按条件检索“50”条记录

已选条件: 数据来源: EI × 出版年: 2011 × 机构: 机械工程学院 × 文献类型: conferencearticleca ×
导出
  • 排序
  • 显示
1. In situ synthesis process for TiC whisker toughening Al2O 3-based ceramic cutting tool composite EI

作者:Liu, Bingqiang ;Wang, Changchun ;Sun, Ailing ;Huang, Chuanzhen

作者机构:[Liu, Bingqiang ;Wang, Changchun ;Sun, Ailing ] Center for Advanced Ceramic Cutting Tools and Application Technologies (CaCCTAT), School of Mechanical and Electrical Engineering, Weifang University, Weifang 261061, China;[Liu, Bingqiang ;Huang, Chuanzhen ] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China

会议名称:2011 International Conference on Advanced Engineering Materials and Technology, AEMT 2011

会议日期:July 29, 2011 - July 31, 2011

来源:Advanced Materials Research,2011,Vol.295-297,949-953

资源类型:会议论文

2. Simulation research of permanent magnet synchronous motor based on bp neural network PID controller EI

作者:Ji, Hua ;Li, Zhiyong

作者机构:[Ji, Hua ] Department of Electrical and Electronic Engineering, Shandong University of Technology, Zibo, Shandong, China;[Li, Zhiyong ] Department of Mechanical Engineering, Shandong University of Technology, Zibo, Shandong, China

会议名称:2011 2nd ETP/IITA Conference on Telecommunication and Information, TEIN 2011

会议日期:April 3, 2011 - April 4, 2011

来源:TEIN 2011 - 2011 2nd ETP/IITA Conference on Telecommunication and Information,2011,Vol.2,144-148

资源类型:会议论文

3. Performance research of increasing-friction herringbone driving roller based on finite element analysis EI

作者:Sui, Xiu-Hua ;Wang, Shao-Bo ;Miao, De-Jun

作者机构:[Sui, Xiu-Hua ;Wang, Shao-Bo ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, China;[Miao, De-Jun ] Key Laboratory of Mine Hazard Prevention and Control of China Ministry of Education, Shandong University of Science and Technology, Qingdao, China

会议名称:2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011

会议日期:July 15, 2011 - July 17, 2011

来源:2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings,2011511-513

资源类型:会议论文

4. Performance analysis of CO2 capture system by MEA method based on solar assisted heat pump technology EI

作者:Yang, Qian Ming ;Luo, Yong Guo

作者机构:[Yang, Qian Ming ;Luo, Yong Guo ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, No.579, Qianwangang Road, Qingdao, Shandong, 266510, China

会议名称:2011 International Conference on Chemical Engineering and Advanced Materials, CEAM 2011

会议日期:May 28, 2011 - May 30, 2011

来源:Advanced Materials Research,2011,Vol.236-238,518-522

资源类型:会议论文

5. Real-time identification of material parameters for quadrangle parts intelligent bending EI

作者:Su, Chunjian ;Li, Quanlan ;Guo, Sumin ;Zhang, Guangheng ;Ma, Rui

作者机构:[Su, Chunjian ;Li, Quanlan ;Guo, Sumin ;Zhang, Guangheng ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266510, China;[Ma, Rui ] College of Mechanical Engineering, Yan Shan University, Qinhuangdao 066004, China

来源:Proceedings of the 30th Chinese Control Conference, CCC 2011,20112653-2656

资源类型:会议论文

6. Cutting performance of cemented carbide-based self-lubricating tool embedded with CaF2 solid lubricants EI

作者:Song, Wenlong ;Zhang, Liyin ;Xu, Changzhong ;Li, Xuanqiu ;Yan, Jianfeng ;Deng, Jianxin ;Zhang, Liang

作者机构:[Song, Wenlong ;Zhang, Liyin ;Xu, Changzhong ;Li, Xuanqiu ;Yan, Jianfeng ;Zhang, Liang ] Shantui Construction Machinery Co., Ltd., Jining 272073, China;[Deng, Jianxin ] Department of Mechanical Engineering, Shandong University, Jinan 250061, China

会议名称:2011 International Conference on Advanced Engineering Materials and Technology, AEMT 2011

会议日期:July 29, 2011 - July 31, 2011

来源:Advanced Materials Research,2011,Vol.291-294,3083-3087

资源类型:会议论文

7. Dynamic analysis of rotor system for magnetic levitation high-speed electrical machine EI

作者:Ding, Hongchang ;Xiao, Linjing ;Zhang, Huayu ;Yang, Qianming

作者机构:[Ding, Hongchang ;Xiao, Linjing ;Zhang, Huayu ;Yang, Qianming ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, China

来源:2011 International Conference on Electric Information and Control Engineering, ICEICE 2011 - Proceedings,20112129-2132

资源类型:会议论文

8. Research on generating interference-free tool path based on triangular Bézier Surface EI

作者:Kang, Xin Cai ;Sun, Dian Zhu ;Shi, Yang ;Sun, Yong Wei

作者机构:[Kang, Xin Cai ] Shandong Provincial Key Laboratory of Precision Manufacturing and Non-Traditional Machining, Shandong University of Technology, No.12, Zi Bo Zhang Dian Zhou Road, Zi Bo, 255091, China;[Sun, Dian Zhu ;Shi, Yang ;Sun, Yong Wei ] School of Mechanical Engineering, Shandong University of Technology, No.12, Zibo Zhang Dian Zhou Road, Zibo, 255049, China

会议名称:2nd International Conference on Manufacturing Science and Engineering, ICMSE 2011

会议日期:April 9, 2011 - April 11, 2011

来源:Advanced Materials Research,2011,Vol.201-203,799-804

资源类型:会议论文

9. Research on preparation of Ca3-xLa xCo4O9thermoelectric material by microwave heating EI

作者:Mu, Jiechen ;Zhang, Lipeng

作者机构:[Mu, Jiechen ] School of Mechanical Engineering, Shandong University of Technology, SDUT, Zibo, China;[Zhang, Lipeng ] School of Chemical Engineering, Shandong University of Technology, SDUT, Zibo, China

来源:2011 International Conference on Remote Sensing, Environment and Transportation Engineering, RSETE 2011 - Proceedings,20117064-7067

资源类型:会议论文

10. Driving manner and design method on elbow joint of a artificial limb EI

作者:Gaozuo, Sun ;Binghui, Fan ;Chengzhi, Yuan ;Baojun, Liu ;Feng, Min

作者机构:[Gaozuo, Sun ] College of Mechanical and Electronic Engineering, Shandong Key Laboratory of Robotics and Intelligent Technology, Shandong University of Science and Technology, Qingdao, China;[Binghui, Fan ;Chengzhi, Yuan ;Baojun, Liu ;Feng, Min ] Shandong Key Laboratory of Robotics and Intelligent Technology, Research Center of Robotics, Shandong University of Science and Technology, Qingdao, China

来源:2011 International Conference on Consumer Electronics, Communications and Networks, CECNet 2011 - Proceedings,2011293-296

资源类型:会议论文

11. Study on hydraulic circuit simulation based on MSC·EASY5 for the arm of excavator EI

作者:Wan, Lirong ;Gong, Yunqing ;Wang, Chenglong

作者机构:[Wan, Lirong ;Gong, Yunqing ;Wang, Chenglong ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, 266510, China

会议名称:2011 International Conference on Advanced Engineering Materials and Technology, AEMT 2011

会议日期:July 29, 2011 - July 31, 2011

来源:Advanced Materials Research,2011,Vol.291-294,2281-2286

资源类型:会议论文

12. Optimum design of a 3-RRR planar parallel manipulator with a singularity-free workspace EI

作者:Gao, Mingwang ;Zhang, Xianmin ;Wu, Zhiwei

作者机构:[Gao, Mingwang ;Zhang, Xianmin ;Wu, Zhiwei ] School of Mechanical Engineering, South China University of Technology, China;[Gao, Mingwang ] School of Mechanical Engineering, Shandong University of Technology, China

会议名称:International Conference on Power Transmission, ICPT 2011

会议日期:October 25, 2011 - October 29, 2011

来源:Applied Mechanics and Materials,2011,Vol.86,606-610

资源类型:会议论文

13. Numerical simulation of dispersed phase flow in a tube considering bubbles erosion and Cl- ions concentration effects EI

作者:Chen, Songying ;Mao, Junjie ;Wang, Weiqiang

作者机构:[Chen, Songying ;Mao, Junjie ;Wang, Weiqiang ] School of Mechanical Engineering, Shandong University, Jinan, Shandong, 250061, China

会议名称:2011 International Conference on Advanced Design and Manufacturing Engineering, ADME 2011

会议日期:September 16, 2011 - September 18, 2011

来源:Advanced Materials Research,2011,Vol.314-316,1069-1074

资源类型:会议论文

14. Partial rescheduling for permutation flow-shop scheduling subject to a machine breakdown EI

作者:Wang, Bing ;Wang, Xiaoming

作者机构:[Wang, Bing ] School of Mechatronics Engineering and Automation, Shanghai University, Shanghai, China;[Wang, Xiaoming ] School of Mechanical, Electrical and Information Engineering, Shandong University at Weihai, Weihai, China

来源:ASCC 2011 - 8th Asian Control Conference - Final Program and Proceedings,20111042-1047

资源类型:会议论文

15. Study on hydraulic system design of mine bucket EI

作者:Huang, Dejie ;Cao, Lianmin

作者机构:[Huang, Dejie ] Logistics Company of Taian Campus, Shandong University of Science and Technology, Taian, China;[Cao, Lianmin ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, China

会议名称:2011 International Conference on Fluid Power and Mechatronics, FPM 2011

会议日期:August 17, 2011 - August 20, 2011

来源:Proceedings of 2011 International Conference on Fluid Power and Mechatronics, FPM 2011,20111002-1005

资源类型:会议论文

16. Simulation of fabrication for single-phase Al2O3 ceramic tool materials at different fabrication temperature EI

作者:Fang, Bin ;Huang, Chuanzhen ;Xu, Chonghai ;Sun, Sheng

作者机构:[Fang, Bin ;Huang, Chuanzhen ] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061, China;[Sun, Sheng ] School of Material Science and Engineering, Shandong University, Jinan 250061, China;[Fang, Bin ;Xu, Chonghai ] School of Mechanical Engineering, Shandong Institute of Light Industry, Jinan 250100, China

会议名称:2010 International Conference on Advances in Materials and Manufacturing Processes, ICAMMP 2010

会议日期:November 6, 2010 - November 8, 2010

来源:Advanced Materials Research,2011,Vol.150-151,1358-1363

资源类型:会议论文

17. A 32-site 3-D CMOS electronic interfaces to the nervous system EI

作者:Li, Hong-Yu ;Wang, Di ;Li, Xing-Fei ;Wu, Teng-Fei

作者机构:[Li, Hong-Yu ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, China;[Wang, Di ;Li, Xing-Fei ;Wu, Teng-Fei ] College of Precision Instrument and Opto-electronics Engineering, Tianjin University, Tianjin, China;[Li, Hong-Yu ] State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin, China

会议名称:2011 International Conference on Fluid Power and Mechatronics, FPM 2011

会议日期:August 17, 2011 - August 20, 2011

来源:Proceedings of 2011 International Conference on Fluid Power and Mechatronics, FPM 2011,2011822-827

资源类型:会议论文

18. The manufacturing method of diamond dressing gears for the dressing of gear grinding worms EI

作者:Yu, Tao ;Wang, Su-Yu ;Fan, Yun-Xiao

作者机构:[Yu, Tao ;Wang, Su-Yu ;Fan, Yun-Xiao ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, China

会议名称:2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011

会议日期:August 12, 2011 - August 14, 2011

来源:Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011,2011,Vol.6,2822-2824

资源类型:会议论文

19. Effect of hot pressing technology on the microstructure and mechanical properties of ZrO2nano-composite ceramic tool and die material EI

作者:Yi, Mingdong ;Xu, Chonghai ;Zhang, Jingjie ;Jiang, Zhenyu

作者机构:[Yi, Mingdong ] School of Material Science and Engineering, Shandong Institute of Light Industry, Jinan, 250353, China;[Xu, Chonghai ] School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[Xu, Chonghai ;Zhang, Jingjie ;Jiang, Zhenyu ] School of Mechanical Engineering, Shandong Institute of Light Industry, Jinan, 250353, China

来源:Materials Science Forum,2011,Vol.686,396-400

资源类型:会议论文

20. Research on properties of Al2O3-based cermets inert anode EI

作者:Mu, Jie Chen ;Zhang, Li Peng

作者机构:[Mu, Jie Chen ] School of Mechanical Engineering, Shandong University of Technology, No.12, Zhangzhou Road, Zhangdian District, Zi Bo, 255049, China;[Zhang, Li Peng ] Wan Jie Group Co. Ltd., Bashan Boshan Zibo, Zi Bo, 255213, China

会议名称:2nd International Conference on Manufacturing Science and Engineering, ICMSE 2011

会议日期:April 9, 2011 - April 11, 2011

来源:Advanced Materials Research,2011,Vol.189-193,4377-4382

资源类型:会议论文

共 3 页, 50 条记录

TOP