按条件检索“552”条记录

已选条件: 资源类型: 期刊论文 × 资源类型: 会议论文 × 出版年: 2013 × 机构: 机械工程学院 ×
导出
  • 排序
  • 显示
81. 电子冲击力锤的研制及在刀具模态测试中的应用 EI SCOPUS

作者:刘鲁宁[1];张杨广[1];史振宇[1];宋清华[1];刘战强[1]

作者机构:[刘鲁宁;张杨广;史振宇;宋清华;刘战强]山东大学 机械工程学院∥高效洁净机械制造教育部重点实验室,山东 济南250061,中国

来源:华南理工大学学报:自然科学版,Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science),2013,Vol.41,Issue.11,102-108

资源类型:期刊论文

82. 闭式液压系统油温分析及补油量确定 EI SCOPUS

作者:刘文平;王林涛;姜兆亮;

作者机构:[刘文平]山东大学机械工程学院;[王林涛]山东大学高效洁净机械制造教育部重点实验室;[姜兆亮]浙江大学机械工程学系

来源:中南大学学报(自然科学版),Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology),2013,Vol.44,Issue.9,3658-3664

资源类型:期刊论文

83. Onset of triply diffusive convection in a Maxwell fluid saturated porous layer CPCI-S EI SCOPUS

作者:Zhao, Moli; Wang, Shaowei; Zhang, Qiangyong

作者机构:[Zhao, Moli; Zhang, Qiangyong] Shandong Univ, Geotech & Struct Engn Res Ctr, Jinan 250061, Shandong, Peoples R China.; [Wang, Shaowei] Shandong Univ, Sch Civil Engn, Dept Engn Mech, Jinan, Peoples R China.

会议名称:3rd International Conference on Civil Engineering, Architecture and Building Materials (CEABM 2013)

会议日期:MAY 24-26, 2013

来源:ADVANCES IN CIVIL AND INDUSTRIAL ENGINEERING, PTS 1-4,2013,Vol.353-356,2580-2585

WOS被引数:1

资源类型:会议论文;期刊论文

WOS:000336950101134

84. The Finite Element Analysis of the Column of wave-power generating device CPCI-S EI SCOPUS

作者:Liu, Yanjun; Sun, Xingwang; Zheng, Bo

作者机构:[Zheng, Bo] Shandong Univ, Ind Grp, Jinan 250100, Peoples R China.; [Liu, Yanjun; Sun, Xingwang] Shandong Univ China, Sch Mech Engn, Jinan 250061, Peoples R China.

会议名称:2nd International Conference on Energy, Environment and Sustainable Development (EESD 2012)

会议日期:OCT 12-14, 2012

来源:ADVANCES IN POWER AND ELECTRICAL ENGINEERING, PTS 1 AND 2,2013,Vol.614-615,546-549

资源类型:会议论文;期刊论文

WOS:000319300700103

85. Analysis of modal properties of spur planetary gears CPCI-S EI SCOPUS

作者:Wang, Jun Gang; Wang, Yong; Huo, Zhipu

作者机构:[Wang, Jun Gang; Wang, Yong; Huo, Zhipu] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

会议名称:2nd International Conference on Mechatronics and Applied Mechanics (ICMAM2012)2nd International Conference on Mechatronics and Applied Mechanics (ICMAM2012)

会议日期:DEC 06-07, 2012;DEC 08-09, 2012

来源:MECHATRONICS AND APPLIED MECHANICS II, PTS 1 AND 2,2013,Vol.300-301,978-981

资源类型:会议论文;期刊论文

WOS:000320567900189

86. Research of PZT excited discharge channel compression micro-EDM techniques EI SCOPUS

作者:Du, Lianming ;Zhang, Qinhe ;Zhang, Jianhua ;Zhang, Ya

作者机构:[Du, Lianming ;Zhang, Qinhe ;Zhang, Jianhua ;Zhang, Ya ] School of Mechanical Engineering, Shandong University, Jinan, China;[Zhang, Qinhe ;Zhang, Jianhua ;Zhang, Ya ] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of Ministry of Education, Shandong University, Jinan, China;[Du, Lianming ] School of Mechanical Engineering, University of Jinan, Jinan, China

会议名称:2013 International Conference on Intelligent System, Applied Materials and Control Technology, GSAMCT 2013

会议日期:13 January 2013 through 15 January 2013

来源:Advanced Materials Research,2013,Vol.645,363-366

资源类型:会议论文;期刊论文

87. Finite Element Residual Stress Analysis of Planetary Gear Tooth SCOPUS SCIE

作者:Wang, Jungang; Wang, Yong; Huo, Zhipu

作者机构:[Wang, Jungang; Wang, Yong; Huo, Zhipu] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.; [Wang, Jungang; Wang, Yong; Huo, Zhipu] Shandong Univ, Sch Mech Engn, Minist Educ, Key Lab High Efficiency & Clean Mech Mfg, Jinan 250061, Shandong, Peoples R China.

来源:ADVANCES IN MECHANICAL ENGINEERING,2013

WOS被引数:3

资源类型:期刊论文

WOS:000323268400001

88. MOSFET\'S 1/f noise\'s equivalent capacity model and the switching time analysis EI SCOPUS

作者:Fang, Xinkai ;Cao, Lijun

作者机构:[Fang, Xinkai ;Cao, Lijun ] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai, Wenhuaxilu No.180, Shandong, 264209, China

来源:Journal of Engineering Science and Technology Review,2013,Vol.6,Issue.2,45-48

资源类型:期刊论文

89. 基于分形级配的树脂矿物复合材料骨料尺寸效应研究

作者:王涛;张建华;郝世美;任秀华;何旭峰;

作者机构:[王涛;张建华;郝世美;任秀华;何旭峰]山东大学高效洁净机械制造教育部重点实验室;[王涛;张建华;郝世美;任秀华;何旭峰]山东大学机械工程学院;[王涛;张建华;郝世美;任秀华;何旭峰]南京理工大学工程技术研究院

来源:南京理工大学学报,2013,Issue.04,597-602

资源类型:期刊论文

90. 离心式空气压缩机叶轮内湍流的数值模拟

作者:龚宝龙;李剑峰;贾秀杰;李方义;王光存;

作者机构:[龚宝龙;李剑峰;贾秀杰;李方义;王光存]山东大学机械工程学院高效洁净机械制造教育部重点实验室

来源:石油机械,China Petroleum Machinery,2013,Issue.09,37-40

资源类型:期刊论文

91. 微纳复合织构自润滑陶瓷刀具的制备及切削性能

作者:邢佑强;邓建新;冯秀亭;闫光远;程宏伟;

作者机构:[邢佑强;邓建新;冯秀亭;闫光远;程宏伟]山东大学机械工程学院

来源:航空制造技术,Aeronautical Manufacturing Technology,2013,Issue.06,42-46

资源类型:期刊论文

92. 基于PLC的试剂精密定量封装控制系统开发

作者:王家寅;冯显英;王晓彬;

作者机构:[王家寅;冯显英;王晓彬]山东大学机械工程学院

来源:组合机床与自动化加工技术,2013,Issue.10,80-82+86

资源类型:期刊论文

93. Finite Element Analysis of Bioprosthetic Heart Valve on Suture Densities CPCI-S EI SCOPUS

作者:Zhang, Xia; Yuan, Quan; Huang, Xu; Ma, Haibo

作者机构:[Zhang, Xia; Yuan, Quan; Huang, Xu; Ma, Haibo] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China.

会议名称:3rd International Conference on Mechatronics and Intelligent Materials (MIM 2013)

会议日期:MAY 18-19, 2013

来源:MECHATRONICS AND INTELLIGENT MATERIALS III, PTS 1-3,2013,Vol.706-708,1348-1352

资源类型:会议论文;期刊论文

WOS:000323912100296

94. Coal-rock interface recognition based on MFCC and neural network EI

作者:Xu, Junkai ;Wang, Zengcai ;Zhang, Wanzhi ;He, Yanpeng

作者机构:[Xu, Junkai ;Wang, Zengcai ;Zhang, Wanzhi ;He, Yanpeng ] School of Mechanical Engineering, Shandong University, Jinan, China

来源:International Journal of Signal Processing, Image Processing and Pattern Recognition,2013,Vol.6,Issue.4,191-200

资源类型:期刊论文

95. RESIDUAL STRESS EVALUATION IN MACHINED SURFACES OF COPPER BY MOLECULAR DYNAMIC SIMULATION CPCI-S

作者:Wang, Yachao; Ji, Chunhui; Shi, Jing; Liu, Zhanqiang

作者机构:[Wang, Yachao; Shi, Jing] N Dakota State Univ, Ind & Mfg Engn Dept, Fargo, ND 58105 USA.; [Ji, Chunhui; Liu, Zhanqiang] Shandong Univ, Sch Mech Engn, Jinan 250100, Shandong, Peoples R China.

会议名称:ASME International Mechanical Engineering Congress and Exposition

会议日期:NOV 09-15, 2012

来源:INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 3, PTS A-C: DESIGN, MATERIALS, AND MANUFACTURING,20131061-1069

资源类型:会议论文

WOS:000350004500131

96. Application of a discrete transfer matrix method in analysis of acoustic attenuation performance of complex perforated pipe mufflers EI SCOPUS

作者:Rui, Huo ;Bei, Meng ;Lei, Zhang

作者机构:[Rui, Huo ;Bei, Meng ;Lei, Zhang ] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[Rui, Huo ;Bei, Meng ;Lei, Zhang ] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China

会议名称:2013 International Conference on Mechanics and Mechatronics, ICMM 2013

会议日期:4 October 2013 through 6 October 2013

来源:Applied Mechanics and Materials,2013,Vol.419,140-144

资源类型:会议论文;期刊论文

97. Machining efficiency of powder mixed near dry electrical discharge machining based on different material combinations of tool electrode and workpiece electrode EI SCOPUS SCIE

作者:Xue Bai;Qinhe Zhang;Jianhua Zhang;Dezheng Kong;Tingyi Yang

作者机构:[Bai, X] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan 250061, China;[ Zhang, Q] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan 250061, China;[ Zhang, J] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan 250061, China;[ Kong, D] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan 250061, China;[ Yang, T] School of Mechanical Engineering, Shandong University, Jinan 250061, China, Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan 250061, China

来源:Journal of manufacturing processes,JOURNAL OF MANUFACTURING PROCESSES,2013,Vol.15,Issue.4,474-482

WOS被引数:12

资源类型:期刊论文

WOS:000209272400011

98. Image compression using wavelet transform with lifting scheme and SPIHT in digital cameras for Bayer CFA EI

作者:Xie, Song-Zhao ;Wang, Cheng-You ;Yang, Zhi-Qiang

作者机构:[Xie, Song-Zhao ;Wang, Cheng-You ;Yang, Zhi-Qiang ] School of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China;[Yang, Zhi-Qiang ] Integrated Electronic Systems Lab Co. Ltd., Jinan 250100, China

会议名称:2013 International Conference on Wavelet Analysis and Pattern Recognition, ICWAPR 2013

会议日期:July 14, 2013 - July 17, 2013

来源:International Conference on Wavelet Analysis and Pattern Recognition,2013163-167

资源类型:会议论文

99. 基于IEC62061标准的SRECS风险评估与SIL分配

作者:黄祖广;张承瑞;赵钦志;胡天亮;

作者机构:[黄祖广;张承瑞;赵钦志;胡天亮]山东大学机械工程学院;[黄祖广;张承瑞;赵钦志;胡天亮]山东大学高效与洁净机械制造教育部重点实验室;[黄祖广;张承瑞;赵钦志;胡天亮]国家机床质量监督检验中心

来源:制造技术与机床,Manufacturing Technology & Machine Tool,2013,Issue.09,162-165

资源类型:期刊论文

100. Vibration Modal Analysis of the Upper Frame of Hydraulic Excavator CPCI-S EI SCOPUS

作者:Zuo, Cuipeng; Zhou, Yiqi; Huo, Rui; Wang, Li; Li, Hao

作者机构:[Zuo, Cuipeng; Zhou, Yiqi; Huo, Rui; Wang, Li; Li, Hao] Shandong Univ, Sch Mech Engn, Jinan 250061, Shandong, Peoples R China.

会议名称:2nd International Conference on Materials and Products Manufacturing Technology (ICMPMT 2012)

会议日期:SEP 22-23, 2012

来源:ADVANCED DESIGNS AND RESEARCHES FOR MANUFACTURING, PTS 1-3,2013,Vol.605-607,1203-1206

资源类型:会议论文;期刊论文

WOS:000318958000242

共 28 页, 552 条记录

TOP