标题:Determining the thermal shock elastic behavior of mullite ceramic regenerator material by ultrasonic testing
作者:Sun, Tiantian ;Wang, Yanxia ;Yun, Hai ;Zhang, Donghuan ;Shang, Qinghui
通讯作者:Wang, Yanxia
作者机构:[Sun, Tiantian ;Wang, Yanxia ;Yun, Hai ;Zhang, Donghuan ;Shang, Qinghui ] School of Traffic and Vehicle Engineering, Shandong University of Technology 更多
会议名称:5th Annual Meeting on Testing and Evaluation of Inorganic Materials, TEIM 2014
会议日期:April 16, 2014 - April 18, 2014
来源:Key Engineering Materials
出版年:2014
卷:633
页码:472-475
DOI:10.4028/www.scientific.net/KEM.633.472
摘要:Mullite material is a material commonly used in honeycomb regenerator, because in the process of using material under big temperature difference effect, so have a great demand for its thermal shock resistance. The used mullite ceramics were made by the direct solid phase sintering method, and the modulus of elasticity of the mullite ceramics measured by ultrasonic pulse-echo method in a thermal shock and thermal fatigue experiment, respectively. In the air-cooling condition, the study found the mullite ceramic without thermal shock that the longitudinal wave velocity and shear wave velocity respectively 3970(m/s) and 2492(m/s). After 45 times thermal shock of temperature difference of 800°C, longitudinal wave velocity and shear wave velocity decreased to 3910(m/s) and 2457(m/s), and the value of the modulus of elasticity changed 1020MPa. By observing the change of the elastic modulus value rule, can know the elastic deformation of thermal shock on the material performance of thermal shock damage. Moreover, the results can provide the data basis for the calculation of the residual strength and the numerical simulation of thermal stress.
© (2015) Trans Tech Publications, Switzerland.
收录类别:EI
资源类型:会议论文
TOP