标题:Microstructure characteristics of laser alloying composite coatings in nitrogen protective atmosphere
作者:Wei Li;Huijun Yu;Chuanzhong Chen
作者机构:[Li, W] Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, School of Materials Science and Engineering, Shandong Univer 更多
通讯作者:Chen, C
通讯作者地址:[Chen, CZ]Shandong Univ, Sch Mat Sci & Engn, Minist Educ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Jinan 250061, Peoples R China.
来源:Science and Engineering of Composite Materials
出版年:2013
卷:20
期:2
页码:129-133
DOI:10.1515/secm-2012-0067
关键词:composites;laser alloying technique;surfaces;titanium alloys
摘要:This work is based on microstructural characteristics of Ti-B_4C-C laser alloying composite coatings on Ti-6Al-4V alloy in nitrogen protective atmosphere. Test results indicated that laser alloying of Ti-B_4C-C pre-placed powders on titanium alloys substrate can form ceramics reinforced hard alloying coatings, which increased the micro-hardness of the substrate. Test results also indicated that the Ti(CN) phase that was formed in situ in the upper coating was undeveloped dendritic, and thus reduced the possibility of crack formation in alloying coating. Moreover, the TiB and TiC phases were produced in alloying coating, which corresponded to its (210) and (220) crystal planes, respectively.
收录类别:EI;SCOPUS;SCIE
资源类型:期刊论文
原文链接:https://www.scopus.com/inward/record.uri?eid=2-s2.0-84879100828&doi=10.1515%2fsecm-2012-0067&partnerID=40&md5=2315b6d483086589389e3f62f7aaead2
TOP