标题:Estimation of tool wear and optimization of cutting parameters based on novel ANFIS-PSO method toward intelligent machining
作者:Xu L.; Huang C.; Li C.; Wang J.; Liu H.; Wang X.
作者机构:[Xu, L] Center for Advanced Jet Engineering Technologies (CaJET), Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of Educ 更多
通讯作者:Huang, C(chuanzhenh@sdu.edu.cn)
通讯作者地址:[Huang, C] Center for Advanced Jet Engineering Technologies (CaJET), Key Laboratory of High-efficiency and Clean Mechanical Manufacture (Ministry of E 更多
来源:Journal of Intelligent Manufacturing
出版年:2020
DOI:10.1007/s10845-020-01559-0
关键词:ANFIS; Multi-objective optimization; Tool wear; VCPSO
摘要:Compacted graphite iron (CGI) plays an important role in contemporary manufacturing of automobile engine, and coated tool is the best choice for milling of CGI. But studies about the estimation of the wear of coated tool are still rare and incomplete. As tool wear is the main factor that affects the quality of machined surface, in this study, we proposed an intelligent model-adaptive neuro fuzzy inference system (ANFIS) to estimate the tool wear, and ANFIS was learned by the improved particle swarm optimization (PSO) algorithm. As the PSO algorithm is easy to fall into the local minimum, the vibration and communication particle swarm optimization (VCPSO) algorithm was proposed by introducing the self-random vibration and inter-particle communication mechanisms. Besides that, to obtain the optimal combination of milling parameters, the multi-objective optimization based on minimum cutting power, surface roughness and maximum material removal rate (MRR) was studied using VCPSO algorithm. The experimental results showed that the ANFIS learned by VCPSO algorithm (ANFIS-VCPSO) has better performance for the estimation of tool wear compared with other intelligent models. The VCPSO algorithm was tested using Benchmark functions, and the results showed VCPSO algorithm has the global optimization ability. Meantime, the best combinations of milling parameters under different tool wear status were obtained through VCPSO algorithm. The proposed ANFIS-VCPSO model as a new intelligent model can be applied for real-time tool wear monitoring, which can improve the machining efficiency and prolong tool life. In order to meet the requirements of green and intelligent manufacturing, the best combination of milling parameters was also obtained in this work. © 2020, Springer Science+Business Media, LLC, part of Springer Nature.
收录类别:SCOPUS
Scopus被引频次:3
资源类型:期刊论文
原文链接:https://www.scopus.com/inward/record.uri?eid=2-s2.0-85082016865&doi=10.1007%2fs10845-020-01559-0&partnerID=40&md5=82796eee1077e768134954f7df6f4344
TOP