按条件检索“197”条记录

已选条件: 数据来源: EI × 出版年: 2017 × 机构: 机械工程学院 × 文献类型: 期刊论文 ×
导出
  • 排序
  • 显示
1. 动静压柔性铰链可倾瓦轴承的阶跃载荷动态响应 EI CSCD SCOPUS

作者:李昊;陈淑江;马金奎;路长厚

作者机构:[李昊] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[陈淑江] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[马金奎] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[路长厚] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:西安交通大学学报,Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University,2017,Vol.51,Issue.8,96-101

资源类型:期刊论文

2. 基于数值模拟的造波机设计与实现方法研究 EI CSCD SCOPUS

作者:季念迎;薛钢;刘延俊;刘梦超

作者机构:[季念迎] 山东大学机械工程学院山东拓普液压气动有限公司, 济南, 山东 250061, 中国.;[薛钢] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[刘延俊] 山东大学机械工程学院山东拓普液压气动有限公司, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[刘梦超] 山东大学海洋研究院, 济南, 山东 250100, 中国

来源:仪器仪表学报,Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument,2017,Vol.38,Issue.9,2186-2192

资源类型:期刊论文

3. 新型水轮机聚能导流结构的设计与参数优化 EI CSCD SCOPUS

作者:李龙敬;周慎杰

作者机构:[李龙敬] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[周慎杰] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:船舶力学,Chuan Bo Li Xue/Journal of Ship Mechanics,2017,Vol.21,Issue.7,832-841

资源类型:期刊论文

4. Mechanical properties of two types of Al2O3/TiC ceramic cutting tool material at room and elevated temperatures EI SCOPUS SCIE

作者:Cheng, Moli; Liu, Hanlian; Zhao, Bin; Huang, Chuanzhen; Yao, Peng; Wang, Bo

作者机构:[Cheng, Moli; Liu, Hanlian; Zhao, Bin; Huang, Chuanzhen; Yao, Peng; Wang, Bo] Shandong Univ, Sch Mech Engn, CaJET, Jinan 250061, Shandong, Peoples R China.; [Cheng, Moli; Liu, Hanlian; Zhao, Bin; Huang, Chuanzhen; Yao, Peng; Wang, Bo] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.

来源:CERAMICS INTERNATIONAL,2017,Vol.43,Issue.16,13869-13874

资源类型:期刊论文

WOS:000411299300106

5. The magnetic driver in rotating wave energy converters EI SCOPUS SCIE

作者:Zhang, Jian; Liu, Yanjun; Hee, Tongtong; Liu, Jingwen

作者机构:[Zhang, Jian; Liu, Yanjun; Liu, Jingwen] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Zhang, Jian; Liu, Yanjun; Liu, Jingwen] Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Beijing, Peoples R China.; [Liu, Yanjun; Hee, Tongtong] Shandong Univ, Inst Marine Sci & Technol, Qingdao, Shandong, Peoples R China.

来源:OCEAN ENGINEERING,2017,Vol.142,20-26

资源类型:期刊论文

WOS:000410010700003

6. ANALYSIS OF RESIDUAL STRESSES ON THE VIBRATION OF A CIRCULAR SENSOR DIAPHRAGM WITH SURFACE EFFECTS EI SCOPUS SCIE

作者:Zhou, S. -S.; Zhou, S. -J.; Li, A. -Q.; Wang, B. -L.

作者机构:[Zhou, S. -S.; Zhou, S. -J.; Li, A. -Q.] Shandong Univ, Sch Mech Engn, Jinan, Peoples R China.; [Wang, B. -L.] Shandong Univ, Sch Civil Engn, Jinan, Peoples R China.

来源:JOURNAL OF MECHANICS,2017,Vol.33,Issue.3,323-329

资源类型:期刊论文

WOS:000403196700005

7. Analysis of surface mechanical properties effects on the dynamic characteristics of a circular micro-diaphragm with a distributed mass EI SCOPUS SCIE

作者:Zhou, Shasha; Zhou, Shenjie; Wang, Binglei; Li, Anqing

作者机构:[Zhou, Shasha; Zhou, Shenjie; Li, Anqing] Shandong Univ, Sch Mech Engn, Jingshi Rd 17923, Jinan 250061, Peoples R China.; [Wang, Binglei] Shandong Univ, Sch Civil Engn, Jingshi Rd 17923, Jinan 250061, Peoples R China.

来源:APPLIED MATHEMATICAL MODELLING,2017,Vol.41,462-473

资源类型:期刊论文

WOS:000390640900028

8. New pressure control method of mixed gas in a combined cycle power plant of a steel mill EI SCOPUS SCIE

作者:Xie, Yudong; Wang, Yong

作者机构:[Xie, Yudong; Wang, Yong] Shandong Univ, Sch Mech Engn, Jingshi Rd 73, Jinan 250061, Shandong, Peoples R China.; [Xie, Yudong; Wang, Yong] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ, Jinan, Shandong, Peoples R China.

来源:ENTERPRISE INFORMATION SYSTEMS,2017,Vol.11,Issue.7,1094-1104

资源类型:期刊论文

WOS:000402310600010

9. Numerical investigation on the heat transfer enhancement mechanism of planar elastic tube bundle by flow-induced vibration EI SCOPUS SCIE

作者:Duan, Derong; Ge, Peiqi; Bi, Wenbo; Ji, Jiadong

作者机构:[Duan, Derong; Ge, Peiqi; Bi, Wenbo; Ji, Jiadong] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Ge, Peiqi] Shandong Univ, Key Lab High Efficiency & Clean Mech Mfg, Minist Educ, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF THERMAL SCIENCES,2017,Vol.112,450-459

WOS被引数:4

资源类型:期刊论文

WOS:000390078000036

10. Prediction of sawing force for single-crystal silicon carbide with fixed abrasive diamond wire saw EI SCOPUS SCIE

作者:Wang, Peizhi; Ge, Peiqi; Gao, Yufei; Bi, Wenbo

作者机构:[Wang, Peizhi; Ge, Peiqi; Gao, Yufei; Bi, Wenbo] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Ge, Peiqi; Gao, Yufei; Bi, Wenbo] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan 250061, Peoples R China.

来源:MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING,2017,Vol.63,25-32

WOS被引数:5

资源类型:期刊论文

WOS:000399631700005

11. Investigation and modelling of hybrid laser-waterjet micromachining of single crystal SiC wafers using response surface methodology EI SCOPUS SCIE

作者:Feng, Shaochuan; Huang, Chuanzhen; Wang, Jun; Zhu, Hongtao

作者机构:[Feng, Shaochuan; Huang, Chuanzhen; Zhu, Hongtao] Shandong Univ, Ctr Adv Jet Engn Technol CaJET, Key Lab High Efficiency & Clean Mech Mfg, Minist Educ,Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Feng, Shaochuan; Wang, Jun] UNSW, Sch Mech & Mfg Engn, Sydney, NSW 2052, Australia.

来源:MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING,2017,Vol.68,199-212

WOS被引数:1

资源类型:期刊论文

WOS:000406232900030

12. Effect of glass fiber surface treatment on the mechanical strength of glass fiber reinforced resin mineral composite for machine tool bed EI SCOPUS SCIE

作者:Yin, Jicai; Zhang, Jianhua; Wang, Wenqiang; Ren, Xiuhua

作者机构:[Yin, Jicai; Zhang, Jianhua; Wang, Wenqiang; Ren, Xiuhua] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ China, Jinan 250061, Shandong, Peoples R China.

来源:POLYMER COMPOSITES,2017,Vol.38,Issue.8,1559-1570

资源类型:期刊论文

WOS:000407275500007

13. Research on two methods for improving the axial static and dynamic characteristics of hydrostatic lead screws EI SCOPUS SCIE

作者:Zhang, Yongtao; Lua, Changhou; Ma, Jinkui

作者机构:[Zhang, Yongtao; Lua, Changhou; Ma, Jinkui] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Zhang, Yongtao; Lua, Changhou; Ma, Jinkui] Shandong Univ, Key Lab High Efficiency & Clean Mech Mfg, Minist Educ, Jinan 250061, Peoples R China.

来源:TRIBOLOGY INTERNATIONAL,2017,Vol.109,152-164

资源类型:期刊论文

WOS:000395611500017

14. A New Method for Human Mental Fatigue Detection with Several EEG Channels EI SCOPUS SCIE

作者:Li, Gang; Li, Bo; Wang, Guisong; Zhang, Jianhua; Wang, Jinjun

作者机构:[Li, Gang; Wang, Guisong; Zhang, Jianhua; Wang, Jinjun] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ China, Sch Mech Engn, Jinan, Peoples R China.; [Li, Bo] Duke Univ, Dept Chem, Durham, NC 27708 USA.; [Zhang, Jianhua] Shandong Univ, Sch Mech Engn, 17923 Jingshi Rd, Jinan 250061, Peoples R China.

来源:JOURNAL OF MEDICAL AND BIOLOGICAL ENGINEERING,2017,Vol.37,Issue.2,240-247

WOS被引数:1

资源类型:期刊论文

WOS:000399174500010

15. Friction characteristics of sliding guideway material considering original surface functional parameters under hydrodynamic lubrication EI SCOPUS SCIE

作者:Zhao, Bin; Zhang, Song; Li, Jianfeng; Wang, Peng

作者机构:[Zhao, Bin; Zhang, Song; Li, Jianfeng; Wang, Peng] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg, Minist Educ, 17923 Jingshi Rd, Jinan 250061, Peoples R China.

来源:PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY,2017,Vol.231,Issue.7,813-825

资源类型:期刊论文

WOS:000404157500001

16. On sustainable manufacturing of Cr-Ni alloy coatings by laser cladding and high-efficiency turning process chain and consequent corrosion resistance EI SCOPUS SCIE

作者:Zhang, Peirong; Liu, Zhanqiang

作者机构:[Zhang, Peirong; Liu, Zhanqiang] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Zhang, Peirong; Liu, Zhanqiang] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.

来源:JOURNAL OF CLEANER PRODUCTION,2017,Vol.161,676-687

WOS被引数:1

资源类型:期刊论文

WOS:000407655400057

17. Yarn break detection using an optical method in real time EI SCOPUS SCIE

作者:Wang, Qing; Huang, Ran; Lu, Changhou; Pan, Wei

作者机构:[Wang, Qing; Huang, Ran; Lu, Changhou; Pan, Wei] Shandong Univ, Sch Mech Engn, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:JOURNAL OF OPTICAL TECHNOLOGY,2017,Vol.84,Issue.5,342-345

资源类型:期刊论文

WOS:000408267400009

18. A novel technique for dressing metal-bonded diamond grinding wheel with abrasive waterjet and touch truing EI SCOPUS SCIE

作者:Zhang, Zhenzhong; Yao, Peng; Zhang, Zhiyu; Xue, Donglin; Wang, Chong; Huang, Chuanzhen; Zhu, Hongtao

作者机构:[Zhang, Zhenzhong; Yao, Peng; Wang, Chong; Huang, Chuanzhen; Zhu, Hongtao] Shandong Univ, CaJET, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ,Sch Mech Engn, Jingshi Rd 17923, Jinan 250061, Shandong, Peoples R China.; [Zhang, Zhiyu; Xue, Donglin] Chinese Acad Sci, Changchun Inst Opt Fine Mech & Phys, Key Lab Opt Syst Adv Mfg Technol, Changchun 130033, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,Vol.93,Issue.9-12,3063-3073

WOS被引数:1

资源类型:期刊论文

WOS:000416179700007

19. A theoretical model for load prediction in rolling correction process of thin-walled aeronautic parts EI SCOPUS SCIE

作者:Lu, L. X.; Sun, J.; Li, Y. L.; Li, J. F.

作者机构:[Lu, L. X.; Sun, J.; Li, Y. L.; Li, J. F.] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,Vol.92,Issue.9-12,4121-4131

资源类型:期刊论文

WOS:000411237500082

20. Structural design of groove and micro-blade of the end mill in aluminum alloys machining based on bionics EI SCOPUS SCIE

作者:Jiang, Zhenxi; Sun, Jie; Xiong, Qingchun; Wang, Liming; Li, Jianfeng

作者机构:[Jiang, Zhenxi; Sun, Jie; Wang, Liming; Li, Jianfeng] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.; [Jiang, Zhenxi; Xiong, Qingchun] CAC Chengdu Aircraft Ind Grp Co Ltd, Chengdu 610092, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,Vol.88,Issue.9-12,3343-3356

资源类型:期刊论文

WOS:000394323600082

共 10 页, 197 条记录

TOP