按条件检索“552”条记录

已选条件: 出版年: 2013 × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
1. 闭式液压系统油温分析及补油量确定 EI SCOPUS

作者:刘文平;王林涛;姜兆亮;

作者机构:[刘文平]山东大学机械工程学院;[王林涛]山东大学高效洁净机械制造教育部重点实验室;[姜兆亮]浙江大学机械工程学系

来源:中南大学学报(自然科学版),Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology),2013,Vol.44,Issue.9,3658-3664

资源类型:期刊论文

2. KDP晶体金刚石线锯切割表面缺陷分析 EI CSCD SCOPUS

作者:高玉飞;葛培琪;毕文波;毕玉超

作者机构:[高玉飞] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[毕文波] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[毕玉超] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[葛培琪] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:人工晶体学报,Rengong Jingti Xuebao/Journal of Synthetic Crystals,2013,Vol.42,Issue.7,1278-1282

资源类型:期刊论文

3. 基于ADAMS的四足机器人上下坡运动仿真

作者:马宗利;王建明;李华;赵彦;刘延俊;

作者机构:[马宗利;王建明;李华;赵彦;刘延俊]山东大学机械学院

来源:机床与液压,Machine Tool & Hydraulics,2013,Issue.04,122-123+126

资源类型:期刊论文

4. 四足机器人walk步态仿真

作者:马宗利;王建明;李华;赵彦;

作者机构:[马宗利;王建明;李华;赵彦]山东大学机械学院

来源:机床与液压,2013,Issue.11,146-148+190

资源类型:期刊论文

5. Three-point bending fatigue behavior of WC-Co cemented carbides EI SCOPUS SCIE

作者:Li, Anhai; Zhao, Jun; Wang, Dong; Gao, Xinliang; Tang, Hongwei

作者机构:[Li, Anhai; Zhao, Jun; Wang, Dong] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Peoples R China.; [Gao, Xinliang] Shengjing Sci & Technol Ind Zone Zhangqiu City, Jinan Inst Met Sci, Jinan 250220, Peoples R China.; [Tang, Hongwei] Shandong Univ, Sch Civil Engn, Jinan 250061, Peoples R China.

来源:MATERIALS & DESIGN,2013,Vol.45,271-278

WOS被引数:24

资源类型:期刊论文

WOS:000312856800036

6. Performance analysis of a direct expansion solar assisted heat pump water heater in cold area EI

作者:Zhang, Dong ;Wang, Chunlong ;Zhou, Xiaodong ;Kong, Xiangqiang

作者机构:[Zhang, Dong ;Wang, Chunlong ;Zhou, Xiaodong ] Research Center of Solar Energy and Gas Hydrate, Lanzhou University of Technology, Lanzhou 730050, China;[Kong, Xiangqiang ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266510, China

来源:Taiyangneng Xuebao/Acta Energiae Solaris Sinica,2013,Vol.34,Issue.12,2121-2127

资源类型:期刊论文

7. Mining unusual and rare stellar spectra from large spectroscopic survey data sets using the outlier-detection method SCOPUS SCIE

作者:Wei, P.;Luo, A.;Li, Y.;Pan, J.;Tu, L.;Jiang, B.;Kong, X.;Shi, Z.;Yi, Z.;Wang, F.;Liu, J.;Zhao, Y.

作者机构:[Wei, P] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China, University of Chinese Academy of Sciences, Beijing 100049, China;[ Luo, A] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China, School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China;[ Li, Y] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China;[ Pan, J] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China;[ Tu, L] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China, School of Science, Liaoning University of Science and Technology, Anshan 144051, China;[ Jiang, B] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China, University of Chinese Academy of Sciences, Beijing 100049, China, School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China;[ Kong, X] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China;[ Shi, Z] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China, University of Chinese Academy of Sciences, Beijing 100049, China, Institute of Automation, Chinese Academy of Sciences, Beijing 100190, China;[ Yi, Z] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China, University of Chinese Academy of Sciences, Beijing 100049, China, School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China;[ Wang, F] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China, University of Chinese Academy of Sciences, Beijing 100049, China;[ Liu, J] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China;[ Zhao, Y] Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012, China

来源:Monthly notices of the Royal Astronomical Society,MONTHLY NOTICES OF THE ROYAL ASTRONOMICAL SOCIETY,2013,Vol.431,Issue.2,1800-1811

WOS被引数:15

资源类型:期刊论文

WOS:000318345200062

8. 石材行业清洁生产技术概述(一)——清洁生产技术与清洁生产实施战略

作者:白硕玮;王志;张进生;刘召龙;黄波;

作者机构:[白硕玮;王志;张进生;刘召龙;黄波]山东大学机械工程学院

来源:石材,2013,Issue.08,1-4

资源类型:期刊论文

9. KDP晶体锯切应力场与初始内应力场的耦合分析 EI CSCD SCOPUS

作者:焦扬;葛培琪;高玉飞;毕文波

作者机构:[焦扬] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[高玉飞] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[毕文波] 山东大学机械工程学院, 济南, 山东 250061, 中国.;[葛培琪] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:人工晶体学报,Rengong Jingti Xuebao/Journal of Synthetic Crystals,2013,Vol.42,Issue.8,1504-1508

资源类型:期刊论文

10. An approach to scientific workflow slicing EI SCOPUS

作者:Yang, Mengmeng ;Cheng, Jie ;Xu, Wei

作者机构:[Yang, Mengmeng ;Cheng, Jie ;Xu, Wei ] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, 264209, Shandong, China

来源:Information Technology Journal,2013,Vol.12,Issue.15,3424-3429

资源类型:期刊论文

11. Community detection algorithms using modularity on function call network of software EI SCOPUS

作者:Guo, Yang ;Zhao, Zhengxu

作者机构:[Guo, Yang ] School of Mechanical Engineering, Shandong University, Jinan 250061, Shandong, China;[Zhao, Zhengxu ] School of Information Science and Technology, Shijiazhuang Tiedao University, Shijiazhuang 050043, Hebei, China

来源:International Journal of Applied Mathematics and Statistics,2013,Vol.43,Issue.13,248-254

资源类型:期刊论文

12. Optimization of two-stage cylindrical gear reducer with adaptive boundary constraints EI

作者:Li, Xueyi ;Jiang, Shoubo ;Zeng, Qingliang

作者机构:[Li, Xueyi ;Jiang, Shoubo ;Zeng, Qingliang ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, China

来源:Journal of Software,2013,Vol.8,Issue.8,2052-2057

资源类型:期刊论文

13. MICRO-STRUCTURES OF HARD COATINGS DEPOSITED ON TITANIUM ALLOYS BY LASER ALLOYING TECHNIQUE EI SCOPUS SCIE

作者:Li Wei; Yu Huijun; Chen Chuanzhong; Wang Diangang; Weng Fei

作者机构:[Li Wei; Chen Chuanzhong; Wang Diangang; Weng Fei] Shandong Univ, Sch Mat Sci & Engn, Minist Educ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Jinan 250061, Peoples R China.; [Yu Huijun] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

来源:SURFACE REVIEW AND LETTERS,2013,Vol.20,Issue.1

资源类型:期刊论文

WOS:000316945500008

14. Effects of geometric structure of twist drill bits and cutting condition on tool life in drilling 42CrMo ultrahigh-strength steel EI SCOPUS SCIE

作者:Wang, Xiangyu; Huang, Chuanzhen; Zou, Bin; Liu, Hanlian; Wang, Jun

作者机构:[Wang, Xiangyu; Huang, Chuanzhen; Zou, Bin; Liu, Hanlian; Wang, Jun] Shandong Univ, Sch Mech Engn, Ctr Adv Jet Engn Technol CaJET, Jinan 250061, Peoples R China.; [Wang, Xiangyu; Huang, Chuanzhen; Zou, Bin; Liu, Hanlian; Wang, Jun] Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan 250061, Peoples R China.

来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2013,Vol.64,Issue.1-4,41-47

WOS被引数:5

资源类型:期刊论文

WOS:000313410500004

15. A robust and efficient clustering algorithm for network MIMO system EI SCOPUS

作者:Cui, Wentao ;Niu, Kai ;Wan, Qian ;Wu, Weiling

作者机构:[Cui, Wentao ;Niu, Kai ;Wan, Qian ;Wu, Weiling ] Key Laboratory of Universal Wireless Communication, Ministry of Education, Beijing University of Posts and Telecommunications, Beijing 100876, China;[Cui, Wentao ] School of Mechanical, Electrical and Information Engineering, Shandong University at Weihai, Weihai 264209, China

来源:Journal of Computers (Finland),2013,Vol.8,Issue.11,2750-2755

资源类型:期刊论文

16. Study on in-situ synthesis of ZrB2 whiskers in ZrB2-ZrC matrix powder for ceramic cutting tools SCOPUS SCIE

作者:Xu, Liang; Huang, Chuanzhen; Liu, Hanlian; Zou, Bin; Zhu, Hongtao; Zhao, Guolong; Wang, Jun

作者机构:[Huang, Chuanzhen] Shandong Univ, Sch Mech Engn, Ctr Adv Jet Engn Technol CaJET, Jinan 250061, Shandong, Peoples R China.; Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS,2013,Vol.37,98-105

WOS被引数:20

资源类型:期刊论文

WOS:000314432100013

17. Node splitting algorithm of R*-tree based on self-adaptation clustering EI

作者:Sun, Dianzhu ;Sun, Yongwei ;Li, Yanrui ;Song, Yang

作者机构:[Sun, Dianzhu ;Sun, Yongwei ;Li, Yanrui ;Song, Yang ] School of Mechanical Engineering, Shandong University of Technology, Zibo 255091, China

来源:Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics,2013,Vol.39,Issue.3,344-348

资源类型:期刊论文

18. SiC单晶线锯切片及电镀锯丝制造技术的研究进展

作者:高玉飞;葛培琪;刘全斌;毕文波;

作者机构:[高玉飞;葛培琪;刘全斌;毕文波]山东大学机械工程学院;[高玉飞;葛培琪;刘全斌;毕文波]山东大学高效洁净机械制造教育部重点实验室;[高玉飞;葛培琪;刘全斌;毕文波]山东信远集团有限公司

来源:河北科技大学学报,Journal of Hebei University of Science and Technology,2013,Issue.06,501-506

资源类型:期刊论文

19. Comparison of tool-chip stress distributions in nano-machining of monocrystalline silicon and copper EI SCOPUS SCIE

作者:Ji, Chunhui; Shi, Jing; Liu, Zhanqiang; Wang, Yachao

作者机构:[Ji, Chunhui; Shi, Jing; Wang, Yachao] N Dakota State Univ, Dept Ind & Mfg Engn, Fargo, ND 58108 USA.; [Liu, Zhanqiang] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

来源:INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2013,Vol.77,30-39

WOS被引数:4

资源类型:期刊论文

WOS:000328710400004

20. 基于铣削力精确建模的工件表面让刀误差预测分析 EI CSCD SCOPUS

作者:宋戈;李剑峰;孙杰

作者机构:[宋戈] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[李剑峰] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[孙杰] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国

来源:机械工程学报,Jixie Gongcheng Xuebao/Journal of Mechanical Engineering,2013,Vol.49,Issue.21,168-175

资源类型:期刊论文

共 28 页, 552 条记录

TOP