按条件检索“2,123”条记录

已选条件: 数据来源: EI × 机构: 机械工程学院 × 文献类型: 期刊论文 ×
导出
  • 排序
  • 显示
41. Structural Integrity Analysis of Two Over-Temperature Methanation Furnaces EI SCOPUS

作者:Zhang, Ming ;Wang, Weiqiang ;Wang, Pengfei

作者机构:[Zhang, M] School of Mechanical and Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), 3501 Daxue Road, Jinan, 250353, China;[ Wang, W] School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan, 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, 17923 Jingshi Road, Jinan, 250061, China;[ Wang, P] School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan, 250061, China, Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, 17923 Jingshi Road, Jinan, 250061, China

来源:Journal of Failure Analysis and Prevention,2019,Vol.19,Issue.1,230-236

资源类型:期刊论文

42. Comparison of wear performance of diamond tools in frame sawing with different trajectories EI SCOPUS SCIE

作者:Zhang, Heng; Zhang, Jinsheng; Wang, Shuo

作者机构:[Zhang, Heng; Zhang, Jinsheng; Wang, Shuo] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ, Jinan 250061, Shandong, Peoples R China.; [Zhang, Heng; Zhang, Jinsheng; Wang, Shuo] Res Ctr Stone Engn Shandong Prov, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS,2019,Vol.78,178-185

资源类型:期刊论文

WOS:000451489300021

43. Level set-based heterogeneous object modeling and optimization EI SCOPUS SCIE

作者:Liu, Jikai; Chen, Qian; Zheng, Yufan; Ahmad, Rafiq; Tang, Jinyuan; Ma, Yongsheng

作者机构:[Liu, Jikai] Shandong Univ, Sch Mech Engn, Ctr Adv Jet Engn Technol CaJET, Jinan, Shandong, Peoples R China.; [Liu, Jikai] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan, Shandong, Peoples R China.; [Chen, Qian] Univ Pittsburgh, Dept Mech Engn & Mat Sci, Pittsburgh, PA 15261 USA.; [Tang, Jinyuan] Cent S Univ, State Key Lab High Performance Complex Mfg, Changsha, Hunan, Peoples R China.; [Zheng, Yufan; Ahmad, Rafiq; Ma, Yongsheng] Univ Alberta, Dept Mech Engn, Edmonton, AB, Canada.

来源:COMPUTER-AIDED DESIGN,2019,Vol.110,50-68

资源类型:期刊论文

WOS:000461264400005

44. A helical interpolation precision truing and error compensation for arc-shaped diamond grinding wheel EI SCOPUS SCIE

作者:Zhu, Jiahao; Yao, Peng; Wang, Wei; Huang, Chuanzhen; Zhu, Hongtao; Zou, Bin; Liu, Hanlian

作者机构:[Zhu, Jiahao; Yao, Peng; Huang, Chuanzhen; Zhu, Hongtao; Zou, Bin; Liu, Hanlian] Shandong Univ, Sch Mech Engn, Ctr Adv Jet Engn Technol CaJET, Jinan 250061, Shandong, Peoples R China.; [Zhu, Jiahao; Yao, Peng; Huang, Chuanzhen; Zhu, Hongtao; Zou, Bin; Liu, Hanlian] Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.; [Wang, Wei] China Univ Petr East China, Coll Mechan & Elect Engn, Qingdao 266580, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.100,Issue.1-4,167-177

资源类型:期刊论文

WOS:000455946000015

45. A comparison of TIG-MIG hybrid welding with conventional MIG welding in the behaviors of arc, droplet and weld pool EI SCOPUS SCIE

作者:Zong, Ran; Chen, Ji; Wu, Chuansong

作者机构:[Zong, Ran] Shandong Univ Technol, Sch Mech Engn, 266 Xincun Rd, Zibo 255000, Peoples R China.; [Chen, Ji; Wu, Chuansong] Shandong Univ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Shandong, Peoples R China.

来源:JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2019,Vol.270,345-355

资源类型:期刊论文

WOS:000468712800031

46. Characteristics of machined surface integrity in face milling Al-Li alloy 2A97 with carbide inserts EI SCOPUS SCIE

作者:Niu, Jintao; Liu, Zhanqiang; Ai, Xing; Huang, Weimin; Wang, Guijie; Duan, Ran

作者机构:[Niu, Jintao; Liu, Zhanqiang; Ai, Xing; Huang, Weimin; Wang, Guijie; Duan, Ran] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg MOE, Jinan 250061, Shandong, Peoples R China.; [Niu, Jintao; Liu, Zhanqiang; Ai, Xing; Huang, Weimin; Wang, Guijie; Duan, Ran] Shandong Univ, Key Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.101,Issue.1-4,839-848

资源类型:期刊论文

WOS:000461051300059

47. Multi-sensors based condition monitoring of rotary machines: An approach of multidimensional time-series analysis EI SCOPUS SCIE

作者:Wang, Teng; Lu, Guoliang; Yan, Peng

作者机构:[Wang, Teng; Lu, Guoliang; Yan, Peng] Shandong Univ, Sch Mech Engn, Natl Demonstrat Ctr Expt Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:MEASUREMENT,2019,Vol.134,326-335

资源类型:期刊论文

WOS:000468223900029

48. Robust fixture design of compliant assembly process based on a support vector regression model EI SCOPUS SCIE

作者:Yu, Kuigang

作者机构:[Yu, Kuigang] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Yu, Kuigang] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.; [Yu, Kuigang] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,Vol.103,Issue.1-4,111-126

资源类型:期刊论文

WOS:000475921300010

49. Dynamic response of ceramic material subjected to impact of hard particle EI SCOPUS SCIE

作者:Lv, Zhe; Hou, Rongguo; Tian, Yebing; Huang, Chuanzhen; Zhu, Hongtao; Wang, Jun

作者机构:[Lv, Zhe; Hou, Rongguo; Tian, Yebing] Shandong Univ Technol, Sch Mech Engn, Zibo 255000, Peoples R China.; [Huang, Chuanzhen; Zhu, Hongtao] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Ctr Adv Jet Engn Technol CaJET,Minist Educ, Jinan 250061, Shandong, Peoples R China.; [Wang, Jun] Univ New South Wales, Sch Mech & Mfg Engn, Sydney, NSW 2052, Australia.

来源:MATERIALS RESEARCH EXPRESS,2019,Vol.6,Issue.4

资源类型:期刊论文

WOS:000455869400002

50. Preparation and degradation property of magnetic FePBCSi amorphous alloy powder EI SCOPUS SCIE

作者:Li, Xuelian; Wu, Yuying; Yang, Songtao; Cha, Xingjian; Shao, Pengcheng; Wang, Li

作者机构:[Li, Xuelian; Wu, Yuying; Yang, Songtao; Cha, Xingjian; Shao, Pengcheng; Wang, Li] Shandong Univ Weihai, Sch Mech & Elect Engn, Wenhuaxi Rd 180, Weihai 264209, Peoples R China.

来源:JOURNAL OF NON-CRYSTALLINE SOLIDS,2019,Vol.503,284-287

资源类型:期刊论文

WOS:000454381100039

51. 多应变速率下尺寸效应对黄铜微尺度塑性变形本构及损伤演化的影响 EI CSCD SCOPUS

作者:冉家琪;徐力;王继来;龚峰

作者机构:[]深圳大学机电与控制工程学院,深圳518060,中国.;[]山东大学机械工程学院,济南250100,中国.;[]山东大学深圳研究院,深圳518057,中国

来源:机械工程学报,Jixie Gongcheng Xuebao/Journal of Mechanical Engineering,2019,Vol.55,Issue.16,69-76

资源类型:期刊论文

52. Influence of tool material and geometry on micro-textured surface in radial ultrasonic vibration-assisted turning EI SCOPUS SCIE

作者:Liu, Xianfu; Zhang, Jianhua; Hu, Xiangyi; Wu, Debao

作者机构:[Liu, Xianfu; Zhang, Jianhua; Hu, Xiangyi; Wu, Debao] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ China, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Liu, Xianfu; Zhang, Jianhua; Hu, Xiangyi; Wu, Debao] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2019,Vol.152,545-557

资源类型:期刊论文

WOS:000459837400041

53. Robust passive underwater acoustic detection method for propeller EI SCOPUS SCIE

作者:Song, Yongxing; Liu, Jingting; Cao, Linlin; Chu, Ning; Wu, Dazhuan

作者机构:[Song, Yongxing; Cao, Linlin; Chu, Ning; Wu, Dazhuan] Zhejiang Univ, Inst Proc Equipment, Coll Energy Engn, Hangzhou 310027, Zhejiang, Peoples R China.; [Liu, Jingting] Shandong Univ, Sch Mech Engn, Natl Demonstrat Ctr Expt Mech Engn Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.; [Wu, Dazhuan] Zhejiang Univ, State Key Lab Fluid Power & Mechatron Syst, Hangzhou 310027, Zhejiang, Peoples R China.

来源:APPLIED ACOUSTICS,2019,Vol.148,151-161

资源类型:期刊论文

WOS:000460842800018

54. Simulation and optimization of overlapped iteration process with multi-coupled activities based on value analysis EI SCOPUS SCIE

作者:Yin, Fupeng; Gao, Qi; Ji, Xue

作者机构:[Yin, Fupeng; Gao, Qi; Ji, Xue] Shandong Univ, Sch Mech Engn, Jinan, Shandong, Peoples R China.; [Yin, Fupeng; Ji, Xue] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan, Shandong, Peoples R China.

来源:CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS,2019,Vol.27,Issue.1,57-67

资源类型:期刊论文

WOS:000461561100005

55. Modifying tribological performances of AISI 316 stainless steel surfaces by laser surface texturing and various solid lubricants EI SCOPUS SCIE

作者:Meng, Rong; Deng, Jianxin; Duan, Ran; Liu, Yayun; Zhang, Guiliang

作者机构:[Meng, Rong; Deng, Jianxin; Duan, Ran; Liu, Yayun; Zhang, Guiliang] Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, MOE, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:OPTICS AND LASER TECHNOLOGY,2019,Vol.109,401-411

资源类型:期刊论文

WOS:000446949600051

56. 基于公理设计和多色集合的拆卸设备方案设计 EI CSCD SCOPUS

作者:杨得玉; 徐志刚; 朱建峰; 苏开远; 朱卓悦

作者机构:[杨得玉]山东大学机械工程学院, 济南, 山东 250061, 中国;[徐志刚]山东大学机械工程学院, 济南, 山东 250061, 中国;[朱建峰]山东大学机械工程学院, 济南, 山东 250061, 中国;[苏开远]山东大学机械工程学院, 济南, 山东 250061, 中国;[朱卓悦]山东大学深圳研究院, 深圳, 广东 518057, 中国.

来源:计算机集成制造系统,Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS,2019,Vol.25,Issue.10,2476-2486

资源类型:期刊论文

57. 基于逆向拟合法的H13钢J-C本构修正模型 EI CSCD SCOPUS

作者:张静; 张松; 李斌训

作者机构:[张静]山东大学机械工程学院;;山东大学机械工程国家级实验教学示范中心, 高效洁净机械制造教育部重点实验室;;, 济南;;济南, 山东;;山东 250061;;250061, 中国;[张松]山东大学机械工程学院;;山东大学机械工程国家级实验教学示范中心, 高效洁净机械制造教育部重点实验室;;, 济南;;济南, 山东;;山东 250061;;250061, 中国;[李斌训]山东大学机械工程学院;;山东大学机械工程国家级实验教学示范中心, 高效洁净机械制造教育部重点实验室;;, 济南;;济南, 山东;;山东 250061;;250061, 中国.

来源:中南大学学报. 自然科学版,Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology),2019,Vol.50,Issue.8,1808-1815

资源类型:期刊论文

58. Semi-active control of ambulance stretcher system based on parallel mechanism with MR dampers and perturbation analysis EI SCOPUS SCIE

作者:Gao, Xiang; Niu, Junchuan; Liu, Zhihui; Tian, Jinxin

作者机构:[Gao, Xiang; Niu, Junchuan; Liu, Zhihui; Tian, Jinxin] Shandong Univ, Sch Mech Engn, Jingshi Rd 17923, Jinan 250061, Shandong, Peoples R China.; [Niu, Junchuan] Shandong Univ, Minist Educ, Key Lab Highefficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN,2019,Vol.15,Issue.4,817-831

资源类型:期刊论文

WOS:000494635300011

59. A new closed-form calculation of envelope surface for modeling face gears EI SCOPUS SCIE

作者:Zhou, Yuansheng; Wu, Yuanhang; Wang, Liming; Tang, Jinyuan; Ouyang, Hongwu

作者机构:[Zhou, Yuansheng; Wu, Yuanhang; Tang, Jinyuan; Ouyang, Hongwu] Cent S Univ, State Key Lab High Performance Complex Mfg, Changsha 410083, Hunan, Peoples R China.; [Zhou, Yuansheng; Wu, Yuanhang; Tang, Jinyuan; Ouyang, Hongwu] Cent S Univ, Coll Mech & Elect Engn, Changsha 410083, Hunan, Peoples R China.; [Wang, Liming] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ, Jinan 250061, Shandong, Peoples R China.

来源:MECHANISM AND MACHINE THEORY,2019,Vol.137,211-226

资源类型:期刊论文

WOS:000463885300012

60. Increasing the Utilization of Transmission Lines Capacity by Quasi-Dynamic Thermal Ratings EI SCOPUS SCIE

作者:Song, Fan; Wang, Yanling; Yan, Hongbo; Zhou, Xiaofeng; Niu, Zhiqiang

作者机构:[Song, Fan; Wang, Yanling; Yan, Hongbo] Shandong Univ Weihai, Sch Mech Elect & Informat Engn, Weihai 264209, Peoples R China.; [Zhou, Xiaofeng] Weihai Vocat Coll, Dept Mech Elect Engn, Weihai 264210, Peoples R China.; [Niu, Zhiqiang] State Grid Weihai Power Supply Co, Weihai 264200, Peoples R China.

来源:ENERGIES,2019,Vol.12,Issue.5

资源类型:期刊论文

WOS:000462646700025

共 107 页, 2,123 条记录

TOP