按条件检索“137”条记录

已选条件: 数据来源: EI × 出版年: 2014 × 机构: 机械工程学院 × 文献类型: 期刊论文 ×
导出
  • 排序
  • 显示
1. Assembly variation analysis of three dimensional compliant sheet metal parts under an over-located condition EI SCOPUS

作者:Yu, Kui-Gang ;Yang, Zhi-Hong

作者机构:[Yu, Kui-Gang ;Yang, Zhi-Hong ] School of Mechanical Engineering, Shandong University, No. 17923. Jingshi Road, Jinan, China;[Yu, Kui-Gang ;Yang, Zhi-Hong ] Key Laboratory of High-efficiency and Clean Mechanical Manufacturing (Shandong University), Ministry of Education, No. 17923. Jingshi Road, Jinan, China

来源:WSEAS Transactions on Systems,2014,Vol.13,Issue.1,213-222

资源类型:期刊论文

2. Effectiveness of a Passive-active Vibration Isolation System with Actuator Constraints EI SCOPUS SCIE

作者:Sun Lingling; Sun Wei; Song Kongjie; Hansen, Colin H.

作者机构:[Sun, L] Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Jinan 250061, China, School of Mechanical Engineering, University of Adelaide, South Australia 5005, Australia;[ Sun, W] Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Jinan 250061, China;[ Song, K] Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University, Jinan 250061, China;[ Hansen, C. H] School of Mechanical Engineering, University of Adelaide, South Australia 5005, Australia

来源:中国机械工程学报,CHINESE JOURNAL OF MECHANICAL ENGINEERING,2014,Vol.27,Issue.3,567-574

WOS被引数:1

资源类型:期刊论文

WOS:000335719500017

3. The effect of sintering additives on ceramic material sintering densification process based on cellular automata model EI SCOPUS SCIE

作者:Min, Wang; Xing, Ai; Jun, Zhao

作者机构:[Min, Wang] China Univ Petr, Coll Mech & Elect Engn, Qingdao 266580, Peoples R China.; [Xing, Ai; Jun, Zhao] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:COMPUTATIONAL MATERIALS SCIENCE,2014,Vol.90,16-22

资源类型:期刊论文

WOS:000336656200003

4. Vibration characteristic analysis of the multi-drilling mechanism EI SCOPUS SCIE

作者:Cui, Xinxia; Ji, Huifu; Lin, Mingxing; Dong, Ziang

作者机构:[Cui, Xinxia; Ji, Huifu] China Univ Min & Technol, Sch Mech & Elect Engn, Xuzhou 221116, Peoples R China.; [Lin, Mingxing] Shandong Univ, Coll Mech Engn, Jinan 250061, Peoples R China.; [Dong, Ziang] Changsha Inst Min Res Co Ltd, Changsha 410000, Hunan, Peoples R China.

来源:JOURNAL OF VIBROENGINEERING,2014,Vol.16,Issue.6,2722-2734

WOS被引数:2

资源类型:期刊论文

WOS:000342905300011

5. Modeling and analysis of helical groove grinding in end mill machining EI SCOPUS SCIE

作者:Li, Guochao; Sun, Jie; Li, Jianfeng

作者机构:[Li, Guochao; Sun, Jie; Li, Jianfeng] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, MOE, Jinan 250100, Peoples R China.

来源:JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2014,Vol.214,Issue.12,3067-3076

WOS被引数:10

资源类型:期刊论文

WOS:000342245500025

6. Modeling and analysis of SMER constraints violation in IRBAC 2000 model based on colored petri nets EI SCOPUS

作者:Liu, Meng ;Wang, Xuan

作者机构:[Liu, Meng ;Wang, Xuan ] Computer Application Research Center, Harbin Institute of Technology, Shenzhen Graduate School, Shenzhen 518055, China;[Liu, Meng ] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China

来源:International Journal of Security and its Applications,2014,Vol.8,Issue.1,19-32

资源类型:期刊论文

7. Friction and Wear Behavior of WS_2/Zr Self-lubricating Soft Coatings in Dry Sliding Against 40Cr-Hardened Steel Balls EI SCOPUS SCIE

作者:Yunsong Lian;Jianxin Deng;Shipeng Li;Guangyuan Yan;Shuting Lei

作者机构:[Lian, Y] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Deng, J] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Li, S] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Yan, G] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Lei, S] Department of Industrial and Manufacturing Systems Engineering, Kansas State University, Manhattan, KS 66506, United States

来源:Tribology letters,TRIBOLOGY LETTERS,2014,Vol.53,Issue.1,237-246

WOS被引数:11

资源类型:期刊论文

WOS:000329317800023

8. 基于复合材料钻削缺陷容差值的工艺参数优化 EI SCOPUS

作者:李桂玉;汪海晋;孙杰;李剑峰;李卫东;

作者机构:[李桂玉;汪海晋;孙杰;李剑峰;李卫东]山东大学机械工程学院高效洁净机械制造教育部重点实验室;[李桂玉;汪海晋;孙杰;李剑峰;李卫东]东营职业学院石油装备与机电工程学院;[李桂玉;汪海晋;孙杰;李剑峰;李卫东]成都飞机工业(集团)有限公司

来源:复合材料学报,Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica,2014,Vol.31,Issue.4,1022-1029

资源类型:期刊论文

9. 基于CFD离散相模型的气流式皮棉清理机参数优化 EI CSCD SCOPUS

作者:董全成;冯显英

作者机构:[董全成] 山东大学, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[冯显英] 山东大学, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:农业工程学报,Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering,2014,Vol.30,Issue.2,9-16

资源类型:期刊论文

10. Size-dependent analysis of a three-layer microbeam including electromechanical coupling EI SCOPUS SCIE

作者:Li, Anqing; Zhou, Shenjie; Zhou, Shasha; Wang, Binglei

作者机构:[Li, Anqing; Zhou, Shenjie; Zhou, Shasha] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Wang, Binglei] Shandong Univ, Sch Civil Engn, Jinan 250061, Shandong, Peoples R China.

来源:COMPOSITE STRUCTURES,2014,Vol.116,Issue.1,120-127

WOS被引数:24

资源类型:期刊论文

WOS:000340300800012

11. Minimizing clearance variation in selective assembly by using a heuristic algorithm EI SCOPUS

作者:Yue, Xianying ;Wu, Zhi ;Tianze, Huang ;Julong, Yuan

作者机构:[Yue, Xianying ;Wu, Zhi ] School of Mechanical Engineering, Shandong University, China;[Tianze, Huang ;Julong, Yuan ] College of Mechanical and Vehicle Engineering, Hunan University, China

来源:Revista Tecnica de la Facultad de Ingenieria Universidad del Zulia,2014,Vol.37,Issue.1,31-41

资源类型:期刊论文

12. A new method for calculating the static performance of hydrostatic journal bearing EI SCOPUS SCIE

作者:Liang, Peng; Lu, Changhou; Pan, Wei; Li, Shiyi

作者机构:[Liang, Peng; Lu, Changhou; Pan, Wei; Li, Shiyi] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Liang, Peng; Lu, Changhou; Pan, Wei; Li, Shiyi] Shandong Univ, Key Lab High Efficiency & Clean Mech Mfg, Minist Educ, Jinan 250061, Peoples R China.

来源:TRIBOLOGY INTERNATIONAL,2014,Vol.77,72-77

WOS被引数:5

资源类型:期刊论文

WOS:000338620400009

13. Experimental investigation on the bush inner surface temperature of a high speed spiral oil wedge sleeve bearing EI SCOPUS

作者:Wang, Li-Li ;Lu, Chang-Hou

作者机构:[Wang, Li-Li ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266590, China;[Lu, Chang-Hou ] School of Mechanical Engineering, Shandong University, Jinan 250061, China

来源:Journal of Harbin Institute of Technology (New Series),2014,Vol.21,Issue.1,125-128

资源类型:期刊论文

14. An energy model on particle detachment in the turbulent field EI SCOPUS SCIE

作者:Wang, Guichao; Zhou, Shenjie; Joshi, J. B.; Jameson, Graeme J.; Evans, Geoffrey M.

作者机构:[Wang, Guichao; Zhou, Shenjie] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Wang, Guichao; Jameson, Graeme J.; Evans, Geoffrey M.] Univ Newcastle, Sch Engn, Discipline Chem Engn, Callaghan, NSW 2308, Australia.; [Joshi, J. B.] Homi Bhabha Natl Inst, Bombay 400094, Maharashtra, India.

来源:MINERALS ENGINEERING,2014,Vol.69,165-169

WOS被引数:4

资源类型:期刊论文

WOS:000345108300020

15. 低压大流量自激脉冲空化射流试验研究 EI CSCD SCOPUS

作者:陈颂英;胡涛;曲延鹏;曾兆强;李文珂;刘春武

作者机构:[陈颂英] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[胡涛] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[曲延鹏] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[曾兆强] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[李文珂] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[刘春武] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:工程热物理学报,Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics,2014,Vol.35,Issue.10,1964-1967

资源类型:期刊论文

16. Research on none uniform rational B-spline surface and agent for numerically controlled layout design EI SCOPUS

作者:Xu, Zhigang ;Li, Jingli

作者机构:[Xu, Zhigang ;Li, Jingli ] CAD Centre, School of Mechanical Eng, Shandong University, 17923# Jingshi Road, Jinan, Shandong, China

来源:Sensors and Transducers,2014,Vol.175,Issue.7,166-176

资源类型:期刊论文

17. 生物质气化尾气CO_2联合微波重整甲苯制备合成气 EI CSCD SCOPUS

作者:李龙之;宋占龙;马春元;王孚懋;田原宇

作者机构:[李龙之] 山东科技大学机械电子工程学院, 青岛, 山东 266590, 中国.;[王孚懋] 山东科技大学机械电子工程学院, 青岛, 山东 266590, 中国.;[宋占龙] 山东大学, 燃煤污染物减排国家工程实验室, 济南, 山东 250061, 中国.;[马春元] 山东大学, 燃煤污染物减排国家工程实验室, 济南, 山东 250061, 中国.;[田原宇] 山东科技大学化学与环境工程学院, 青岛, 山东 266590, 中国

来源:农业工程学报,Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering,2014,Vol.30,Issue.23,268-274

资源类型:期刊论文

18. On ultrahigh velocity micro-particle impact on steels - A multiple impact study EI SCOPUS SCIE

作者:Li, Weiyi; Wang, Jun; Zhu, Hongtao; Huang, Chuanzhen

作者机构:[Li, Weiyi; Wang, Jun] Univ New S Wales, Sch Mech & Mfg Engn, Sydney, NSW 2052, Australia.; [Zhu, Hongtao; Huang, Chuanzhen] Shandong Univ, Ctr Adv Jet Engn Technol, Sch Mech Engn, MOE Key Lab High Efficiency & Clean Mech Mfg, Jinan 250061, Peoples R China.

来源:WEAR,2014,Vol.309,Issue.1-2,52-64

WOS被引数:11

资源类型:期刊论文

WOS:000331426700007

19. A size-dependent bilayered microbeam model based on strain gradient elasticity theory EI SCOPUS SCIE

作者:Li, Anqing; Zhou, Shenjie; Zhou, Shasha; Wang, Binglei

作者机构:[Li, Anqing; Zhou, Shenjie; Zhou, Shasha] Shandong Univ, Sch Mech Engn, Jinan City 250061, Shandong, Peoples R China.; [Wang, Binglei] Shandong Univ, Sch Civil Engn, Jinan City 250061, Shandong, Peoples R China.

来源:COMPOSITE STRUCTURES,2014,Vol.108,Issue.1,259-266

WOS被引数:25

资源类型:期刊论文

WOS:000329881500025

20. Design and fabrication of TiB2/WC/h-BN micro/nano composite gradient self-lubricating ceramic materials SCOPUS EI SCOPUS

作者:Chen, Hui ;Xu, Chong-Hai ;Xiao, Guang-Chun ;Fang, Bin ;Xu, Xiu-Guo

作者机构:[Chen, Hui ;Xu, Chong-Hai ;Xiao, Guang-Chun ;Fang, Bin ;Xu, Xiu-Guo ] School of Mechanical and Automotive Engineering, Qilu University of Technology, Jinan , China;[Xu, Chong-Hai ] School of Mechanical Engineering, Shandong University, Jinan , China;[Chen, Hui ;Xu, Chong-Hai ;Xiao, Guang-Chun ;Fang, Bin ;Xu, Xiu-Guo ] Key Lab. of Adv. Mfg. and Msrmt. and Control Technol. for Light Industry in Universities of Shandong, Qilu University of Technology, Jinan, China

来源:Rengong Jingti Xuebao/Journal of Synthetic Crystals,2014,Vol.43,Issue.8,2091-2097

资源类型:期刊论文

共 7 页, 137 条记录

TOP