS被引数:22

资源类型:期刊论文

WOS:000292798200013

16. 基于复模态的空间锥螺旋管管内流固耦合振动特性的有限元分析 EI CSCD SCOPUS

作者:闫柯;葛培琪;宿艳彩

作者机构:[闫柯] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[葛培琪] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[宿艳彩] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:振动与冲击,Zhendong yu Chongji/Journal of Vibration and Shock,2011,Vol.30,Issue.1,204-207

资源类型:期刊论文

17. An edge-based smoothed finite element method for adaptive analysis EI SCOPUS SCIE

作者:Chen, L.; Zhang, J.; Zang, K. Y.; Jiao, P. G.

作者机构:[Zhang, J.] Natl Univ Singapore, Dept Civil & Environm Engn, Singapore 117576, Singapore.; [Chen, L.] Natl Univ Singapore, Ctr Adv Computat Engn Sci ACES, Singapore 117576, Singapore.; [Chen, L.] Inst High Performance Comp, Singapore 138632, Singapore.; [Zang, K. Y.] Natl Univ Singapore, Dept Mech Engn, Singapore 117576, Singapore.; [Jiao, P. G.] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:STRUCTURAL ENGINEERING AND MECHANICS,2011,Vol.39,Issue.6,767-793

资源类型:期刊论文

WOS:000294793900002

18. 压疮易患组织的血氧参量近红外光谱法监测及压力影响分析 EI CSCD SCOPUS SCIE

作者:李增勇[1];王岩[1];辛青[2];路长厚[1];李建平[1];张亮亮[1]

作者机构:[李增勇] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[王岩] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[路长厚] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[李建平] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[张亮亮] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[辛青] 山东大学校医院, 济南, 山东 250012, 中国

来源:光谱学与光谱分析,SPECTROSCOPY AND SPECTRAL ANALYSIS,2011,Vol.31,Issue.6,1490-1493

WOS被引数:2

资源类型:期刊论文

WOS:000291227800011

19. THE CASE-BASED REASONING TECHNOLOGY BASED ON FUNCTIONAL MODE EI SCOPUS

作者:PEIGANG LI;XIANYING FENG;YAQING SONG

作者机构:[Li, P] School of Mechanical Engineering, Shandong University, Jinan, Shandong, 250061, China;[ Feng, X] School of Mechanical Engineering, Shandong University, Jinan, Shandong, 250061, China;[ Song, Y] School of Mechanical Engineering, Shandong University, Jinan, Shandong, 250061, China

来源:Journal of Advanced Manufacturing Systems,Journal of Advanced Manufacturing Systems,2011,Vol.10,Issue.1,199-206

资源类型:期刊论文

20. Fusion of multi-focus images based on the 2-generation Curvelet transform EI SCOPUS

作者:Wang, Wencheng ;Chang, Faliang ;Ji, Tao ;Zhang, Guoqiang

作者机构:[Wang, Wencheng ;Ji, Tao ] School of Information and Control Engineering, Weifang University, China;[Zhang, Guoqiang ] College of Mechanical Engineering, Shandong University of Technology, China;[Wang, Wencheng ;Chang, Faliang ;Zhang, Guoqiang ] College of Control Science and Engineering, Shandong University, China

来源:International Journal of Digital Content Technology and its Applications,2011,Vol.5,Issue.1,32-42

资源类型:期刊论文

共 5 页, 81 条记录

TOP