标题:Epoxy Resin/POSS Nanocomposites with Toughness and Thermal Stability
作者:Zhang, Chengxiang; Li, Tingxi; Song, Hui; Han, Yongqin; Su, Haibo; Wang, Yanmin; Wang, Qing
作者机构:[Zhang, Chengxiang; Li, Tingxi; Song, Hui; Han, Yongqin; Su, Haibo; Wang, Yanmin; Wang, Qing] Shandong Univ Sci & Technol, Coll Mat Sci & Engn, Qingda 更多
通讯作者:Li, TX
通讯作者地址:[Li, TX]Shandong Univ Sci & Technol, Coll Mat Sci & Engn, Qingdao 266590, Peoples R China.
来源:JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY
出版年:2017
卷:30
期:1
页码:25-31
DOI:10.2494/photopolymer.30.25
关键词:Epoxy resin; POSS nano-particles; Modification; Toughening
摘要:To improve the mechanical property of epoxy resin (EP) had received intensive attentions in engineering industries at present. For this reason, three kinds of epoxy resin nanocomposites were prepared by incorporating different PUSS nanoparticles. This study showed the toughening effect of three kind of nanocomposites and analyzed the different toughening mechanism. The thermomechanical properties and impact strength of the samples were investigated by means of dynamic thermomechanical analysis (DMA) and XJJ-50 type tester. The thermal stability was examined by thermal gravimetric analysis (TGA) and scanning electron microscopy (SEM) was used to characterize the morphology of fracture surfaces for composites. When introduction of Octavinyl-POSS (OV-POSS), DodecaPhenyl-POSS (DP-POSS) and Methacryl-POSS (M-POSS) was 1.0 phr, the values of impact strength reach 22.60 kJ/m(2), 24.90 kJ/m(2), 29.61 kJ/m(2) and the values of storage modulus get to 2.88 GPa, 2.25 GPa, 2.14 GPa respectively. It can be observed that M-POSS has the most obvious effect when introduced into the same amount of POSS. Meanwhile, adding nanoparticles has no obvious impact on the excellent thermal stability of EP.
收录类别:SCIE
资源类型:期刊论文
TOP