按条件检索“27”条记录

已选条件: 出版年: 2013 × 机构: 机械工程学院 × 文献类型: 会议论文 ×
导出
  • 排序
  • 显示
1. Knowledge Modeling and Solving Strategy for Product Innovation Design

作者:Jiwen Chen;Jinsheng Zhang;Hongjuan Yang;

作者机构:[Jiwen Chen]Shandong Jianzhu University,School of Mechanical and Electronic Engineering;[Jinsheng Zhang]Shandong University,School of Mechanical Engineering;[Hongjuan Yang]Shandong Jianzhu University,School of Information & Electrical Engineering

来源:Proceedings of 2013 Asian Pacific Conference on Mechatronics and Control Engineering(APCMCE 2013),2013

资源类型:会议论文

2. Analysis of Leakage and Diffusion of Hazardous Chemicals Based on 3D Scene

作者:Zhang Wei Shuai;Han YunPeng;

作者机构:[Zhang Wei Shuai]JiNan PengBo Digital Security Technology Co.,LTD;[Han YunPeng]School of Mechanical Engineering, Shandong University

来源:Proceedings of 2013 2nd International Conference on Materials Science and Technology(ICMST 2013 Ⅱ),2013

资源类型:会议论文

3. 超声振动辅助铣削表面纹理建模及其摩擦学性能优化

作者:陶国灿;王涛;邢栋梁;张建华;

作者机构:[陶国灿;王涛;邢栋梁;张建华]山东大学机械工程学院

会议名称:第15届全国特种加工学术会议

来源:第15届全国特种加工学术会议论文集(下),2013

资源类型:会议论文

4. 复合微梁静态弯曲特性的尺寸效应

作者:李安庆;周慎杰;周莎莎;

作者机构:[李安庆;周慎杰;周莎莎]山东大学(千佛山校区)机械工程学院

会议名称:中国力学大会——2013

来源:中国力学大会——2013论文摘要集,2013

资源类型:会议论文

5. Multi-objective Optimization of Order Oriented Mixed-Model Assembly line sequencing Problem

作者:Zhi Li;Zhaoliang Jiang;Yumei Liu;

作者机构:[Zhi Li;Zhaoliang Jiang;Yumei Liu]School of Mechanical Engineering, Shandong University

来源:Proceedings of 2013 2nd International Conference on Key Engineering Materials and Computer Science(KEMCS 2013 Ⅱ),2013

资源类型:会议论文

6. 概念创新设计中的绿色策略系统构建

作者:林昇;李璐;王金军;

作者机构:[林昇]济南大学;[李璐]山东工艺美术学院;[王金军]山东大学机械工程学院

会议名称:2013国际工业设计研讨会暨第十八届全国工业设计学术年会

来源:2013国际工业设计研讨会暨第十八届全国工业设计学术年会论文集,2013

资源类型:会议论文

7. Design and Implementation of Collaborative Editing System Based on Web

作者:Xingxing WANG;Jingchang PAN;Xiaxu ZHANG;

作者机构:[Xingxing WANG;Jingchang PAN;Xiaxu ZHANG]School of Mechanical, Electrical and Information Engineering,Shandong University

来源:Proceedings of 2013 2nd International Conference on Key Engineering Materials and Computer Science(KEMCS 2013 Ⅱ),2013

资源类型:会议论文

8. 压电自适应微细电火花加工控制及电极补偿

作者:张亚;张勤河;付秀琢;白雪;张建华;

作者机构:[张亚;张勤河;付秀琢;白雪;张建华]山东大学机械工程学院高效洁净机械制造教育部重点实验室;[张亚;张勤河;付秀琢;白雪;张建华]齐鲁工业大学机械与汽车工程学院

会议名称:第15届全国特种加工学术会议

来源:第15届全国特种加工学术会议论文集(上),2013

资源类型:会议论文

9. Modeling and Control of Rate-Dependent Hysteresis in Piezoelectric Actuators

作者:ZHANG Guilin;ZHANG Chengjin;GU Jason;

作者机构:[ZHANG Guilin]School of Control Science and Engineering,Shandong University;[ZHANG Chengjin]School of Mechanical,Electrical and Information Engineering,Shandong University at Weihai;[GU Jason]Electrical and Computer Engineering,Dalhousie University

会议名称:第三十二届中国控制会议

来源:第三十二届中国控制会议论文集(B卷),2013

资源类型:会议论文

10. Design and Implementation of Workflow Creation and Scheduling Mechanism on Collaborative System

作者:ZHANG Xia-Xu;PAN Jing-Chang;Wang Jie;

作者机构:[ZHANG Xia-Xu;PAN Jing-Chang;Wang Jie]School of Mechanical, Electrical & Information Engineering, Shandong University

来源:Proceedings of 2013 2nd International Conference on Key Engineering Materials and Computer Science(KEMCS 2013 Ⅱ),2013

资源类型:会议论文

11. Stress Analysis of the Biomass Molding Mould Based on ANSYS

作者:Meng Jianfeng;Feng Baitao;Dong Yuping;

作者机构:[Meng Jianfeng;Feng Baitao;Dong Yuping]School of Mechanical Engineering, Shandong University

来源:Proceedings of 2013 2nd International Conference on Materials Science and Technology(ICMST 2013 Ⅱ),2013

资源类型:会议论文

12. The Material Nonlinear Analysis of Bioprosthetic Heart Valve on Suture Densities

作者:Xia Zhang;Quan Yuan;Jun Zhang;Xu Huang;Hua Cong;

作者机构:[Xia Zhang;Quan Yuan;Jun Zhang;Xu Huang;Hua Cong]School of Mechanical Engineering, Shandong University, Key Laboratory of High-efficiency and Clean Mechanical Manufacture, Shandong University Ministry of Education;[Xia Zhang;Quan Yuan;Jun Zhang;Xu Huang;Hua Cong]School of Physical Education,Shandong University;[Xia Zhang;Quan Yuan;Jun Zhang;Xu Huang;Hua Cong]School of Medicine ,Shandong University

来源:Proceedings of 2013 4th International Conference on Information Technology for Manufacturing Systems(ITMS 2013 Ⅳ),2013

资源类型:会议论文

13. 基于EVB的重型商用车辆辅助制动性能分析研究

作者:李玉生;郝新平;李维军;孙国栋;郝玉研;

作者机构:[李玉生;郝新平;李维军;孙国栋;郝玉研]中国重型汽车集团有限公司;[李玉生;郝新平;李维军;孙国栋;郝玉研]驻中国重型汽车集团公司军事代表室;[李玉生;郝新平;李维军;孙国栋;郝玉研]山东大学机械工程学院

会议名称:2013中国汽车工程学会年会

来源:2013中国汽车工程学会年会论文集,2013

资源类型:会议论文

14. 锅炉水冷壁管腐蚀爆裂失效分析

作者:王鹏飞;王威强;汤杰;苏成功;刘华东;

作者机构:[王鹏飞;王威强;汤杰;苏成功;刘华东]山东大学机械工程学院;[王鹏飞;王威强;汤杰;苏成功;刘华东]山东省特种设备安全工程技术研究中心;[王鹏飞;王威强;汤杰;苏成功;刘华东]山东大学特种设备安全保障与评价研究中心

会议名称:压力容器先进技术——第八届全国压力容器学术会议

来源:压力容器先进技术——第八届全国压力容器学术会议论文集,2013

资源类型:会议论文

15. Wear Mechanism of Si_3N_4/TiC Micro-nano-composite Ceramic Tool in Dry Machining of Nodular Cast Iron

作者:Zhijie Lü;Mingfeng Ding;Jun Zhao;

作者机构:[Zhijie Lü;Mingfeng Ding;Jun Zhao]School of Mechanical and Electronic Engineering,Shandong Jianzhu University;[Zhijie Lü;Mingfeng Ding;Jun Zhao]Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE,School of Mechanical Engineering,Shandong University

来源:Proceedings of 2013 2nd International Conference on Chemical,Mechanical and Materials Engineering(CMME 2013),2013

资源类型:会议论文

16. Research and Application of High Efficiency Machining Technology of Virtual Axis Machine Tool

作者:Qing-chun XIONG;Jie SUN;

作者机构:[Qing-chun XIONG]CAC Chengdu Aircraft Industrial (Group) Co., Ltd.;[Jie SUN]School of Mechanical Engineering, Shandong University

来源:Proceedings of 2013 International Conference on Electrical,Control and Automation Engineering(ECAE 2013),2013

资源类型:会议论文

17. Teaching Methods Exploration in Course of Interchangeability and Measurement Technology

作者:Chang-Rong Qu;Jian-Hong Gong;Xiu-Qi Zhang;Hui-gang Liu;

作者机构:[Chang-Rong Qu;Jian-Hong Gong;Xiu-Qi Zhang;Hui-gang Liu]School of Mechanical,Electrical and Information Engineering,ShanDong University;[Chang-Rong Qu;Jian-Hong Gong;Xiu-Qi Zhang;Hui-gang Liu]School of Translation Studies,ShanDong University

来源:Proceedings of 2013 International Conference on Education,Management and Social Science(ICEMSS 2013),2013

资源类型:会议论文

18. Preparation of Al_2O_3 Based Nano-micro Composite Gradient Self-lubricating Ceramic Tool Materials

作者:Mingdong Yi;Chonghai Xu;Zhaoqiang Chen;Guangyong Wu;

作者机构:[Mingdong Yi;Chonghai Xu;Zhaoqiang Chen;Guangyong Wu]School of Mechanical Engineering,Shandong University;[Mingdong Yi;Chonghai Xu;Zhaoqiang Chen;Guangyong Wu]Key Laboratory of Advanced Manufacturing and measurement & Control Technology for Light Industry in Universities of Shandong,Qilu University of technology

会议名称:国际材联2013国际先进材料大会

来源:国际材联2013国际先进材料大会论文集——主题2:结构材料,2013

资源类型:会议论文

19. Influences of Machining Parameters on Electrode Wear in Piezoelectric Self-adaptive Micro-EDM

作者:Xiuzhuo Fu;Liying Gao;Qinhe Zhang;

作者机构:[Xiuzhuo Fu;Liying Gao;Qinhe Zhang]School of Mechanical & Automotive Engineering,Shandong Polytechnic University;[Xiuzhuo Fu;Liying Gao;Qinhe Zhang]School of Mechanical Engineering,Shandong University

来源:Proceedings of 2013 2nd International Symposium on Materials Science and Engineering Technology(ISMSET 2013),2013

资源类型:会议论文

20. Cutting Force,Temperature and Wear Behavior in Dry Machining of Nodular Cast Iron with Si_3N_4/TiC Micro-nano-composite Ceramic Tool

作者:Zhijie Lü;Xianchun Song;Mingfeng Ding;Yonghui Zhou;

作者机构:[Zhijie Lü;Xianchun Song;Mingfeng Ding;Yonghui Zhou]School of Mechanical and Electronic Engineering,Shandong Jianzhu University;[Zhijie Lü;Xianchun Song;Mingfeng Ding;Yonghui Zhou]Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE,School of Mechanical Engineering,Shandong University

来源:Proceedings of 2013 2nd International Conference on Manufacture Engineering,Quality and Production System(ICMEQP 2013),2013

资源类型:会议论文

共 2 页, 27 条记录

TOP