按条件检索“140”条记录

已选条件: 资源类型: 期刊论文 × 资源类型: 会议论文 × 数据来源: 万方 × 出版年: 2013 × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
1. Analytical modeling and experimental investigation of tool and workpiece temperatures for interrupted cutting 1045 steel by inverse heat conduction method EI SCOPUS SCIE

作者:Fulin Jiang;Zhanqiang Liu;Yi Wan;Zhenyu Shi

作者机构:[Jiang, F] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Liu, Z] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Wan, Y] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[ Shi, Z] School of Mechanical Engineering, Shandong University, Jinan 250061, China

来源:Journal of Materials Processing Technology,JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2013,Vol.213,Issue.6,887-894

WOS被引数:19

资源类型:期刊论文

WOS:000317316500010

2. A novel image sensor for raised characters based on structured-light EI SCOPUS SCIE

作者:Li, X.;Lu, C.;Xiao, R.;Zhang, J.;Ding, J.

作者机构:[Li, X] Mechanical Engineering, Shandong University, Jinan, China;[ Lu, C] Mechanical Engineering, Shandong University, Jinan, China;[ Xiao, R] Mechanical Engineering, Shandong University, Jinan, China;[ Zhang, J] Mechanical Engineering, Shandong University, Jinan, China;[ Ding, J] Mechanical Engineering, Shandong University, Jinan, China

来源:Sensor Review,SENSOR REVIEW,2013,Vol.33,Issue.2,134-140

WOS被引数:2

资源类型:期刊论文

WOS:000317805500005

3. Damping research of fiber-reinforced resin mineral composite-based micromechanical modeling EI SCOPUS SCIE

作者:Tao Wang;Jianhua Zhang;Shimei Hao

作者机构:[Wang, T] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education of China, 17923 Jingshi Road, Jinan, 250061, China;[ Zhang, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education of China, 17923 Jingshi Road, Jinan, 250061, China;[ Hao, S] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education of China, 17923 Jingshi Road, Jinan, 250061, China

来源:Journal of Reinforced Plastics and Composites,JOURNAL OF REINFORCED PLASTICS AND COMPOSITES,2013,Vol.32,Issue.12,875-880

WOS被引数:4

资源类型:期刊论文

WOS:000319814800002

4. V_2O_5-WO_3-MoO_3/TiO_2催化剂在柴油机NH_3-SCR系统中的性能 EI SCOPUS

作者:高岩;栾涛;彭吉伟;XU Hongming;

作者机构:[高岩;栾涛;彭吉伟;XU Hongming]山东大学能源与动力工程学院;[高岩;栾涛;彭吉伟;XU Hongming]伯明翰大学机械学院

来源:化工学报,Huagong Xuebao/CIESC Journal,2013,Vol.64,Issue.9,3356-3366

资源类型:期刊论文

5. 供油系统对二甲醚发动机燃烧循环变动的影响 EI CSCD SCOPUS

作者:张强;李娜;张纪元;李国祥

作者机构:[张强] 山东大学能源与动力工程学院, 济南, 山东 250061, 中国.;[李娜] 山东大学能源与动力工程学院, 济南, 山东 250061, 中国.;[李国祥] 山东大学能源与动力工程学院, 济南, 山东 250061, 中国.;[张纪元] 潍柴动力股份有限公司, 潍坊, 山东 261001, 中国

来源:农业机械学报,Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery,2013,Vol.44,Issue.1,17-20+32

资源类型:期刊论文

6. Mixing of initially stratified miscible fluids in an eccentric stirred tank: Detached eddy simulation and volume of fluid study SCOPUS SCIE

作者:Feng Ling Yang;Shen Jie Zhou;Cui Xun Zhang;Gui Chao Wang

作者机构:[Yang, F.L] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, 250061, China;[ Zhou, S.J] School of Mechanical Engineering, Shandong University, Jinan, 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, 250061, China;[ Zhang, C.X] Tianli Drying Equipment Incorporated Company, Shandong Province Academy of Sciences, Jinan, 250014, China;[ Wang, G.C] School of Mechanical Engineering, Shandong University, Jinan, 250061, China

来源:The Korean journal of chemical engineering,KOREAN JOURNAL OF CHEMICAL ENGINEERING,2013,Vol.30,Issue.10,1843-1854

WOS被引数:5

资源类型:期刊论文

WOS:000325237400004

7. An integrated CNC accumulation system for automatic building-around-inserts EI SCOPUS SCIE

作者:Xuejin Zhao;Yayue Pan;Chi Zhou;Yong Chen;Charlie C.L. Wang

作者机构:[Zhao, X] Epstein Department of Industrial and Systems Engineering, University of Southern California, McClintock Avenue, GER 201, Los Angeles, CA 90089, United States, School of Mechanical Engineering, Shandong University, Ji'nan, Shandong, China;[ Pan, Y] Epstein Department of Industrial and Systems Engineering, University of Southern California, McClintock Avenue, GER 201, Los Angeles, CA 90089, United States;[ Zhou, C] Epstein Department of Industrial and Systems Engineering, University of Southern California, McClintock Avenue, GER 201, Los Angeles, CA 90089, United States;[ Chen, Y] Epstein Department of Industrial and Systems Engineering, University of Southern California, McClintock Avenue, GER 201, Los Angeles, CA 90089, United States;[ Wang, C.C.L] Department of Mechanical and Automation Engineering, Chinese University of Hong Kong, China

来源:Journal of manufacturing processes,JOURNAL OF MANUFACTURING PROCESSES,2013,Vol.15,Issue.4,432-443

WOS被引数:8

资源类型:期刊论文

WOS:000209272400006

8. 雷达高距离分辨率一维像目标识别 EI CSCD SCOPUS

作者:郭尊华;李达;张伯彦

作者机构:[郭尊华] 山东大学(威海)机电与信息工程学院, 威海, 山东 264209, 中国.;[李达] 武汉理工大学信息工程学院, 武汉, 湖北 430070, 中国.;[张伯彦] 北京无线电测量研究所, 北京 100854, 中国

来源:系统工程与电子技术,Xi Tong Gong Cheng Yu Dian Zi Ji Shu/Systems Engineering and Electronics,2013,Vol.35,Issue.1,53-60

资源类型:期刊论文

9. 7050-T7451铝合金预拉伸板材热膨胀系数变化规律及机理 EI CSCD SCOPUS

作者:黄晓明;孙杰;李剑峰;罗育果

作者机构:[黄晓明] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[孙杰] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[李剑峰] 山东大学机械工程学院, 高效洁净机械制造教育部重点实验室, 济南, 山东 250061, 中国.;[罗育果] 中航工业集团成都飞机制造有限责任公司, 成都, 四川 610092, 中国

来源:中国有色金属学报,Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals,2013,Vol.23,Issue.12,3282-3288

资源类型:期刊论文

10. Numerical simulation of multiphase flow field in abrasive waterjet machining EI SCOPUS

作者:Rongguo Hou;Chuanzhen Huang;Hongtao Zhu

作者机构:[Hou, R] Key Laboratory of High-efficiency and Clean Mechanical Manufacture, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Huang, C] Key Laboratory of High-efficiency and Clean Mechanical Manufacture, School of Mechanical Engineering, Shandong University, Jinan, 250061, China;[ Zhu, H] Key Laboratory of High-efficiency and Clean Mechanical Manufacture, School of Mechanical Engineering, Shandong University, Jinan, 250061, China

来源:International Journal of Abrasive Technology,International Journal of Abrasive Technology,2013,Vol.6,Issue.1,40-57

资源类型:期刊论文

11. SURFACE INTEGRITY OF HIGH-SPEED FACE MILLED Ti-6Al-4V ALLOY WITH PCD TOOLS EI SCOPUS SCIE

作者:Anhai Li;Jun Zhao;Yongwang Dong;Dong Wang;Xiaoxiao Chen

作者机构:[Li, A] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan 250061, China;[ Zhao, J] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan 250061, China;[ Dong, Y] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan 250061, China;[ Wang, D] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan 250061, China;[ Chen, X] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, 17923 Jingshi Road, Jinan 250061, China

来源:Machining Science and Technology,MACHINING SCIENCE AND TECHNOLOGY,2013,Vol.17,Issue.3,464-482

WOS被引数:4

资源类型:期刊论文

WOS:000327838700005

12. 电子冲击力锤的研制及在刀具模态测试中的应用 EI SCOPUS

作者:刘鲁宁[1];张杨广[1];史振宇[1];宋清华[1];刘战强[1]

作者机构:[刘鲁宁;张杨广;史振宇;宋清华;刘战强]山东大学 机械工程学院∥高效洁净机械制造教育部重点实验室,山东 济南250061,中国

来源:华南理工大学学报:自然科学版,Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science),2013,Vol.41,Issue.11,102-108

资源类型:期刊论文

13. 闭式液压系统油温分析及补油量确定 EI SCOPUS

作者:刘文平;王林涛;姜兆亮;

作者机构:[刘文平]山东大学机械工程学院;[王林涛]山东大学高效洁净机械制造教育部重点实验室;[姜兆亮]浙江大学机械工程学系

来源:中南大学学报(自然科学版),Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology),2013,Vol.44,Issue.9,3658-3664

资源类型:期刊论文

14. 离心式空气压缩机叶轮内湍流的数值模拟

作者:龚宝龙;李剑峰;贾秀杰;李方义;王光存;

作者机构:[龚宝龙;李剑峰;贾秀杰;李方义;王光存]山东大学机械工程学院高效洁净机械制造教育部重点实验室

来源:石油机械,China Petroleum Machinery,2013,Issue.09,37-40

资源类型:期刊论文

15. 微纳复合织构自润滑陶瓷刀具的制备及切削性能

作者:邢佑强;邓建新;冯秀亭;闫光远;程宏伟;

作者机构:[邢佑强;邓建新;冯秀亭;闫光远;程宏伟]山东大学机械工程学院

来源:航空制造技术,Aeronautical Manufacturing Technology,2013,Issue.06,42-46

资源类型:期刊论文

16. 基于PLC的试剂精密定量封装控制系统开发

作者:王家寅;冯显英;王晓彬;

作者机构:[王家寅;冯显英;王晓彬]山东大学机械工程学院

来源:组合机床与自动化加工技术,2013,Issue.10,80-82+86

资源类型:期刊论文

17. Machining efficiency of powder mixed near dry electrical discharge machining based on different material combinations of tool electrode and workpiece electrode EI SCOPUS SCIE

作者:Xue Bai;Qinhe Zhang;Jianhua Zhang;Dezheng Kong;Tingyi Yang

作者机构:[Bai, X] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan 250061, China;[ Zhang, Q] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan 250061, China;[ Zhang, J] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan 250061, China;[ Kong, D] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan 250061, China;[ Yang, T] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan 250061, China

来源:Journal of manufacturing processes,JOURNAL OF MANUFACTURING PROCESSES,2013,Vol.15,Issue.4,474-482

WOS被引数:12

资源类型:期刊论文

WOS:000209272400011

18. 基于IEC62061标准的SRECS风险评估与SIL分配

作者:黄祖广;张承瑞;赵钦志;胡天亮;

作者机构:[黄祖广;张承瑞;赵钦志;胡天亮]山东大学机械工程学院;[黄祖广;张承瑞;赵钦志;胡天亮]山东大学高效与洁净机械制造教育部重点实验室;[黄祖广;张承瑞;赵钦志;胡天亮]国家机床质量监督检验中心

来源:制造技术与机床,Manufacturing Technology & Machine Tool,2013,Issue.09,162-165

资源类型:期刊论文

19. 建筑垃圾处理技术与移动式破碎装备分析

作者:任虎存;张进生;王志;

作者机构:[任虎存;张进生;王志]山东大学机械工程学院;[任虎存;张进生;王志]山东大学建材与建设机械研究中心

来源:工程机械,Construction Machinery and Equipment,2013,Issue.02,42-45+8-9

资源类型:期刊论文

20. 树脂/石墨PEMFC双极板的制备工艺与性能研究综述 CSCD

作者:冀晓燕;李爱菊;王威强;赵旭荣

作者机构:[冀晓燕] 山东大学, 材料液固结构演变与加工教育部重点实验室, 济南, 山东 250061, 中国.;[李爱菊] 山东大学, 材料液固结构演变与加工教育部重点实验室, 济南, 山东 250061, 中国.;[赵旭荣] 山东大学, 材料液固结构演变与加工教育部重点实验室, 济南, 山东 250061, 中国.;[王威强] 山东大学机械工程学院, 济南, 山东 250061, 中国

来源:材料导报,Materials Review,2013,Vol.27,Issue.9A,87-90

资源类型:期刊论文

共 7 页, 140 条记录

TOP