标题:Failure Characteristics of Floor Mining-Induced Damage Under Deep Different Dip Angles of Coal Seam
作者:Liu, Weitao ;Du, Yanhui ;Liu, Yuben ;Pang, Lifu
作者机构:[Liu, Weitao ;Du, Yanhui ;Liu, Yuben ;Pang, Lifu ] Shandong University of Science and Technology, Qingdao; Shandong; 266590, China
通讯作者:Du, Yanhui
来源:Geotechnical and Geological Engineering
出版年:2019
卷:37
期:2
页码:985-994
DOI:10.1007/s10706-018-0666-9
摘要:To research the failure characteristic of coal seam floor with a certain dip angle and the monitoring and prediction of water inrush. Taking the coal mining face in Xinhong 3#Mine as the study object, a water inrush model of water floor under pressure of six different angles in coal layers was established. Using FLAC3D numerical simulation as a method of making a comprehensive comparative study about the depth and range of the mining failure depth of different angle in coal layers. The study results showed that the damage from of the floor in deep area after mining was quite different from the one in the shallow area. The plastic failure depth of floor increases with the increase of working face width, the vertical stress of the bottom plate of the working face is increasing gradually; the plastic failure depth of floor increased to the maximum and then decreased with the increase of coal seam dip angle. It will reach the maximum failure depth at 30°, and is easy to occur shear failure. The maximum failure depth is up to 28.77 m, which is very close to field monitoring result, it can provide the basis for preventing water inrush of mine caused by deep mining floor.
© 2018, Springer Nature Switzerland AG.
收录类别:EI
资源类型:期刊论文
TOP