标题:Influence of tool path strategies on friction and wear behavior of high-speed ball-end-milled hardened AISI D2 steel
作者:Huang, Weimin; Zhao, Jun; Ai, Xing; Wang, Guijie; Zhong, Xin
作者机构:[Huang, Weimin; Zhao, Jun; Ai, Xing; Wang, Guijie; Zhong, Xin] Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg, OfMOE, Jinan 25 更多
通讯作者:Zhao, Jun
通讯作者地址:[Zhao, J]Shandong Univ, Sch Mech Engn, Key Lab High Efficiency & Clean Mech Mfg, OfMOE, Jinan 250061, Shandong, Peoples R China;[Zhao, J]Shandong Univ 更多
来源:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
出版年:2018
卷:96
期:5-8
页码:2769-2779
DOI:10.1007/s00170-018-1774-7
关键词:Surface topography; Subsurface microstructure; Microhardness; Friction; and wear
摘要:This paper aims at exploring how tool path strategies influence the friction and wear behavior of high-speed ball-end-milled hardened AISI D2 steel. High-speed hard milling (HSHM) operations were conducted on a 5-axis machining center with three different tool path strategies. Dry sliding friction and wear tests of test samples versus GCr15 rings were performed utilizing a block-on-ring tester. Results showed that friction and wear behavior were closely associated with tool paths. Though the same cutting parameters were used, there is a numerical evidence on the difference in surface integrity for different tool path conditions. Low friction coefficient was obtained for surfaces with microgroove orientation perpendicular to sliding direction. Inclination extent of grain boundary can act as a wear resistance indicator. The subsurface softening degree is the most evident factor by which tool paths influence wear behavior. It determines the way of carbide spalling and the severity of plastic deformation and then the main wear mechanisms. This study indicates that the friction and wear performance of ball-end-milled surfaces suffering from known friction loads can be improved by appropriate selection of tool path strategies.
收录类别:EI;SCOPUS;SCIE
资源类型:期刊论文
原文链接:https://www.scopus.com/inward/record.uri?eid=2-s2.0-85042444726&doi=10.1007%2fs00170-018-1774-7&partnerID=40&md5=a46b9be830b6443304a0955eb9a23b72
TOP