标题:Effect of cutting parameters on wear behavior of coated tool and surface roughness in high-speed turning of 300M
作者:Zheng, Guangming; Xu, Rufeng; Cheng, Xiang; Zhao, Guoyong; Li, Li; Zhao, Jun
作者机构:[Zheng, Guangming; Xu, Rufeng; Cheng, Xiang; Zhao, Guoyong; Li, Li] Shandong Univ Technol, Sch Mech Engn, 266 West Xincun Rd, Zibo 255000, Peoples R C 更多
通讯作者:Zheng, Guangming
通讯作者地址:[Zheng, GM]Shandong Univ Technol, Sch Mech Engn, 266 West Xincun Rd, Zibo 255000, Peoples R China.
来源:MEASUREMENT
出版年:2018
卷:125
页码:99-108
DOI:10.1016/j.measurement.2018.04.078
关键词:Cutting parameter; Tool wear; Surface roughness; Coated tool; Cutting; force
摘要:The effect of cutting parameters on cutting force, cutting temperature, tool life, wear mechanism and surface roughness is studied and analyzed by single factor process. Experiment in high-speed dry turning of 300M high-strength steel with coated carbide tool is conducted. It is suggested that the cutting speed has the most important effect on the cutting force, cutting temperature and tool life, while the feed rate has great influence on surface roughness. The major wear mechanisms of the coated tool include abrasion, adhesion, oxidation and diffusion. In addition, the titanium oxide is present on the worn surface, which contributes to improve the hardness of the cutting zone, reduce the friction coefficient and play a role in insulation. So it reduces wear rate.
收录类别:EI;SCOPUS;SCIE
WOS核心被引频次:1
Scopus被引频次:1
资源类型:期刊论文
原文链接:https://www.scopus.com/inward/record.uri?eid=2-s2.0-85046482919&doi=10.1016%2fj.measurement.2018.04.078&partnerID=40&md5=b1f5838d76a193cc2bd93c403c46da4b
TOP